燃煤烟气脱硫副产物在酸性土上的农用价值与利用原理

燃煤烟气脱硫副产物作为废弃物对环境的潜在威胁,促使人们对其资源化利用研究的重视。文章针对红壤地区土壤普遍缺乏营养元素的问题,通过分析盆栽和田间试验结果,探讨燃煤烟气脱硫副产物在酸性土壤上的农用价值与利用原理。结果表明,燃煤烟气脱硫副产物富含作物所需的营养元素,而红壤地区土壤又普遍缺乏这些元素;它具有独特的形态特征和理化性能,在酸性土壤中可以产生协同效应,因而具极高的农用价值。在酸性土壤上适量施用,可以提高土壤养分含量,改善土壤理化性质,提高土壤供肥性能和持水能力,促进作物对养分的吸收,从而达到废弃物农业资源化利用的目的。     

Radon Exhalation Rate of Some Building Materials Used in Egypt

Indoor radon has been recognized as one of the health hazards for mankind. Common building materials used for construction of houses, which are considered as one of the major sources of this gas in indoor environment, have been studied for exhalation rate of radon. Non-nuclear industries, such as coal fired power plants or fertilizer production facilities, generate large amounts of waste gypsum as by-products. Compared to other building materials waste gypsum from fertilizer production facilities (phosphogypsum) shows increased rates of radon exhalation. In the present, investigation solid state alpha track detectors, CR-39 plastic detectors, were used to measure the indoor radon concentration and the radon exhalation rates from some building materials used in Egypt. The indoor radon concentration and the radon exhalation rate ranges were found to be 24–55 Bq m⁻³ and 11–223 mBq m⁻² h⁻¹, respectively. The effective dose equivalent range for the indoor was found 0.6–1.4 mSv y⁻¹. The equilibrium factor between radon and its daughters increased with the increase of relative humidity.     

A very simple yet accurate solution to the thermal explosion problem

A very simple solution to the thermal explosion problem for one-dimensional solids is presented. The solution produces analytical expressions for the criticality condition. Two different solutions are used. One solution gives higher answers than those known from exact solutions and the second solution gives lower answers. This allows bracketing the expected answer with a determined tolerance. The results obtained compare quite favorably with those obtained from known exact numerical solutions. This allows the utilization of the present method for many a practical problem with an acceptable tolerances.     

Long-term engineering properties of recycled plastic lumber used in pier construction

Plastic lumber manufactured using post consumer waste plastic has been proposed as an acceptable material for use in the construction of docks, piers and bulkheads and is touted to outlast conventional wood products due to its strength, durability and resistance to rot. This study examines the long-term engineering properties of plastic lumber manufactured using post consumer waste plastic (TRIMAX, Ronkonkoma, NY). Plastic lumber profiles were used in the decking of a pier built in West Meadow Creek, Old Field, NY during December 1995. Samples of plastic lumber were removed from the deck of the pier periodically over a two-year period and returned to the laboratory for testing. Results of engineering tests showed the in-plane compression modulus (260±30 MPa), dimensional stability and the Shore D surface hardness (60±2) of plastic lumber removed from the pier remained similar to or greater than their pre-placement values. In contrast, significant changes in the modulus of elasticity of plastic lumber were measured with prolonged weathering. The modulus of elasticity of plastic lumber initially decreased from 1370 Pa to 750 Pa following 12 months weathering, a decrease equal to 45% of its pre-placement value and then increased during the second year to close to its initial value. The high variability in the modulus of elasticity should restrict the use of plastic lumber profiles to non-load bearing structural applications.     

汽车内饰材料的人工老化试验

讨论了光的能量和辐射强度、环境温度和湿度对汽车内饰材料老化的作用,介绍了国外广泛使用于汽车内饰材料老化的试验方法和试验设备,认为以氙灯和金属卤素灯为光源的试验设备配置适当的滤波器可进行模拟性最好的人工老化试验,建议加强汽车用材料的老化试验技术和评价方法的研究,尽快制定我国的汽车内饰材料老化试验方法的标准.     

锅炉型煤质量的影响因素分析

分析了配煤组分、成型工艺条件、型料粒度等方面对工业型煤质量的影响，指标合理确定惰性组分含量、成型水分和型料粒度组成是型煤生产的关键，并对实际生产提供帮助。     

高流速海水中舰艇常用材料腐蚀实验研究

介绍了舰艇常用材料在海水环境动态高流速条件下自然电位、自然腐蚀率、电偶腐蚀等多方面的腐蚀实验方法及实验结果,得出了舰艇常用系列材料在动态海水中的腐蚀基本数据以及变化规律,为在舰船设计中材料的选择及腐蚀防护方案的制定提供参考。     

块体纳米材料的制备及其应用

综述了块体纳米材料的制备技术及其发展 ,指出了常用方法存在的问题 ,并在此基础上论述了块体纳米材料的性能、应用及其发展趋势     

高速冲击下多胞材料细观结构中波传播规律

目的 获取安全防护结构中细观多胞材料在高速冲击下的波传播规律.方法 采用基于3D-Voronoi细观多胞结构数值仿真和基于最小二乘法的局部应变梯度法,研究细观多胞结构在高速冲击下的冲击波波阵面传播规律.通过细观多胞结构数值仿真提取的位移场数据,结合局部应变梯度法得到界面清晰的冲击波波阵面.结果 冲击端和支撑端分别诱发右行和左行冲击波波阵面.冲击波波阵面传播过程分为3个阶段,即冲击端诱发右行冲击波阶段、支撑端诱发左行冲击波且未压缩区刚性向右运动阶段和右行冲击波压缩区域与未压缩区域一体刚性向右运动阶段.通过冲击波波速的演化规律研究,分别获取了右行和左行冲击波波阵面的拉氏位置和拉氏波速,通过严格理论推导解释了右行冲击波波阵面具有恒定减加速度的结论.最后对冲击波波阵面划分阶段的合理性进行了验证.结论 基于3D-Voronoi细观多胞结构数值仿真和基于最小二乘法的局部应变梯度法可以获取界面清晰的冲击波波阵面,细观多胞结构在高速冲击下的冲击波波阵面传播规律可为安全防护结构的设计和研究提供参考依据.     

染色残液电化学处理碳素阴极材料性能比较

为实现染色残液的高效处理及废水回用,鉴于染色残液良好的导电性,选用电化学处理技术,以模拟活性红X-3B染色残液为研究对象,在钌铱形稳电极为阳极和合适的电解条件下,比较石墨板、石墨毡、炭毡、ACF（活性炭纤维毡）、碳纤维电极〔CFF（碳纤维布）、CFB（碳纤维刷）〕等碳素阴极材料的电化学处理效能.结果表明:碳素阴极材料可实现染色残液的完全脱色,活性红X-3B的降解过程符合一级反应动力学特征,其中CFF为阴极时COD_Cr去除率达到86.37%,一级动力学反应常数为0.010 3 min-1,是石墨毡（0.007 3 min-1）的1.4倍.相比于石墨板电极,CFB显示出优异的二电子氧还原和产H₂O₂能力,单位面积产H₂O₂的浓度为10.40 μmol/L,是石墨板（1.08 μmol/L）的9.7倍,产生的H₂O₂导致活性红X-3B的降解,30 min内实现完全脱色.循环伏安曲线表明,碳纤维电极（包括CFF和CFB）的析氧电位明显高于其他电极,可有效抑制析氧副反应,提高有机污染物降解过程中的电催化效率,有利于降低能耗.研究显示,碳纤维可作为阴极材料应用于电化学处理染色残液,具有良好的稳定性.