不同墩高下连续刚构桥抗震性能分析

以某大跨连续高墩刚构桥为依托,采用Midas/civil软件建立仿真模型,通过时程分析方法研究双肢薄壁墩参数在地震响应下对高墩连续刚构桥抗震性能的影响。以桥墩高度为主要参数,以模型阵型频率、桥墩墩顶、墩底位移及内力变化三个方面对其抗震性能进行评价。研究结果表明,随着其中一个桥墩高度的增加,桥梁频率不断减小,矮墩墩底及矮墩主梁根部出现内力最大值。随墩高的增加,矮墩内力越来越大,高墩内力逐渐减小。     

基于荷载试验的空心板桥加固效率分析

基于3座预应力混凝土空心板桥在试验荷载下加固前后荷载试验及理论计算得出的板底平均应力和挠度结果,对比粘贴碳纤维筋加固、简支转连续加固和粘贴钢板加固3种方法对简支预应力空心板桥结构的力学性能的提升效果。结果表明,粘贴碳纤维筋加固及粘贴钢板加固方法对结构刚度有轻微提高,对结构的延性及承载力有一定的提高;简支转连续加固方法在荷载作用下挠度减小最为明显,对结构刚度和承载力提升明显,对支点处的抗剪承载力也有所提升。     

桥式起重机典型事故分析及安全管理

分析了桥式起重机典型事故发生机理,运用事故树分析法对桥式起重机事故发生进行了分析,从而为能够找出安全隐患,制定出最优的控制措施提供了理论上的依据.最后根据分析结果,系统地提出了控制危害,降低事故发生率的安全管理措施,提出一些具有可行性的建议.     

Method for Rapidly Assessing the Overtopping Risk of Bridges Due to Flooding over a Large Geographic Region

Hydraulic events are a leading cause of bridge failures. While these hydraulic events are accounted for in bridge design, changing environmental and land use conditions require continual updating of this risk. For example, after a bridge has been constructed, streamflow can change in unanticipated ways as a result of land use changes, geomorphic changes, and climate change. The objective of this research was to create a screening method able to quickly and inexpensively estimate overtopping risk across a collection of bridges based on the current streamflow conditions. The method uses a geographic information system, nationally available and standardized datasets, and recent regression equations to quantify bridge vulnerability to overtopping for flooding with varying return periods. This screening method could also be used to assist decision makers in updating the Waterway Adequacy field in the National Bridge Inventory, which indicates the overtopping risk of bridges. The method was applied to a portion of the Hampton Roads region of Virginia, United States that includes 475 bridges. The results of the analysis, when combined with transportation data for bridges, aid decision makers to assign further resources to complete more detailed analyses of bridges identified as being at risk for overtopping.     

Toxicological characterization of the landfill leachate prior/after chemical and electrochemical treatment: A study on human and plant cells

In this research, toxicological safety of two newly developed methods for the treatment of landfill leachate from the Piškornica (Croatia) sanitary landfill was investigated. Chemical treatment procedure combined chemical precipitation with CaO followed by coagulation with ferric chloride and final adsorption by clinoptilolite. Electrochemical treatment approach included pretreatment with ozone followed by electrooxidation/electrocoagulation and final polishing by microwave irradiation. Cell viability of untreated/treated landfill leachate was examined using fluorescence microscopy. Cytotoxic effect of the original leachate was obtained for both exposure periods (4 and 24 h) while treated samples showed no cytotoxic effect even after prolonged exposure time. The potential DNA damage of the untreated/treated landfill leachate was evaluated by the comet assay and cytokinesis-block micronucleus (CBMN) assay using either human or plant cells. The original leachate exhibited significantly higher comet assay parameters compared to negative control after 24 h exposure. On the contrary, there was no significant difference between negative control and chemically/electrochemically treated leachate for any of the parameters tested. There was also no significant increase in either CBMN assay parameter compared to the negative control following the exposure of the lymphocytes to the chemically or electrochemically treated landfill leachate for both exposure periods while the original sample showed significantly higher number of micronuclei, nucleoplasmic bridges and nuclear buds for both exposure times. Results suggest that both methods are suitable for the treatment of such complex waste effluent due to high removal efficiency of all measured parameters and toxicological safety of the treated effluent.     

Effects of compression ratio,swirl augmentation techniques and ethanol addition on the combustion of CNG–biodiesel in a dual-fuel engine

The diminishing resources and continuously increasing cost of petroleum in association with their alarming pollution levels from diesel engines has led to an interest in finding alternative fuels to diesel. Emission control and engine efficiency are two of the most important parameters in current engine design. The impending introduction of emission standards such as Euro IV and Euro V has forced research towards developing new technologies for combating engine emissions. This paper examines the effects of compression ratio, swirl augmentation techniques and ethanol addition on the combustion of compressed natural gas (CNG) blended with Honge oil methyl esters (HOME) in a dual fuel engine. The present results show that the combustion of HOME and 15% ethanol blend with CNG induction in a dual-fuel engine operated in optimized parameters at an injection timing of 27° Before Top Dead Centre and a compression ratio of 17.5 resulted in acceptable combustion emissions and improved brake thermal efficiencies. The implementation of swirl augmentation techniques increased brake thermal efficiencies (BTEs) and considerably reduced combustion emissions such as smoke, HC, CO and NO_x. The addition of ethanol also increased BTEs. However, at more than 15% of ethanol in HOME, NO_x emissions increased dramatically.     

Adaptive Management of Stream Channel Maintenance at Bridge Crossings in the Northern Tier Region,Pennsylvania1

Abstract: An adaptive management framework is applied to the problem of identifying mitigation measures for sediment deposition near bridge crossings in small streams in the Northern Tier region of northern Pennsylvania. The presence of the rigid bridge infrastructure introduces a challenge for applying adaptive management practices, because the integrity of the bridge structure itself has to be maintained regardless of the mitigation practices used in the stream channel near the bridge. In an effort to overcome the unacceptable risk that field‐scale adaptive management experiments present to rigid bridge infrastructure, an adaptive management approach for laboratory‐scale experimentation of mitigation methods at bridge crossings in the Northern Tier region is presented as a way to decrease the level of uncertainty about channel response to mitigation measures and increase the rate of learning about the effectiveness of these measures. Four cycles of adaptive management experiments are discussed to demonstrate that this approach results in fast and efficient learning about channel response to mitigation methods for the given conditions. The value of monitoring and of assessment of monitored data in the overall efficiency of the adaptive management approach is highlighted. Assessment of what was learned in the adaptive management experiment cycles presented here leads to new directions to continually improve management policies and practices in stream channels at bridge crossings in the Northern Tier region. The adaptive management process, rather than continuing with a normally risk‐averse management approach, results in opportunities for learning new information about a system’s response.     

桥梁安全综合评价体系构建及重心法评价研究

目前桥梁安全综合评价研究并不成熟,在分析了桥梁安全综合评价应该考虑的主要因素的基础上,提出并确立了桥梁安全综合评价体系.探讨了应用模糊重心决策法进行桥梁安全综合评价的实现过程,为桥梁安全管理人员和安监部门理性决策提供理论依据.     

斜拉桥支架法施工的自适应安全监测技术

介绍自适应控制的基本原理及其运用现状。根据斜拉桥的实际情况选用自适应控制形式,在主要部位埋设传感器和相关的测试仪器,明确监测时间并在实施中严格执行。依据实测结果对标高、应力、容重等参数按实际情况进行修正,得出施工过程中的受力状态,从而调整施工。算出主梁各节点理论施工预拱度变化曲线等数据并与实测值进行比较,反复修正。自适应法达到了仿真计算与实际施工过程保持一致的最佳施工控制效果。绥芬河斜拉桥的施工证明,自适应法是一种很适合斜拉桥支架施工安全监测的技术,值得推广应用。     

基于灰预测模型的大跨度预应力混凝土桥梁施工监测

运用灰色系统理论,建立大跨度预应力砼刚构-连续组合梁桥悬臂浇筑施工梁段立模标高预测的GM(1,1)模型,并用残差的GM(1,1)模型对其进行修正;同时把该预测模型应用于松原龙华松花江特大桥实际工程;其结果表明梁段立模标高预测精度较高,完全能够满足工程的需要,为同类桥梁的施工监测提供参考。