悬浮液进样原子荧光光谱法测定海洋沉积物样品中的痕量汞

研究了一种使用悬浮液进样原子荧光光谱法测定海洋沉积初中痕量汞的快速简便的方法。控制悬浮液的颗粒粒径在200目(d≤0.076mm)，用磁力搅拌器搅拌以保证悬浮液分散均匀稳定，以水溶液标准作标准曲线，该法方法的检出限为0．001μg/L，加标回收率为90．5％-103．4％，RSD为4．39％。将此法用于标准物质GBw07314、GBw08301、GSBZ50013—88、GSB50014—88和实验室外控样的分析，得到了满意的结果，证明该方法准确可靠。     

冷原子吸收光度法测定工业用浓盐酸中痕量汞

通过进样管道的设计,可能存在的干扰,以及工作参数的详细研究,建立了用冷原子吸收光度法直接测定工业用浓盐酸中痕量汞的分析方法。实际样品测定结果表明,该方法可靠,准确可行。     

Stability analysis of alkaline nitrobenzene-containing wastewater by a catalyzed Fe-Cu treatment process

Iron and copper bimetallic system (catalyzed Fe-Cu process) is a promising technology for alkaline nitrobenzene-containing wastewater treatment. However, little is currently known about the changes of treatment efficiency with time going. This research investigated the long-term performance of the catalyzed Fe-Cu process to reduce nitrobenzene (NB) in alkaline wastewater. In addition, the changes of the metal surfaces morphologies and matters before and after the reaction were analyzed by scanning electron microscopy (SEM) in conjunction with energy-dispersion spectroscopy (EDS) and X-ray diffraction spectroscopy (XRD). The results showed that the surface properties of copper almost remained unchanged after weeks of operation, which spelled its strong chemical stability and resistance to poisoning. Moreover, the results indicated that there were two reasons for the treatment efficiency decreasing with time. One was the gradual iron element consumption due to corrosion. The other was iron reactivity weakened due to the precipitates accumulation on the surfaces that were mainly Fe₃O₄ and FeCO. __________ Translated from Environmental Pollution & Control, 2006, 28(10): 783–785 [译自: 环境污染与防治]     

事物安全演化过程的基本理论研究

安全状态的演化过程是事物发展变化过程的重要组成部分.事物的安全演化过程符合从量变到质变的原理,即服从"安全流变-突变"规律.基于事物"安全流变-突变"规律,建立理论模型,并分析和描述事物的安全演化过程.事物"安全流变-突变"规律的研究为揭示事物的安全本质规律奠定了基础.     

极性基湿润剂与矿岩类粉尘颗粒的作用机理

根据矿岩类粉尘微颗粒的表面性质和极性基湿润剂的特性，应用分子热力学和表面物理化学理论探讨了湿润型抑尘剂与矿岩类粉尘之间的相互作用机理。矿岩类粉尘吸附水的本质是由于它们之间的相互吸引作用，是分子之间的短程相互作用力和长程作用力共同作用的结果。当矿岩类粉尘与水相碰撞时，只有当吸引力大于排斥力时，水分子才能牯附于矿岩类粉尘，表面张力和体系自由能足够小时，水才能湿润矿岩类粉尘。分析了湿润剂对水和矿岩类粉尘的表面改性的原理，它增加水和矿岩类粉尘之间的相互作用力，减小了界面表面张力和体系自由能，使矿岩粉尘被水湿润能自由地进行。     

延边地区公路沿线边坡失稳试验分析

延边地区公路沿线分布着大量软岩，其岩性具有强膨胀性，致使这一地区公路边坡出现了多处滑坡现象。为了合理地处理这一工程地质问题，需要认真研究该种软岩的膨胀特性。选取滑坡体软岩为研究对象，定量分析了其自由膨胀率、无荷膨胀率和有荷膨胀率，并具体测定了其膨胀力，探讨了其膨胀率和膨胀力的变化规律，揭示了研究区软岩的膨胀特性，为公路建设中软岩边坡加固参数的选取提供了科学的依据。     

2000~2014年武汉市城市扩展时空特征分析

基于不同时相的高分辨率遥感影像，采用面向对象的解译方法提取了武汉市2000、2005、2010和2014年的土地覆被信息，从城市扩展强度指数，城市中心坐标迁移和分形维数等方面分析了武汉市2000～2014年城市扩展时空特征。结果表明：2000～2014年间，武汉市城市扩展强度指数为1.41，各主城区城市扩展强度不一，洪山区建设用地的增加对主城区城市扩展的贡献最大；在扩展过程中，武汉市城市分形维数增加，城市空间形态变复杂；其扩展呈现核心-放射扩展模式，并逐渐转向圈层式；自然条件、经济、人口、交通、政策和城市规划是武汉市城市扩展的主要驱动力，但随着交通的发展，自然条件和经济对武汉市城市扩展的驱动作用正逐渐减弱。     

Using multivariate regression modeling for sampling and predicting chemical characteristics of mixed waste in old landfills

Municipal solid waste landfills pose a threat on environment and human health, especially old landfills which lack facilities for collection and treatment of landfill gas and leachate. Consequently, missing information about emission flows prevent site-specific environmental risk assessments. To overcome this gap, the combination of waste sampling and analysis with statistical modeling is one option for estimating present and future emission potentials. Optimizing the tradeoff between investigation costs and reliable results requires knowledge about both: the number of samples to be taken and variables to be analyzed.This article aims to identify the optimized number of waste samples and variables in order to predict a larger set of variables. Therefore, we introduce a multivariate linear regression model and tested the applicability by usage of two case studies. Landfill A was used to set up and calibrate the model based on 50 waste samples and twelve variables. The calibrated model was applied to Landfill B including 36 waste samples and twelve variables with four predictor variables.The case study results are twofold: first, the reliable and accurate prediction of the twelve variables can be achieved with the knowledge of four predictor variables (Loi, EC, pH and Cl). For the second Landfill B, only ten full measurements would be needed for a reliable prediction of most response variables. The four predictor variables would exhibit comparably low analytical costs in comparison to the full set of measurements. This cost reduction could be used to increase the number of samples yielding an improved understanding of the spatial waste heterogeneity in landfills.Concluding, the future application of the developed model potentially improves the reliability of predicted emission potentials. The model could become a standard screening tool for old landfills if its applicability and reliability would be tested in additional case studies.     

Nanocatalyzed biodiesel synthesis from the oily contents of Marine brown alga Dictyota dichotoma

This research article demonstrates biodiesel synthesis through the methanolysis of the oily contents (4.02 ± 0.27% w/w on dried basis) of Dictyota dichotoma collected from the coast of Hawksbay, Pakistan. The metal oxides (CaO, MgO, ZnO, and TiO₂) used as nanocatalysts were refluxed (5% K₂SO₄), calcinated (850 °C) and characterized by Atomic Force Microscopy (AFM) which produced 93.2% w/w FAME (biodiesel) at relatively mild condition (5% catalyst, 65 °C, 3 h, 18:1 molar ratio) using CaO. Whereas, MgO, ZnO, and TiO₂ produced 92.4%, 72.5%, and 31.8% w/w FAME, respectively at elevated condition (225 °C). Thus, CaO was considered to be the best catalyst among the others. This tri-phase reaction require continuous fast mixing and the yield depends on the reaction parameters like catalyst amount, temperature, reaction time and molar ratio (methanol: oil). The reusability of these heterogeneous catalysts simplified the purification step, reduced the waste generation and make the final product technically and economically viable.     

Determination of Au(III) and Pd(II) ions by flame atomic absorption spectrometry in some environmental samples after solid phase extraction

A simple and sensitive solid phase extraction method was developed for simultaneous separation and preconcentration of gold and palladium ions with N-(4-methylphenyl)-2-{[(4-phenyl-5-pyridine-4-yl-4H-1,2,4-triazol-3-yl)thio]acetyl}hydrazine carbo thioamide complex on Amberlite XAD-1180 resin before their determination by flame atomic absorption spectrometry. Some analytical parameters such as HNO₃ concentration of the sample solution, amount of complexing agent, sample volume, eluent type and volume, effects of foreign ions and adsorption capacity of the resin were investigated for quantitative recovery of gold and palladium ions. The effects of some anions and cations were also examined. Under optimum conditions, the detection limits for gold and palladium ions were found to be 0.29 and 0.19 μg L^?1, respectively. The preconcentration factor for gold and palladium was 250. After being validated by standard addition and analysis of standard reference material, the procedure was successfully applied to the analysis of sea and stream water, anodic slime, gold ore, soil and electronic waste.