环状扩散管-分级采样器的建立和细粒子酸性的测定

建立了国内第一台扩散管－分级采样器，用来研究大气气胶溶胶的组成和细粒子的酸性，实验证明该采样系统能够有效地避免大气中的碱性物质对颗粒物采样的干扰。在北京，湖南等地进行了现场实验，测定了气溶胶的酸性。     

Field measurements of dissociation of ammonium nitrate at a Beijing site

ＦｉｅｌｄｍｅａｓｕｒｅｍｅｎｔｓｏｆｄｉｓｏｃｉａｔｉｏｎｏｆａｍｍｏｎｉｕｍｎｉｔｒａｔｅａｔａＢｅｉｊｉｎｇｓｉｔｅＳｈｅｎＪｉ，ＺｈａｏＱｉａｎｘｕｅＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏＥｎｖｉｒｏｎｍｅｎｔａｌＳｃｉｅｎｃｅｓ，Ｃ...     

海洋气溶胶对沿海地区降水组成的贡献

以青岛地区为对象，对沿海地区大气气溶海洋因子对降水组成的贡献，进行了研究分析。结果表明，１）夏季受海洋影响要比冬季明显得多；（２）降水中主要的碱性物质，不论是夏季或冬季，９９％来自大陆气溶胶，海洋的影响可忽略；（３）海洋影响的程度和离海边的距离有关，离海愈远，受海洋影响就愈小，离海愈近，受其影响就愈大。     

青岛地区总悬浮颗粒物中金属元素沉降通量

于2001 05～2002 04在青岛近海三个采样点采集了100多个大气气溶胶样品,用ICP测定了元素Al、Fe、Mn、Cu、Pb、Zn的浓度,讨论了这几种元素入海通量的季节变化和年平均值。结果表明,三类地壳元素春季在青岛近岸海域的沉降通量占全年的50%以上,而夏季不到10%;Cu秋季≈冬季(各占30%左右)>春季>夏季;Pb、Zn四季沉降通量的变化规律为冬季>春季>秋季>夏季。     

Adsorption and correlation with their thermodynamic properties of triazine herbicides on soils

IntroductionAdsorptionofherbicidesonsoilfromwaterisanimportantfactoraffectingtheirfate,biologicalactivity,andpersistenceinsoil watersystem .Itisoftenaffectedbyseveralpropertiesofsoil.Betterunderstandingofadsorptionanditsaffectingfactorswillmakeitpossibletoadjusttheherbicidedosageaccordingtosoilproperties,thusreducingtheenvironmentalpollutionofherbicidesintheenvironment.Fig .1　StructuresofthreetriazineherbicidesAmongthepost emergentherbicides,triazineherbicidesaremostcommonlyusedworldwideonco…     

抚顺市空气可吸入颗粒物特征的研究

于2002年1～7月份在抚顺市区四个点位采集了环境空气中的可吸入颗粒物样品，经分析后获得了可吸入颗粒物组分的时间分布和空间分布特征，即采暖期PM10样品中有机碳（OC）、元素碳（EC）的绝对含量和相对含量均高于非采暖期，工业区PM10样品中的Fe、Zn、Pb的绝对含量和相对含量均明显高于其它点位，反映了其工业区的特点。     

Starch, Poly(lactic acid), and Poly(vinyl alcohol) Blends

Research on biodegradable materials has been stimulated due to concern regarding the persistence of plastic wastes. Blending starch with poly(lactic acid) (PLA) is one of the most promising efforts because starch is an abundant and cheap biopolymer and PLA is biodegradable with good mechanical properties. Poly(vinyl alcohol) (PVOH) contains unhydrolytic residual groups of poly(vinyl acetate) and also has good compatibility with starch. It was added to a starch and PLA blend (50:50, w/w) to enhance compatibility and improve mechanical properties. PVOH (M_W 6,000) at 10%, 20%, 30%, 40%, 50% (by weight) based on the total weight of starch and PLA, and 30% PVOH at various molecular weights (M_W 6,000, 25,000, 78,000, and 125,000 dalton) were added to starch/PLA blends. PVOH interacted with starch. At proportions greater than 30%, PVOH form a continuous phase with starch. Tensile strength of the starch/PLA blends increased as PVOH concentration increased up to 40% and decreased as PVOH molecular weight increased. The increasing molecular weight of PVOH slightly affected water absorption, but increasing PVOH concentration to 40% or 50% increased water absorption. Effects of moisture content on the starch/PLA/PVOH blend also were explored. The blend containing gelatinized starch had higher tensile strength. However, gelatinized starch also resulted in increased water absorption.     

双室火灾烟气特性的实验研究

本文在１／２缩尺建筑模型中，取双室－走廊结构，以标准木垛为火源，对建筑火灾的初始阶段进行了实验模拟。着重研究了火灾初期的烟气特性及其变化，包括烟气温度及烟气中ＣＯ＿２气体和炭颗粒浓度。本文目的在于在探索和发展中等尺寸火灾实验模拟手段和方法的同时，定性地确定火源功率对烟气特性的影响，并积累一定的实验数据，为建筑火灾的分析和模化提供实验基础和依据。     

80m烟囟排放放射性气溶胶连续自动监测

本文介绍采用德国进口的ＬＢ９１００Ｄ监测系统对８０ｍ烟囟排放的α放射性气溶胶浓度进行连续、自动监测。并与国产ＦＪ－３６７，ＦＨ－４６３Ａ装置进行了对比则量，两套装置的测量结果符合得较好。     

Mechanical Properties with the Functional Group of Additives for Starch/PVA Blend Film

This paper deals with the mechanical properties and degree of swelling (DS) of starch/PVA blend film with the functional groups i.e., hydroxyl and carboxyl group, of additives. Starch/PVA blend films were prepared by using the mixing process. Glycerol (GL) with 3 hydroxyl group, sorbitol (SO) with 6 hydroxyl group, succinic acid (SA) with 2 carboxyl group, malic acid (MA) with 1 hydroxyl and 2 carboxyl group, tartaric acid (TA) with 2 hydroxyl and 2 carboxyl group and citric acid (CA) with 1 hydroxyl and 3 carboxyl group were used as additives. The results of measured tensile strength (TS) and elongation (%E) verified that both hydroxyl and carboxyl group as a functional groups increased the flexibility and strength of the film. Values of DS for GL-added and SA-added films were low. However, DS values of the films added MA, TA or CA with both hydroxyl and carboxyl group were comparatively high. When the film was dried at low temperature, the properties of the films were evidently improved. The reason is probably because the hydrogen bonding was activated at low temperature.