三江平原水田氮的侧渗输出研究

为探讨三江平原水田面源污染物氮的输出机制,通过不同尺度田间原位实验,研究了氮在水田-田埂-渠系系统侧渗输出过程中氮含量、田埂截留率及侧渗速率的变化规律.并对水田氮流失负荷进行了量化.结果表明,近沟渠田埂宽度对侧渗速率和截留氮素的能力影响明显.随田埂宽度的增加,侧渗速率降低,而田埂对氮素的截留能力增强,其中,田埂对氨氮(...     

米槠天然林和人工林土壤呼吸的比较研究

采用Li-8100开路式土壤碳通量系统,对福建省三明市格氏栲自然保护区米槠天然林和人工林土壤呼吸进行1 a的定位观测,分析了土壤水热因子及凋落物对土壤呼吸的影响.结果表明,米槠天然林和人工林土壤呼吸速率月变化均呈单峰型曲线,峰值分别出现在6月上旬[7.03μmol·(m2·s)-1]和7月下旬[5.12μmol·(m2·s)-1];天然林和人工林土壤呼吸速率的年均值分别为3.74μmol·(m2·s)-1和3.05μmol·(m2·s)-1,两者之间有显著差异(P<0.05);土壤温度是影响土壤呼吸的主要因素,分别可以解释天然林和人工林土壤呼吸速率月动态变化的80.1%和81.0%;天然林土壤含水量与土壤呼吸速率呈显著正相关,但人工林两者不具有相关关系;天然林和人工林土壤呼吸速率与当月凋落物量和前一个月凋落物量呈极显著的正相关关系(P<0.01);指数方程计算的天然林和人工林土壤呼吸的Q10值分别为1.86和2.01,天然林和人工林土壤呼吸年通量值分别为14.34 t·(hm2·a)-1和11.18 t·(hm2·a)-1,天然林转换为人工林后,土壤呼吸年通量下降了22.03%.     

Numerical model of flow and pollutant transportation in non-orthogonal curvilinear coordinates

The planar 2D k-ε double equations‘ turbulence model was adopted and transformed into non-orthogonal curvilinear coordinates. The concentration convection-diffusion was introduced to planar 2D SIMPLEC algorithm of flow in non-orthogonal curvilinear coordinates. The numerical model of pollutant transportation in non-orthogonal curvilinear coordinates was constructed. The model was applied to simulate the flow and pollutant concentration fields. In the testing concentration field, two optimal operations of contamination discharging both along bank and in the centerline at the first bend of the meandering channel were adopted. Comparison with available data showed the model developed was successful, was valuable to engineering application.     

长江三角洲地区人为源氨排放清单及分布特征

根据各类氨排放源的活动水平和排放因子,估算了2004年长江三角洲地区16个城市的氨排放量.结果表明,2004年长三角地区氨排放量为460.68kt,其中,氮肥使用和畜牧源是两个最大排放源,氨排放量分别为227.33kt和203.28kt,分别占长江三角洲地区氨排放总量的49.3%和44.1%,氨排放在长三角地区各城市间有较大差异,排放量超过40kt·a-1的城市为南通市、上海市、嘉兴市和泰州市,这4个城市的氨排放总量约占长三角地区氨排放量的42.5%.长江三角洲地区氨平均排放强度为4.20t·km-2·a-1,排放强度超过6t·km-2·a-1的城市为嘉兴市、南通市、泰州市和上海市,其中,嘉兴市的排放强度最大,为10.83 t·km-2·a-1.     

Ni2+改性的Cu-ZSM-5催化分解NO的性能

研究 Ni²⁺改性的 Cu^- ZSM-5催化剂在无氧和有氧气氛下的 NO分解反应性能 ,考察 Ni²⁺的加入量及加入方式对 Cu-ZSM-5催化剂 NO分解活性的影响 .结果表明 ,先交换适量 Ni²⁺再交换 Cu²⁺的 Ni-Cu-ZSM-5催化剂较单组分 Cu-ZSM-5催化剂有较高的高温 (500℃～600℃) NO分解活性 .在含 5.5% O₂ 的反应气氛中 ,Ni-Cu-ZSM-5在 500℃下的 NO分解率较之 Cu-ZSM-5高出约 20% ,Ni²⁺的引入显著提高了催化剂的抗氧活性 .就 Ni²⁺对 Cu-ZSM-5催化剂的可能改性机制进行了讨论 .     

不同基质浓度下SBR进水方式对厌氧氨氧化的影响

采用厌氧SBR反应器,分别以配水培养和以实际晚期垃圾渗滤液培养的厌氧氨氧化菌为研究对象,考察了不同基质浓度下,SBR改进式连续进水方式与一次性进水方式对厌氧氨氧化工艺运行性能的影响.结果表明,当处理人工配水时,在中低进水浓度下(NO2--N￡400mg/L),与改进式连续进水方式相比,宜采用一次性进水方式运行;在高进水浓度下(NO2--N3400mg/L)改进式连续进水方式比一次性进水方式优势明显,特别是在5h改进式连续进水方式下,平均比污泥脱氮速率增加至39.11mgN/(gVSS·h),相比一次进水方式效率提高40%.当处理进水NO2--N浓度为(300±20)mg/L的实际晚期垃圾渗滤液时, 5h改进式连续进水的SBR比污泥脱氮速率最高.由于晚期渗滤液较配水成分复杂,使得厌氧氨氧化菌面临有机物和有害物质的影响,其厌氧氨氧化的反应速率低于同等基质浓度配水条件下的厌氧氨氧化反应速率.     

上海市郊区大气细颗粒和超细颗粒物中元素粒径分布研究

用同步辐射X荧光光谱分析了上海市郊区大气细颗粒和超细颗粒物（0.028 7～2.40 μm）中元素粒径分布、质量中值粒径、元素相关性和不同粒径颗粒物中的富集因子.Ca、Ti主要分布于粒径>2 μm的颗粒物中,它们之间的相关系数达0.933,富集因子在0.1～3.2之间,且与粒径无明显关联,主要来自土壤扬尘等自然来源.V、Cr、Mn、Ni、Zn、Cu、Pb、Cl、S等元素主要分布在0.1～1.0 μm颗粒物中,质量中值粒径在0.56～0.94 μm之间.V、Cr、Ni、Cu、Zn、Pb显著富集,且富集程度随粒径减小而增大.其中Pb在超细颗粒物（<0.1 μm）中的富集因子达2 023.7～2 244.2,远大于在细颗粒和 PM_2.5中的富集程度.这些元素主要来自燃油、燃煤、冶金和机动车尾气等人为污染.Fe在>0.2 μm颗粒物中分布较均匀,质量中值粒径1.3 μm.除了局部污染源,远距离传输对该地区大气颗粒物污染有不可忽略的影响.     

环境试验箱围护结构传热研究

通过对环境试验箱围护结构由高温降至低温时的非稳态传热过程建立物理模型和数学模型,并使用有限容积法及TDMA进行围护结构传热数值计算来分析3种不同降温工况下的围护结构的传热特性,提出了围护结构质量系数概念,用以简化计算其降温时的耗冷量.     

Effects of organic matter on Leymus chinensis germination,growth, and urease activity and available nitrogen in coastal saline soil

ABSTRACT

The present study was carried out to investigate the effect of three organic matters (stalk powder, microbial fertilizer, and manure) on Leymus chinensis germination, growth, and urease activity and available nitrogen (N) in coastal saline soil. The study was conducted in a completely randomized design with eight treatments: J₀V₀Y₀, J₁V₀Y₀, J₀V₁Y₀, J₀V₀Y₁, J₁V₁Y₀, J₁V₀Y₁, J₀V₁Y₁, J₁V₁Y₁. The notations were based on the quantities of each agent added to 1 kg of coastal saline soil: J₀ – no straw powder, J₁ – 0.2 kg straw powder, Y₀ – no manure, Y₁ – 0.3 kg manure, V₀ – no microbial fertilizer, V₁ – 0.2 L microbial fertilizer, each in quantic repeat. L. chinensis was sown as 50 seeds per pot. Results indicated that addition of organic agents exerted a significantly enhanced germination, increase in fresh weight and elevated soil urease activity. Soil available N levels were significantly positively correlated with soil urease activity and fresh weight, but not with germination rate. It is noteworthy that the halophyte L. chinensis showed improved characteristics when grown in coastal saline soil with addition of organic amendments.     

Development of heat transfer and evaporation model of LNG covered by Hi-Ex foam

Natural gas is a kind of clean, efficient green energy source, which is used widely. Liquefied natural gas (LNG) is produced by cooling natural gas to −161 °C, at which it becomes the liquid. Once LNG was released, fire or explosion would happen when ignition source existed nearby. The high expansion foam (Hi-Ex foam) is believed to quickly blanket on the top of LNG spillage pool and warm the LNG vapor to lower the vapor cloud density at the ground level and raising vapor buoyancy. To identify the physical structure after it contacted with LN₂ and to develop heat transfer model, the small-scale field test with liquid nitrogen (LN₂) was designed. In experiment, three layers including frozen ice layer, frozen Hi-Ex layer and soft layer of Hi-Ex foam were observed at the steady state. By characterizing physical structure of the foam, formulas for calculating the surface of single foam bubble and counting foam film thickness were deduced. The micro heat transfer and evaporation model between cryogenic liquid and Hi-Ex foam was established. Indicating the physical structure of the frozen ice layer, there were a certain number of icicles below it. The heat transfer and evaporation mathematical model between the frozen ice layer and LNG was derived. Combining models above with the heat transfer between LNG, ground and cofferdam, the heat transfer and evaporation mathematical model of LNG covered by Hi-Ex foam was developed eventually. Finally, LN₂ evaporation rate calculated by this model was compared with the measured evaporation rate. The calculated results are 1.2–2.1 times of experimental results, which were acceptable in engineering and proved the model was reliable.