Heterogeneous Sulfate Formation on Dust Surface and Its Dependence on Mineralogy: Balloon-Borne Observations from Balloon-Borne Measurements in The Surface Atmosphere of Beijing, China

This study focuses on providing a direct insight into the process by which sulfate is formed on mineral dust surface in the actual atmosphere. Six sets of aerosol measurements were conducted in the outskirts of Beijing, China, in 2002–2003 using a tethered balloon. The mineralogy of individual dust particles, as well as its influence on the S (sulfur) loadings was investigated by SEM-EDX analysis of the directly collected particles. The mixed layer in the urban atmosphere was found to be quite low (500–600m), often appearing as a particle dense stagnant layer above the surface. It is suggested that mineral dust is a common and important fraction of the coarse particles in Beijing (35–68%), and that it is relatively enriched with Calcite (>28%). An exceptional amount of S was detected in the mineral particles, which can be explained neither by their original composition, nor by coagulation processes between the submicron sulfates and the dust. Heterogeneous uptake of gaseous SO₂, and its subsequent oxidation on dust was suggested as the main pathway that has actually taken place in the ambient environment. The mineral class found with the largest number of particles containing S was Calcite, followed by Dolomite, Clay, Amphibole etc., Feldspar, and Quartz. Among them, Calcite and Dolomite showed distinctly higher efficiency in collecting sulfate than the other types. A positive correlation was found with the number of S containing particles and the relative humidity. Calcite in particular, since almost all of its particles was found to contain S above 60% r.h. On the other hand, the active uptake of SO₂ by the carbonates was not suggested in the free troposphere downwind, and all the mineral classes exhibited similar S content. Relative humidity in the free troposphere was suggested as the key factor controlling the SO₂ uptake among the mineral types. In terms of sulfate loadings, the relationship was not linear, but rather increased exponentially as a function of relative humidity. The humidity-dependent uptake capacity of mineral types altogether showed an intermediate value of 0.07 gSO₄ ²⁻ g⁻¹ mineral at 30% r.h. and 0.40 gSO₄ ²⁻ g⁻¹ mineral at 80%, which is fairly consistent with laboratory experiments.     

指数型刚度非线性隔震系统的隔震性能分析

目前应用的隔震系统往往处于非线性工作状态,隔震设计仍基本停留在线性隔震理论的基础上,使隔震系统的设计存在诸多缺陷,因此加强对非线性隔震理论的研究十分重要。用指数型刚度表示的隔震系统在非线性隔震系统中有较强的代表性,只要改变指数参数的正负号就可以简单地反映出隔震材料或隔震元件的硬特性或软特性。通过对隔震系统建立的数学模型在核爆近区和远区的地冲击加速度作用下的隔震性能进行数值计算分析,证明隔震系统刚度特性对隔震性能有很大影响,该分析方法对隔震材料的选择和系统的设计有重要的参考价值。     

Bioabsorbable soy protein plastic composites: Effect of polyphosphate fillers on water absorption and mechanical properties

The use of synthetic and natural bioabsorbable plastics has been severely limited due to their low stiffness and strength properties as well as their strong tendency to absorb moisture. This research focused on the development of bioabsorbable polyphosphate filler/soy protein plastic composites with enhanced stiffness, strength, and water resistance. Bioabsorbable polyphosphate fillers, biodegradable soy protein isolate, plasticizer, and adhesion promoter were homogenized and compression-molded. Physical, mechanical, and water absorption testing was performed on the molded specimens. Results showed improvements in stiffness, strength, and water resistance with increasing polyphosphate filler content up to 20% by weight. Application of a coupling agent produced further mechanical property enhancements and a dramatic improvement in water resistance, interpreted by an interfacial chemical bonding model. Examination of the fracture surfaces of the materials revealed that the addition of the polyphosphate fillers changed the failure mode from brittle to pseudo-ductile. These results suggest that these materials are suitable for many load-bearing applications in both humid and dry environments where current soy protein plastics are not usable.     

Biodegradable corn starch loose- fill. I. The effect of the extrusion temperature on the physical properties of loose-fill

Extrusion with an intermeshing corotating twin-screw extruder with a limited amount of water caused structural changes in corn starch. The structural changes resulted in a transformation-from a semicrystalline to an amorphous state and the development of orientation of molecular chains in the amorphous region during extrusion. These structural changes, in turn, caused an increase in theT _g, tensile strength, and resilience of the extruded corn starch. Our experimental results showed that the tensile properties and resilience of the expanded corn starch extruded at 240‡C were the best: tensile strength, 1.7 kPa; tensile modulus, 40.4 kPa; and resilience, 57.2%. Extrusion produced an expanded corn starch suitable for protective loose-fill.     

Environmental effects of soil property changes with off-road vehicle use

The effects of off-road vehicles (ORVs) on the physical and chemical properties of 6 soil series were measured at Hollister Hills State Vehicular Recreation Area in central California. Accelerated soil erosion and the alteration of surface strength, bulk density, soil moisture, temperature, and soil nutrients were quantified to gain an insight into the difficulty of revegetating altered, or modified, areas.Erosion is severe at Hollister Hills, particularly in coarse grained soils on steep slopes. Erosion displaced 0.5 and 3.0 metric tons per square meter on 2 trails on gravelly sandy loam, and 0.3 metric tons/m² from a trail on sandy loam. The surface strength and bulk density increased while the soil moisture decreased in gravelly sandy loam, coarse sandy loam, sandy loam, and clay. Clay loam had an increased surface strength with variably increased bulk density and no decrease in soil moisture. Diurnal temperature fluctuations increased and organic material and soil nutrients decreased in soil modified by vehicles.These property changes increase the erosion potential of the soil, impede germination of seedlings, and slow natural revegetation. Management methods in ORV-use areas should include planning trails by prior application of the universal soil loss equation and soil surveys, trail closure before complete loss of the soil mantle, and revegetation of closed areas.     

Novel Biobased Polyurethanes Synthesized from Soybean Phosphate Ester Polyols: Thermomechanical Properties Evaluations

Biobased polyurethanes from soybean oil–derived polyols and polymeric diphenylmethane diisocyanate (pMDI) are prepared and their thermomechanical properties are studied and evaluated. The cross-linked biobased polyurethanes being prepared from soy phosphate ester polyols with hydroxyl contents ranging from 122 to 145 mg KOH/g and pMDI within 5 min of reaction time at 150°C in absence of any catalyst show cross-linking densities ranging from 1.8 × 10³ to 3.0 × 10³ M/m³, whereas glass transition temperatures vary from approximately 69 to 82°C. The loss factor (tan ) curves show single peaks for all these biobased polyurethanes, thus indicating a single-phase system. The storage moduli (G) at 30°C range from 4 × 10⁸ to 1.3 × 10⁹ Pa. Upon postcure at 150°C, the thermomechanical properties can be optimized. Cross-link densities are improved significantly for hydroxyl content of 139 and 145 mg KOH/g at curing time of 24 h. Similarly, glass transition temperature (T_g) and storage moduli around and after T_g are increased. Meanwhile, tan intensities decrease as result of restricted chain mobility. Longer exposure time (24 h) induces thermal degradation, as evidenced by thermogravimetric analysis (TGA). The dynamic mechanical (DMA) analysis shows that postcure at 100°C for times exceeding 24 h also leads to improved properties. However, cross-linking densities are lower compared to postcure carried out at 150°C.     

Formation and Transport of Atmospheric Aerosol over Athens, Greece

The effects of meteorology on ambient aerosol concentrations and aerosol transport, within the Greater Athens Area during the summer period, was investigated. Measurements of size fractionated anions and cations were made at two sites (inland at Ag. Stefanos and on the coast at Pireas) within the Greater Athens Area. The wind regime exhibited a distinctinfluence such that the sea-breeze circulation strongly enhanced the formation of secondary aerosols. For sulphate the difference in concentration between the two sites was,on average, 8 times greater on sea-breeze days compared with Etesian days (warm days with NE winds). During `normal' days,any differences in concentrations were possibly due to localemissions. Elevated concentrations in the fine mode were detectedat both sites during the sea-breeze days. The sea-breezecirculation enhances the development of secondary aerosolswhich was clearly shown at the inland site. Nitrous acid,hydrochloric acid and particulate nitrate, sulphate andammonium increase during sea-breeze days. Elevated levelsof nitrate, 4 m diameter, were particularly observedon the days with a strong sea-breeze circulation. Sulphatewas well correlated with both sulphur dioxide and ammoniumsuggesting the production of NH₄HSO₄/(NH₄)₂SO₄ aerosols, formedthrough the neutralisation of NH₃ with sulphuric acids.Ammonium sulphate was found to be the major ammoniumcomponent in Athens.     

充装条件对水基热气溶胶灭火剂燃速影响规律的研究

水基热气溶胶灭火剂是以替代哈龙为目的而研制的新一代灭火制；主要论述了充装量，充装密度，燃烧器结构等充装条件对水基热气溶胶灭火剂燃烧速度的影响规律，并分析了充装量，充装密度，燃烧器结构影响燃烧速度的原因。     

电热原子吸收法测定大气中微量元素镉

用HNO_3—HClO_4硝解聚氯乙烯膜,用石墨炉原子吸收法直接测定大气颗粒物中的镉,方法准确度使用标准物质,在选定的条件下,相对误差0.011％,变异系数为10.83％,回收率在90.2～101.6％,方法操作简便测定速度快。     

ESTIMATION OF OPTICAL PROPERTIES OF WATER FROM SECCHI DISK DEPTHS1

ABSTRACT: Optical information on a water body is often required when only Secchi disk depths are available. Many limnologists and water managers have attempted to estimate diffuse light attenuation in water from Secchi depth data assuming a simple inverse relationship. However, we show theoretically that the product of Secchi depth and the diffuse attenuation coefficient is markedly dependent on the reflectance coefficient (“brightness”) of water. Data from 28 New Zealand lakes of diverse optical character demonstrated this dependence over a wide range of reflectance (1.1 to 35.9 percent). Uncritical estimation of attenuation coefficients for diffuse light from Secchi depths, using the currently available simple inverse expressions, is discouraged because of the possibility of bias.