Optimization of C/N ratio for preparation of protein-rich and multi-enzymes feed thallus through synergic fermentation of mixed distillers'grains

A new procedure of determining optimal C/N (the rate of carbon source to nitrogen source) of mixed distillers' grains for combined bacteria synergic fermentation is established. At the same time an improved method evaluating bacteria growth, called method of dry cell weighing by filtering is developed. For each combination of C and N , their initial and residual contents before and after fermentation respectively are determined. Then followed the calculation of utilization of C and N sources by the compound bacteria. The optimal C/N is finally located from among the utilization of C and N of several combinations and the weight of produced mass of oven-dried thallus The conditions of fermentation are: inoculum size 10%, temperature 30.0℃, rotational speed 170 r/min, shake culture time 48h. The best results obtained from orthogonal experiments are: maximum mass of oven dried thallus is 14.693g in a liter liquid medium, maximum utilization rate of carbon source is 98.13% and maximum utilization rate of nitrogen is 78.14%. Optimal C/N is 5.1.     

A metal-OH group modification strategy to prepare highly-hydrophobic MIL-53-Al for efficient acetone capture under humid conditions

A series of highly-hydrophobic MIL-53-Al (MIL = Materials of Institut Lavoisier) frameworks synthesized via decoration of the Al-OH groups by alkyl phosphonic acid were developed as adsorbents for removing acetone from humid gas streams. The newly prepared materials were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), N₂ adsorption-desorption and thermogravimetric analysis (TGA). Their adsorption behaviors toward acetone vapor under dry and wet conditions were studied subsequently. Results showed that alkyl phosphonic acid was successfully grafted into MIL-53-Al skeleton through coordinating interaction with Al³⁺ generating [email protected]_x (x = 12, 14, 18). The [email protected]_x exhibited similar crystal structure and thermal stability to parent MIL-53-Al. Furthermore, the modified materials showed significantly enhanced hydrophobicity. The water vapor uptake of [email protected]₁₄ decreased by 72.55% at 75% relative humidity (RH). Dynamic adsorption experiments demonstrated that water vapor had almost no effect on the acetone adsorption performance of [email protected]₁₄. Under the condition of 90% RH, the acetone adsorption capacity of [email protected]₁₄ was 102.98% higher than that of MIL-53-Al. Notably, [email protected]₁₄ presented excellent adsorption reversibility and regeneration performance in 10 adsorption-desorption cycles. Taken together, the strategy of metal-OH group modification is an attractive way to improve the acetone adsorption performance over metal-organic frameworks (MOFs) under humid conditions. Besides, [email protected]₁₄ would be deemed as a promising candidate for capturing acetone in high moisture environment.     

Effect of acid precipitation on leaching of nutritionsand aluminium from forest soils

ＥｆｆｅｃｔｏｆａｃｉｄｐｒｅｃｉｐｉｔａｔｉｏｎｏｎｌｅａｃｈｉｎｇｏｆｎｕｔｒｉｔｉｏｎｓａｎｄａｌｕｍｉｎｉｕｍｆｒｏｍｆｏｒｅｓｔｓｏｉｌｓＤａｉＺｈａｏｈｕａ；ＬｉａｏＢｏｈａｎ；ＷａｎｇＺｈｉｈａｉＷａｎｇＸｉｎｇｊｕｎ；ＬｉｕＹｕｎｘｉ...     

石油亚砜萃取巯基醋酸的研究

对石油亚砜(PSO)萃取巯基醋酸的条件和影响进行了实验研究,确定了石油亚砜通过氢键和巯基醋酸形成的萃合物的组成.为从废水中回收巯基醋酸以及石油硫醚的综合利用提供了依据.     

金属铁还原降解2,4-二硝基甲苯的实验研究

研究了金属铁对2,4-二硝基甲苯(2,4-DNT)的还原降解情况.实验结果表明,2,4-DNT的还原降解与溶液初始pH值、初始浓度和溶解氧等因素有关.氯离子能消除金属铁的钝化现象.金属铁表面附载的铜对2,4-DNT的还原降解具有催化作用.     

不同地域天然伊利石表面酸碱特性的比较

利用电位滴定技术和恒定容量表面络合模式表征不同来源天然伊利石的表面酸碱性质。鉴于固体基质在酸量滴定过程中发生溶解，相应的滴定上清液被视为体系空白。考虑到水解铝、硅酸和伊利石表面活性位之间的表面络合或沉淀反应，提出两种表面质子反应模型。对其中的特例，还考虑了表面离子交换反应。模拟程序的拟合结果显示两种模型对水解伊利石体系的滴定行为均可获得满意的描述。相的的表面固有酸度常数表明样品的酸碱性质之间存在一些共性。     

乙酸型顶极群落的内平衡与反馈调节机制研究

通过产酸脱硫反应器处理高浓度硫酸盐有机废水的连续流试验，从“动态”角度考察COD／SO4^2-比改变引起的pH值、氧化还原电位（ORP）、碱度（ALK）和末端产物（VFAs）等的变动及生态因子的叠加效应引发的优势种群变迁，分析了乙酸型顶极群落的稳定性及其发生定向性生态演替的规律，进而阐明了乙酸型顶极群落抵抗环境压力的内平衡与反馈调节机制，并指出乙酸型代谢和乙酸型顶极群落是产酸脱硫生态系统的典型特征。     

A/O和A2/O法除磷脱氮工艺影响因素及除磷动力学的研究

重点介绍A/O除磷工艺和A~2/O除磷脱氮工艺,以及影响除磷脱氮工艺因素和除磷动力学的研究。工艺研究采用了动态与静态实验方法,采用色质联机研究了有毒有机物的降解情况。试验结果表明,A/O、A~2/O工艺的BOD_5去除率近于二级污水处理厂,A~2/O法TP去除率近于三级污水处理厂,且去除难降解有毒有机物的效率高于传统的活性污泥法。动力学公式的修正使之更适于低碳源的情况。八种影响因素的研究为工艺的设计与运行提供了依据。     

重金属离子在腐殖酸表面的吸附——类颗粒表面吸附模型

本实验用伏安质子滴定法获得重金属离子(Cu~(2+)、Pb~(2+)、Cd~(2+))在腐殖酸表面吸附的实验数据,并基于这些数据提出重金属离子在腐殖酸表面的络合模型。模型中引入两个实验常数:反应系数α和竞争反应常数K_H。实验结果表明,这两个常数的实验值在一相当宽的起始溶液条件下基本稳定。基于这两个常数而获得的pH相关吸附等温线和实验数据相当符合。模型中采用了由电位滴定得到的腐殖酸表面羧基浓度作为最大表面基团浓度,并对其质子解离常数进行了表面电荷影响的修正。     

镉、汞、铅在体内对氨基酸掺入微粒体的特异性抑制作用

本实验采用DL-(~3H)-亮氨酸作为蛋白质合成的原料,从亚细胞水平观察镉、汞、铅在动物体内对肝脏各亚细胞组分蛋白合成的影响。实验结果表明,给雄性大鼠腹腔一次注入2.4mg/kg醋酸镉后72h和一次注给2.0mg/kg氯化汞或100mg/kg醋酸铅后24h,均可不同程度地抑制DL-(~3H)-亮氨酸掺入微粒体蛋白,而对其它组分包括细胞核、线粒体、去微粒体后上清液蛋白中DL-(~3H)-亮氨酸的掺入无明显影响。