Preparation of hydrophobic hierarchical pore carbon–silica composite and its adsorption performance toward volatile organic compounds

Carbon–silica materials with hierarchical pores consisting of micropores and mesopores were prepared by introducing nanocarbon microspheres derived from biomass sugar into silica gel channels in a hydrothermal environment.The physicochemical properties of the materials were characterized by nitrogen physical adsorption(BET),scanning electron microscopy(SEM),and thermogravimetric(TG),and the adsorption properties of various organic waste gases were investigated.The results showed that microporous carbon materials were introduced successfully into the silica gel channels,thus showing the high adsorption capacity of activated carbon in high humidity organic waste gas,and the high stability and mechanical strength of the silica gel.The dynamic adsorption behavior confirmed that the carbon–silica material had excellent adsorption capacity for different volatile organic compounds(VOCs).Furthermore,the carbon–silica material exhibited excellent desorption characteristics:adsorbed toluene was completely desorbed at 150℃,thereby showing superior regeneration characteristics.Both features were attributed to the formation of hierarchical pores.     

Ozone pollution characteristics and sensitivity analysis using an observation-based model in Nanjing, Yangtze River Delta Region of China

Ground-level ozone (O₃) has become a critical pollutant impeding air quality improvement in Yangtze River Delta region of China. In this study, we present O₃ pollution characteristics based on one-year online measurements during 2016 at an urban site in Nanjing, Jiangsu Province. Then, the sensitivity of O₃ to its precursors during 2 O₃ pollution episodes in August was analyzed using a box model based on observation (OBM). The relative incremental reactivity (RIR) of hydrocarbons was larger than other precursors, suggesting that hydrocarbons played the dominant role in O₃ formation. The RIR values for NO_X ranged from –0.41%/% to 0.19%/%. The O₃ sensitivity was also analyzed based on relationship of simulated O₃ production rates with reductions of VOC and NO_X derived from scenario analyses. Simulation results illustrate that O₃ formation was between VOCs-limited and transition regime. Xylenes and light alkenes were found to be key species in O₃ formation according to RIR values, and their sources were determined using the Positive Matrix Factorization (PMF) model. Paints and solvent use was the largest contributor to xylenes (54%), while petrochemical industry was the most important source to propene (82%). Discussions on VOCs and NO_X reduction schemes suggest that the 5% O₃ control goal can be achieved by reducing VOCs by 20%. To obtain 10% O₃ control goal, VOCs need to be reduced by 30% with VOCs/NO_X larger than 3:1.     

郑州市VOCs组分排放清单及其臭氧生成潜势

基于人为源挥发性有机物（VOCs）活动水平统计和源成分谱梳理,采用排放因子法,建立了郑州市2016年VOCs组分排放清单,评估了各类源臭氧生成潜势（OFP）.结果表明,2016年郑州市人为源VOCs排放总量为96215.3 t,排放量最高的是道路移动源（29.7%）,其次是有机溶剂使用源（28.1%）;排放量最高的组分是烷烃（29.8%）,其次是芳香烃（29.0%）.郑州市人为源VOCs的OFP为341291.0 t,贡献最高的排放源是道路移动源（30.5%）,其次是溶剂使用源（28.8%）,其中轻型汽油车、内墙涂料使用、机动车表面涂层、加油站装卸油和非金属矿物制造是OFP的主要次级排放源,也是郑州市降低臭氧污染时需重点管控的VOCs排放源.对于VOCs种类而言,贡献较高的是芳香烃（42.8%）,其次是烯烃（38.9%）,未来应加强对间/对-二甲苯、丙烯和乙烯等物种排放来源的控制.     

硅胶表面TEOS疏水化改性及吸附VOCs特性

以正硅酸乙酯（TEOS）为疏水改性剂,通过硅胶表面的羟基接枝反应,得到具备一定疏水性的改性硅胶;利用BET、FT-IR、XRD和TG-DTG等手段对改性硅胶的结构及稳定性进行了表征;在此基础上考察了改性硅胶对各类有机废气的吸附性能.结果表明,TEOS成功接枝在了硅胶表面,改性硅胶不仅具备一定的疏水性,而且机械强度增加到原来的66.85%,稳定性也都得到了提高; 550℃空气下焙烧后的改性硅胶仍具有疏水性且吸附容量是焙烧之前的2倍;在高湿度高浓度的废气治理中,TEOS改性硅胶表现出更高的吸附能力和优良的热再生性能.高浓度下改性硅胶的吸附容量是低浓度下的10倍且不受水汽的影响;改性硅胶循环10次的吸附/脱附几乎不变,且在一定条件下,15~30min就达到90%的脱附率.     

含菌气溶胶扩散对人群的潜在影响风险

为分析生物气溶胶释放对人群潜在影响风险的情况,利用CALPUFF模型定量模拟了2019年7月24~8月20日中牧兰州生物药厂含菌气溶胶扩散、浓度空间分布、对人群潜在健康风险,并结合公开报道的检测数据开展验证.结果显示：生物药厂的含菌气溶胶排放源附近高值区主要集中于厂区四周,影响范围主要以厂区为中心,并向四周逐渐扩散;检测结果中兰州兽研所1#,兰州大学2#地区健康风险比例41.49：1,在模拟的相对风险大小的误差区间（36.15±8.48）范围内,说明本研究含菌气溶胶对人群潜在影响风险的模拟结果可信.     

秸秆还田方式对东北农田土壤NH3挥发和N2O排放的影响

秸秆还田是有效利用资源、增加土壤有机质含量和培肥地力的有效措施,但也会影响土壤NH₃挥发和N₂O的排放.探索不同秸秆还田方式对NH₃挥发和N₂O排放的影响对于减少土壤氮素损失和保护生态环境具有重要意义.采用田间小区试验,利用Los Gatos Research（LGR）超便携NH₃分析仪和密闭式静态箱-气相色谱法探究不同秸秆还田方式下土壤NH₃挥发和N₂O排放的特征,试验设4个处理（覆盖还田,即表面覆盖玉米秸秆,0~20和20~40 cm土壤分层扰动后填回,记为JG0-0;常规还田,即秸秆与0~20 cm土壤混合,20~40 cm土壤扰动后填回,记为JG0-20;深还田,秸秆与20~40 cm土壤混合,0~20 cm土壤挖出后填回,记为JG20-40;对照处理,即无玉米秸秆还田,0~20和20~40 cm土壤分层扰动后填回,记为CK）.结果表明:①相比于CK,不同秸秆还田方式均显著降低了土壤NH₃挥发量,增加了土壤N₂O排放量.与CK相比,JG0-0、JG0-20和JG20-40处理下土壤NH₃累积排放量分别减少了12.38%、9.87%和5.73%;土壤N₂O累积排放量分别增加了30.19%、82.82%和36.53%,其中JG0-0和JG20-40处理之间无显著性差异.②JG20-40处理下玉米产量显著高于其他处理,比CK增加了23.15%,JG0-0处理下玉米产量高于CK和JG0-20处理,但并未达到显著水平.③对于NH₃和N₂O这两种气体的总累积排放量,各处理间均达到显著性差异.与CK相比,JG0-0、JG0-20和JG20-40处理下NH₃和N₂O总累积排放量分别增加了16.67%、52.08%和22.92%.④不同秸秆还田方式下的氮素气态损失率均高于CK,JG0-0、JG0-20和JG20-40处理下氮素气态损失率分别比CK增加了17.50%、52.50%和22.50%.因此,综合考虑土壤NH₃挥发量、N₂O排放量和玉米产量等因素,JG0-0处理优于JG20-40、JG0-20处理.      

京津冀及周边地区水泥工业大气污染控制分析

以京津冀及周边地区水泥工业为研究对象,基于产排污系数法,建立了水泥工业主要大气污染物排放计算方法,对2016年该地区水泥工业主要大气污染物排放控制水平进行了分析.结果表明：京津冀及周边地区2016年水泥工业SO₂、NO_x、PM（有组织）排放量分别达到3.2×10⁴t、23.9×10⁴t、9.7×10⁴t,较2015年分别减少24.1%、18.2%、27.2%,各项污染物大幅下降.水泥工业PM无组织排放量占PM总排放量的45.4%,仍需要采取集中收集的方式加强治理.山东、河南是水泥工业SO₂、NO_x、PM、PM₁₀、PM_2.5重点排放来源,应通过化解过剩产能降低污染排放.从各工艺来看,新型干法工艺应考虑采用高效脱氮脱硫技术、协同处置技术、高效大型袋式除尘技术等新技术,进一步降低各项污染物的排放量;粉磨站也需进一步提高污染治理水平.     

Optimal charges on river effluent from lumped and distributed sources

We propose a modelling framework for the design of a Pigouvian effluent tax, in an environmental management problem implicating several economic agents located in a river basin. The proposed charging system allows for the agents' geographical position relative to the river's sections, at which environmental standards are to be enforced, and takes into account the possible different market structures within which the agents are operating. In particular, we consider industrial agents competing on an oligopolistic market, and a set of farmers acting as price takers on a large market. A regional authority's goal is to induce agents to some sort of cooperation which would result in the satisfaction of the common environmental constraints. The economic process on one side, and the pollution transport and accumulation on the other, constitute two dynamic processes in two different time scales. As the economic process is much slower than the other process we can neglect the latter's transients and concentrate on the time invariant steady state solutions to the transportation equation. The model thus constructed has some noncooperative game and optimal control problem's features with space being the ‘running’ variable. This revised version was published online in July 2006 with corrections to the Cover Date.     

Emissions of gaseous and particulate pollutants in a port and harbour region in India

Ports can generate large quantity of pollutants in the atmosphere due to various activities like loading and unloading,transportation, and construction operations. Determination of the character and quantity of emissions from individual sources is an essential step in any project to control and minimize the emissions.In this study a detailed emission inventory of total suspendedparticulate matter (TSP), particulate matter less than 10 m(PM₁₀), sulfur dioxide (SO₂) and nitrogen oxides (NO_x) for a port and harbour project near Mumbai is compiled. Results show that the total annual average contributions of TSP and PM₁₀ from all the port activitieswere 872 and 221 t yr^-1, respectively. Annual average emissions of gaseous pollutants SO₂ and NO_xwere 56 and 397 t yr^-1, respectively, calculatedby using emission factors for different port activities. The maximum TSP emission (419 t yr ^-1) was from paved roads, while the least (0.4 t yr^-1) was from bulk handling activity. The maximum PM₁₀ emission (123 t yr^-1) was from unpaved roads and minimum (0.2 t yr^-1) from bulk handling operations. Similarly the ratio of TSP and PM₁₀ emission was highest (5.18) from paved roads and least (2.17) from bulk handling operations. Regression relation was derivedfrom existing emission data of TSP and PM₁₀ from variousport activities. Good correlation was observed between TSP andPM₁₀ having regression coefficient >0.8.     

MERCURY EMISSION INVENTORY IN ONTARIO

Mercury is released to the environment from various anthropogenic and natural sources. This work is a compilation of mercury emissions from anthropogenic sources in Ontario, Canada. The goal of our study was to identify all sources of mercury, and develop an emission inventory of anthropogenic mercury in Ontario. The result of our investigation revealed that combustion of fossil fuels and emissions from landfill sites are two primary sources of mercury to the atmosphere. Other sources of significance are emissions from waste incinerators, various industrial activities, and cement production. Total mercury emission in Ontario is estimated as 4100 kg per year.