赤潮研究的现状与展望

赤潮已成为一种严重的海洋灾害 ,引起沿海国家和地区的重视 ,并成为研究的热点。文章从赤潮发生的机理、赤潮管理与减灾等方面论述了赤潮研究的现状 ,并提出今后研究的重点。     

基于B-P神经网络的环境质量评价方法

提出可将环境质量评价的无论是定量指标还是定性参数转化成"二进制"的"1"或"0",进而将这种二进制数引入B-P网络.通过实例探讨,这种新的B-P网络既适用于定量指标的水质参数又适用于定性指标的水质参数.     

微波高压络合消解石墨炉原子吸收分光光度法测定环境空气中锑

用有机滤膜采集空气中颗粒物样品,用微波高压络合消解后制成样品溶液。用石墨炉原子吸收分光光度法可确定样品溶液中锑的浓度。该方法具有对有机滤膜和样品消解完全,省时,无损失,灵敏度高,准确度、精密度好等特点。     

工作场所空气中硫酸雾（SO3）的分析

采用碘量法测定工作场所空气中的三氧化硫及硫酸雾，三氧化硫及硫酸雾经中性水吸收后与碘化钾和碘酸钾反应，析出的碘与淀粉指示剂作用产生蓝色，进行比色测定。     

气相色谱-质谱法测定废酸油渣中的16种多环芳烃

建立了废酸油渣中16种多环芳烃超声萃取、Florisil萃取柱净化、气相色谱-质谱测定的方法。笔者对提取方式、提取剂类型和体积、提取时间和次数、净化方式等进行研究,采用无水硫酸钠分散,二氯甲烷作为提取剂超声40 min,提取液经纯水清洗、离心后取适量有机相经过3 g Florisil萃取柱净化,采用气相色谱-质谱选择离子模式(SIM),加入内标进行定量分析。结果表明:二氯甲烷提取效率比正己烷好,丙酮可能引起酸性样品中多环芳烃的降解,丙酮超声萃取时加入无水硫酸钠能在一定程度上防止目标物降解,但萃取效率不可控制,宜采用二氯甲烷作为萃取剂。分散提取能有效减少提取时间,超声清洗仪超声40 min提取效率为86.2%～104%。3g Florisil萃取柱净化比1 g Florisil萃取柱净化和GPC净化效果略好。方法检出限为0.4～1.3 mg/kg,6次空白加标的相对标准偏差为2.3%～15.3%,6个实际样品测定结果的相对标准偏差为1.2%～27.3%,基体加标回收率为51.3%～126%,连续校准稳定。该方法适用于废酸油渣样品中16种多环芳烃的检测,比直接溶解有效,比加速溶剂萃取、索氏提取、微波萃取和超声探头萃取简单、快捷,能有效减少设备污染和腐蚀,净化方法有效,测定结果准确可靠,是实现大批量样品检测的可行方法。     

酸雨研究的现状和发展趋势

介绍了酸雨的起因和目前国内外开展的 1 1个研究领域 ,叙述了各个领域的研究现状和发展趋势 ,指出要解决酸雨问题 ,应通过对酸性污染物的排放、迁移扩散、转化、沉降、对水及陆地生态系统的影响等基础研究和信息 ,制定出控制污染源的排放、节能及生态恢复对策     

透明度作为赤潮预警监测参数的初步研究

调查实验 数据显示，在一定条件下，透明度和浮游植物密度和种类之间有着一定的关系。浮游植物密度低时透明度高，浮游植物密度高时透明度低。认为可以尝试使用透明度作为赤潮预警监测或短期预报的参数。透明度值1.6m可以作为 赤潮预警的标准值进行试点。     

Kinetics of photoelectrocatalytic degradation of humic acid using B_2O_3·TiO_2/Ti photoelectrode

IntroductionEightypercentoforganicsubstancesinthesourcewaterisfromcrudehumicacidthatisacrudeorganiccompoundcreatedbyrottinganddecomposinginnaturalcycle ,thehighercontentofhumicacidis ,theworsequalityofthewateris,notonlycanitcausechrominance,offensiveodor,…     

A metal-OH group modification strategy to prepare highly-hydrophobic MIL-53-Al for efficient acetone capture under humid conditions

A series of highly-hydrophobic MIL-53-Al (MIL = Materials of Institut Lavoisier) frameworks synthesized via decoration of the Al-OH groups by alkyl phosphonic acid were developed as adsorbents for removing acetone from humid gas streams. The newly prepared materials were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), N₂ adsorption-desorption and thermogravimetric analysis (TGA). Their adsorption behaviors toward acetone vapor under dry and wet conditions were studied subsequently. Results showed that alkyl phosphonic acid was successfully grafted into MIL-53-Al skeleton through coordinating interaction with Al³⁺ generating [email protected]_x (x = 12, 14, 18). The [email protected]_x exhibited similar crystal structure and thermal stability to parent MIL-53-Al. Furthermore, the modified materials showed significantly enhanced hydrophobicity. The water vapor uptake of [email protected]₁₄ decreased by 72.55% at 75% relative humidity (RH). Dynamic adsorption experiments demonstrated that water vapor had almost no effect on the acetone adsorption performance of [email protected]₁₄. Under the condition of 90% RH, the acetone adsorption capacity of [email protected]₁₄ was 102.98% higher than that of MIL-53-Al. Notably, [email protected]₁₄ presented excellent adsorption reversibility and regeneration performance in 10 adsorption-desorption cycles. Taken together, the strategy of metal-OH group modification is an attractive way to improve the acetone adsorption performance over metal-organic frameworks (MOFs) under humid conditions. Besides, [email protected]₁₄ would be deemed as a promising candidate for capturing acetone in high moisture environment.     

Effect of acid precipitation on leaching of nutritionsand aluminium from forest soils

ＥｆｆｅｃｔｏｆａｃｉｄｐｒｅｃｉｐｉｔａｔｉｏｎｏｎｌｅａｃｈｉｎｇｏｆｎｕｔｒｉｔｉｏｎｓａｎｄａｌｕｍｉｎｉｕｍｆｒｏｍｆｏｒｅｓｔｓｏｉｌｓＤａｉＺｈａｏｈｕａ；ＬｉａｏＢｏｈａｎ；ＷａｎｇＺｈｉｈａｉＷａｎｇＸｉｎｇｊｕｎ；ＬｉｕＹｕｎｘｉ...