历史时期黄河下游河道演变规律与淮河灾害治理

历史时期黄河下游河道演变规律表明,河流从沿程淤积到河口延伸、再到溯源淤积的自适应过程,在1000a、100a、50a、10a等各种时间尺度上均可能发生,这对淮河水系改造的可行性论证、方案设计等有重要指导意义。     

Examination of dioxin fluxes recorded in dated aquatic-sediment cores in the Kanto region of Japan using multivariate data analysis

Past dioxin (coplanar polychlorinated biphenyl (Co-PCB), 2,3,7,8-substituted polychlorinated dibenzo-p-dioxin (PCDD) and 2,3,7,8-substituted polychlorinated dibenzofuran (PCDF)) fluxes recorded in dated aquatic-sediment cores were analyzed using principal component analysis (PCA). The data set consisted of samples from four cores collected from the Kanto region of Japan. Time trends and spatial differences in the dioxin flux were examined, and the potential relationship to emission sources was investigated. Twenty-five compounds and 58 core slices, corresponding to the later half of the 20th century, were subjected to the analysis. The PCA of both log-transformed and maximum-value-standardized data successfully divided the dioxin compounds into a small number of groups, and three similar clusters of Co-PCBs, PCDDs and penta- to hepta-CDFs were identified. PCB formulations used in the past are judged to have been responsible for the major part of the Co-PCB flux recorded in the sediment cores. However, the relationship to emission sources needs further investigation. It is suggested that most 2,3,7,8-substituted PCDDs and PCDFs are different from Co-PCBs in their emission sources or movements in the environment. The subcore clusters obtained from the PCA of log-transformed data show that the cores from different sampling areas exhibited distinct dioxin fluxes and compositions. Common time trends among the cores were more effectively summarized by the PCA of maximum-value-standardized data focusing on relative time trends. PC scores show that recently the flux of each dioxin compound in the four cores has been generally declining after having reached a peak.     

Evaluating non-equilibrium solute transport in small soil columns

Displacement studies on leaching of bromide and two pesticides (atrazine and isoproturon) were conducted under unsaturated steady state flow conditions in 24 small undisturbed soil columns (5.7 cm in diameter and 10 cm long) each collected from two sites differing in soil structure and organic carbon content in North Germany. There were large and irregular variabilities in the characteristics of both soils, as well as in the shapes of breakthrough curves (BTCs) of different columns, including some with early breakthrough and increased tailing, qualitatively indicating the presence of preferential flow. It was estimated that one preferential flow column (PFC) at site A, and four at site B, contributed, respectively to 11% and 58% of the accumulated leached fraction and to more than 80% of the maximum observed standard deviation (SD) in the field-scale concentration and mass flux of pesticides at two sites. The bromide BTCs of two sites were analyzed with the equilibrium convection-dispersion equation (CDE) and a non-equilibrium two-region/mobile-immobile model. Transport parameters of these models for individual BTCs were determined using a curve fitting program, CXTFIT, and by the time moment method. For the CDE based equilibrium model, the mean values of retardation factor, R, considered separately for all columns, PFCs or non-preferential flow columns (NPFCs) were comparable for the two methods; significant differences were observed in the values of dispersion coefficients of two sites using the two estimation methods. It was inferred from the estimated parameters of non-equilibrium model that 5-12% of water at site A, and 12% at site B, was immobile during displacement in NPFCs. The corresponding values for PFCs of two sites were much larger, ranging from 25% to 51% by CXTFIT and from 24% to 72% by the moment method, suggesting the role of certain mechanisms other than immobile water in higher degrees of non-equilibrium in these columns. Peclet numbers in PFCs of both sites were consistently smaller than five, indicating the inadequacy of the non-equilibrium model to incorporate the effect of all forms of non-equilibrium in PFCs. Overall, the BTCs of individual NPFCs, PFCs and of field average concentration at the two sites were better reproduced with parameters obtained from CXTFIT than by the moment method. The moment method failed to capture the peak concentrations in PFCs, but tended to describe the desorption and tail branches of BTCs better than the curve fitting approach.     

SBR工艺设计经验探讨

提出了SBR工艺中,反应池容积、反应时间以及需氧量的计算方法和设计经验。同时,在研读和对比国内外相关资料的基础上,探讨了SBR工艺发生污泥膨胀的可能性和原因,介绍了控制方法与措施。     

烟台市大气臭氧近地面分布特征初探

利用2008年7月-2009年6月烟台市11个子站的大气臭氧自动连续监测数据,时臭氧浓度的区域分布、季节变化、日变化、与二氧化氮浓度相关性等特征进行分析．结果表明：①郊区臭氧浓度高于市中心区;②臭氧浓度季节变化明显,其大小依次排排列为春季、夏季、秋季和冬季;③臭氧浓度具有明显的日变化,一般在午后浓度较高。夜晚较低,早晨...     

房地产开发项目环境影响评价的探讨

根据房地产开发项目的特点,阐述该项目施工期、运行期分别对环境产生的不良影响,着重分析施工期扬尘、运行期废水污染情况,以及减缓该不利影响的措施,最后总结房地产开发项目环境影响评价还须进一步探讨的问题。     

API Standard 521 new alternative method to evaluate fire relief for pressure relief device sizing and depressuring system design

Since the 1950's, API Standards have provided guidance on determining relief loads for equipment exposed to pool fires. The API method is empirical based on tests performed in the 1940's. There is increasingly widespread interest in analytical methods based on heat transfer principles to model fire heat input. The API committee agreed to include an analytical method in the 6th edition of API Standard 521 to establish relief loads for pressure relief devices and to design depressuring systems for the fire scenario. The analytical method provides more flexibility than the empirical method but has limitations (e.g., too many permutations are possible leading to potential under-sizing of the pressure relief device).This paper discusses the basis for the empirical method in API Standard 521 and provides comparisons of the empirical and analytical method with two more recent large-scale pool fire tests. This pool fire test data indicates that the empirical method will provide a conservative estimate of pool fire heat input for most applications and is still the method of choice when designing pressure relief systems. However, these recent tests indicate the empirical method needs to be modified when a vessel or equipment is partially confined by adjacent embankments or walls equal or greater than the vessel height. In such cases, the wetted area exponent should be 1.0 instead of 0.82.The analytical method is useful in determining time-versus-temperature profiles for heating unwetted vessels of varying wall thicknesses and materials of construction. These profiles, which depend upon the type of fire (e.g., unconfined pool fire, jet fire, etc.), can be combined with tensile strength and stress-rupture data to specify a depressuring system's pressure-versus-time profile. This will minimize failure and/or mitigate the effects of failure due to overheating from fire exposure.     

Analysis of the global warming dynamics from temperature time series

Global warming is the observed increase of the average temperature of the Earth. The primary cause of this phenomenon is the release of the greenhouse gases by burning of fossil fuels, land cleaning, agriculture, among others, leading to the increase of the so-called greenhouse effect. An approach to deal with this important problem is the time series analysis. In this regard, different techniques can be applied to evaluate the global warming dynamics. This kind of analysis allows one to make better predictions increasing our comprehension of the phenomenon. This article applies nonlinear tools to analyze temperature time series establishing state space reconstruction and prediction. Since noise contamination is unavoidable in data acquisition, it is important to employ robust techniques. The method of delay coordinates is employed for state space reconstruction and delay parameters are evaluated using the method of average mutual information and the method of false nearest neighbors. Afterwards, the simple nonlinear prediction method is employed to estimate temperatures of the future. Temperature time series from different places of the planet are used. Initially, the approach is verified considering known parts of the time series and afterwards, results are extrapolated for future values estimating temperature until 2028. Results show that these techniques are interesting to estimate temperature time history, presenting coherent estimations.     

低噪声降频器可靠性试验设计

可靠性技术是提高产品质量的有效手段,具有广阔的应用前景。本文结合可靠性技术对低噪声降频器进行可靠性试验并对故障数据进行分析,结果表明,抽取的高频头样品合格率达96.25%,平均无故障时间超过5000小时。     

Real Time PCR研究进展及其在海洋病原生物检测中的应用

Real Time PCR,即实时监测PCR扩增产物并进行解析的方法,目前已广泛应用于分子生物学研究的各个领域.Real Time PCR技术秉承及发展了普通PCR的快速、高灵敏度检出等优点,同时克服了普通PCR不能准确定量、容易污染等缺点,无需在反应结束后通过电泳操作确认扩增产物.目前,Real Time PCR可设计多对引物在同一反应体系中同时对多个靶基因进行扩增,实现多莺实时定量检测.Real Time PCR使PCR技术发生了质的飞跃,扩展了PCR技术的应用范畴,是一种具有划时代意义的技术.本文主要介绍Real Time PCR的主要原理、解析方法、技术发展趋势及其在海洋病原生物检测方面的应用.