新型混凝剂处理印染废水的实验研究

采用自行制备的具有不同SiO2 :Al:Fe(摩尔比值 )和碱化度的两类新型无机高分子混凝剂聚硅酸氯化铝铁 (PSAFC)和聚硅酸硫酸铝铁 (PSAFS)各 7种 ,直接对印染废水进行处理。从中选出 2种混凝剂 ,考察了pH值、混凝剂投量等对混凝效果的影响 ,并对混凝处理后 ,印染废水出水中残留混凝剂主要成分Al、Fe、SiO2 的含量进行分析。实验结果表明 ,氯化物型 (PSAFC)和硫酸盐型 (PSAFS)混凝剂对印染废水的色度、浊度、CODCr均有良好的去除效果 ;总体而言 ,PSAFS的混凝效果略优于PSAFC ;混凝处理后印染废水出水中残留铝、铁、硅的含量均比较低 ;pH值和碱化度对混凝剂在水体中残留铝含量有影响     

超滤与电渗析联用降低油田采出水矿化度中试试验研究

以大庆油田常规处理后的油田采出水为处理对象,建立日产水300t的超滤预处理和电渗析脱盐处理中试试验装置.考察该工艺所能达到的技术经济指标,掌握放大规律,为万吨级工业装置和系统的设计提供基础数据.经过3000h长时间连续试运行,系统出水水质稳定,出水浊度低于1.0 NTU,悬浮物和含油量低于1.00 mg/L,矿化度低于1000 mg/L,水质完全满足配制聚合物用水要求,证明采用处理后的油田采出水代替清水作为聚合物驱用水是可行的.     

Solubilization of substituted indole compounds by beta-cyclodextrin in water

The solubilization of four pairs of substituted indole compounds (SICs) by β-cyclodextrin (β-CD) in water was investigated. The results show that 1,2,3,4-tetrahydrocarbazole and N-methyl-1,2,3,4-tetrahydrocarbazole form 1:1 inclusion complexes with β-CD, while the other six SICs form 1:2 inclusion complexes, respectively. To each pair of SICs with similar structures, the differences between their solubilization in β-CD/water solutions has been explained by the difference of their contact area within the β-CD cavity, the difference of their molecule polarity, or the presence of hydrogen bond between SIC molecule and β-CD molecule.     

Large outdoor chamber experiments and computer simulations: (I) Secondary organic aerosol formation from the oxidation of a mixture of d-limonene and α-pinene

This work merges kinetic models for α-pinene and d-limonene which were individually developed to predict secondary organic aerosol (SOA) formation from these compounds. Three major changes in the d-limonene and α-pinene combined mechanism were made. First, radical–radical reactions were integrated so that radicals formed from both individual mechanisms all reacted with each other. Second, all SOA model species from both compounds were used to calculate semi-volatile partitioning for new semi-volatiles formed in the gas phase. Third particle phase reactions for particle phase α-pinene and d-limonene aldehydes, carboxylic acids, etc. were integrated. Experiments with mixtures of α-pinene and d-limonene, nitric oxide (NO), nitrogen dioxide (NO₂), and diurnal natural sunlight were carried out in a dual 270 m³ outdoor Teflon film chamber located in Pittsboro, NC. The model closely simulated the behavior and timing for α-pinene, d-limonene, NO, NO₂, O₃ and SOA. Model sensitivities were tested with respect to effects of d-limonene/α-pinene ratios, initial hydrocarbon to NO_x (HC₀/NO_x) ratios, temperature, and light intensity. The results showed that SOA yield (Y_SOA) was very sensitive to initial d-limonene/α-pinene ratio and temperature. The model was also used to simulate remote atmospheric SOA conditions that hypothetically could result from diurnal emissions of α-pinene, d-limonene and NO_x. We observed that the volatility of the simulated SOA material on the aging aerosol decreased with time, and this was consistent with chamber observations. Of additional importance was that our simulation did not show a loss of SOA during the daytime and this was consistent with observed measurements.     

PDMDAAC系列絮凝剂的脱色性能研究

研究了二甲基二烯丙基氯化铵聚合物（PDMDAAC）系列絮凝剂对活性染料废水和分散染料废水的脱色效果，考察了絮凝剂的特性粘度、阳离子度及结构等因素对脱色效果的影响，探讨了其脱色机理，并试验了与PAC复配的脱色效果。实验结果表明：絮凝剂的特性粘度越高，阳离子度越高，脱色效果越好；絮凝剂结构中引入乙烯基三甲氧基硅烷（VTMS）可使脱色效果胡所提高；PDMDAAC系列絮凝剂处理活性染料废水的机理是通过电中和作用，使染料分子从水中析出，然后通过吸附架桥作用使之聚集、沉降除去；PDMDAAC系列絮凝剂在处理分散染料废水时，吸附架桥为主导作用；PDMDAAC系列絮凝剂与PAC复配可使脱色效果更佳而且可以降低处理成本。     

城市河道表层水及沉积物中微塑料的污染现状与污染行为

河流是微塑料从陆地向海洋传输的关键路径,在近年来得到了越来越多的研究重视.但实际上,目前关于城市不同区域河道表层水及沉积物中微塑料的污染现状及污染行为研究仍十分有限,相关问题依然不甚清晰.本文以上海市中心城区及郊区城镇区域的8条河道作为研究对象,共采集16个河道表层水及沉积物样品,采用高速摄像仪和傅立叶红外变换光谱仪鉴定样品中微塑料的丰度、尺寸、颜色、形状和类型等特征.结果表明,上海市城市河道表层水中微塑料的平均丰度为(7.5±2.8)个·L~(-1),而沉积物中微塑料的平均丰度(以湿重计)则达到了(1 575.5±758.4)个·kg~(-1).微塑料尺寸越小丰度越高.其中,低于500μm、纤维状、透明色和聚酯类的微塑料始终在上海市城市河道中占据主导地位,但沉积物中的微塑料分布更具多样性.相对于国内外其他城市河道中的微塑料污染,上海市城市河道中的微塑料污染较为严重.不同城市河道中,微塑料的形状和聚合物类型分布受到来源(主要为洗衣废水、个人护理产品和塑料废弃物等)、水动力学条件和本身理化性质等各种因素的较大影响.还进一步讨论了城市河道中微塑料的污染行为(来源、传输与归趋),并解析了各种环境因子对其造成的潜在影响.     

Preparation and characterization of a novel hybrid chelating material for effective adsorption of Cu(Ⅱ) and Pb(Ⅱ)

The discharge of heavy metal ions such as Cu~2+and Pb~2+poses a severe threat to public health and the environment owing to their extreme toxicity and bioaccumulation through food chains Herein, we report a novel organic–inorganic hybrid adsorbent, Al(OH)_3-poly(acrylamide dimethyldiallylammonium chloride)-graft-dithiocarbamate(APD), for rapid and effectiv removal of Cu~2+and Pb~2+. In this adsorbent, the "star-like" structure of Al(OH)3 poly(acrylamide-dimethyldiallylammonium chloride) served as the support of dithiocarbamat(DTC) functional groups for easy access of heavy metal ions and assisted development of larg and compact floccules. The synthesized adsorbent was characterized by scanning electron microscopy(SEM), transmission electron microscopy(TEM), Fourier transform infrared spectroscopy(FTIR), and thermogravimetric analysis(TGA). APD was demonstrated to hav rapid adsorption kinetics with an initial rate of 267.379 and 2569.373 mg/(g·min) as well a superior adsorption capacities of 317.777 and 586.699 mg/g for Cu~2+and Pb~2+respectively. Th adsorption process was spontaneous and endothermic, involving intraparticle diffusion and chemical interaction between heavy metal ions and the functional groups of APD. To assess it versatility and wide applicability, APD was also used in turbid heavy metal wastewater, and performed well in removing suspended particles and heavy metal ions simultaneously through flocculation and chelation. The rapid, convenient and effective adsorption of Cu~2+and Pb~2+give APD great potential for heavy metal decontamination in industrial applications.     

以可生物降解固体为碳源的城市污水厂尾水反硝化脱氮研究

针对城市污水厂尾水氮排放不达标的现象,提出以可生物降解聚合物作为固体碳源的反硝化生物滤池技术。研究结果表明,尾水中氮的去除率会随水力停留时间(HRT)的延长而增加,HRT≤8 h时,去除率增长速度较快;HRT>8 h时,脱氮效率增长趋于平缓。选用聚羟基丁酸戊酸共聚酯(PHBV)为碳源,HRT为8 h时脱氮效果最佳,连续稳定运行30 d,出水硝态氮的去除率达96.1%~97.4%,出水中总氮浓度达GB 3838—2002《地表水环境质量标准》Ⅴ类水标准。     

不同类型清水剂处理油田含聚污水的效果对比

考察了阳离子型CWC-14、非离子型NQS-01和阴离子型AQS-08 3类清水剂对油田含聚污水的处理效果,对比了它们的作用特点和絮体性能。实验结果表明:在清水剂加入量350 mg/L、处理温度65℃、搅拌转速300 r/min、搅拌时间5 min的条件下,CWC-14、NQS-01和AQS-08对含聚污水的除油率分别为98.8%、98.0%和99.4%;NQS-01受处理温度、搅拌条件影响较大;CWC-14受污水中聚合物质量浓度影响最大。清水剂的絮体特点与其作用机理有关,CWC-14的絮凝速率最快,起效时间最短,絮体呈黏性大块状;NQS-01的絮凝速率最慢,起效时间最长,絮体呈浮油状;AQS-08的絮凝速率和起效时间适中,絮体呈松散状、流动性好。对比结果表明,非阳离子型清水剂可有效避免油田含聚污水处理过程中的黏性油泥问题。