Influence of agricultural activities, forest fires and agro-industries on air quality in Thailand

Annual and monthly-based emission inventories in northern, central and north-eastern provinces in Thailand, where agriculture and related agro-industries are very intensive, were estimated to evaluate the contribution of agricultural activity, including crop residue burning, forest fires and related agro-industries on air quality monitored in corresponding provinces. The monthly-based emission inventories of air pollutants, or, particulate matter (PM), NOx and SO₂, for various agricultural crops were estimated based on information on the level of production of typical crops: rice, corn, sugarcane, cassava, soybeans and potatoes using emission factors and other parameters related to country-specific values taking into account crop type and the local residue burning period. The estimated monthly emission inventory was compared with air monitoring data obtained at monitoring stations operated by the Pollution Control Department, Thailand (PCD) for validating the estimated emission inventory. The agro-industry that has the greatest impact on the regions being evaluated, is the sugar processing industry, which uses sugarcane as a raw material and its residue as fuel for the boiler. The backward trajectory analysis of the air mass arriving at the PCD station was calculated to confirm this influence. For the provinces being evaluated which are located in the upper northern, lower northern and northeast in Thailand, agricultural activities and forest fires were shown to be closely correlated to the ambient PM concentration while their contribution to the production of gaseous pollutants is much less.     

Effect of MoO3 on vanadium based catalysts for the selective catalytic reduction of NOx with NH3 at low temperature

The selective catalytic reduction(SCR) activities of the MoO_3 doped V/WTi catalysts prepared by the incipient wetness impregnation method at low temperature were investigated.The results showed that the addition of MoO_3 could enhance the NO_ xconversion at low temperature and the best SCR activity was obtained when the dosage of MoO_3 reached5 wt.%. The NH3-TPD and DRIFTS experiments indicated that the addition of MoO_3 changed the type and number of acid sites on the surface of catalysts and reaction activities of acid sites were altered at the same time. The redox capacity and amount of active oxygen species got improved for V3Mo5/WTi catalyst, which could be confirmed by the H_2-TPR and transient response experiments. Water vapor inhibited the NO_xconversion at low temperature. Deposition of ammonium sulfate or bisulfate might be main reason for the loss of catalytic activity in the presence of SO_2 at low temperature. Choosing the suitable NH_3/NO ratio and elevation of reaction temperature both could weaken the influence of SO_2 on the SCR activity of the V3Mo5/WTi catalyst. Thermal treatment of the deactivated catalyst at350°C could get the low temperature activity recovered. The decrease of GHSV improved the de NO_x efficiency at low temperature and we speculated that the rational technological process and operation parameters could contribute to the application of this kind of catalysts in real industrial environment.     

基于遗传神经网络的除湿机故障诊断与寿命预测

目的识别除湿机的性能状态和预测吸附剂的剩余寿命。方法针对除湿机故障过程缓变的特点,提出一种基于数据驱动的遗传神经网络模型。首先,为解决设备失效程度划分模糊的问题,由5个热力参数组成反映吸附剂劣化程度的特征向量,关联分析得到除湿机的5类故障模式。其次,利用遗传神经网络建立状态参数和故障模式的映射关系。最后,对表征设备吸附能力的主参数进行外推预测。结果训练好的诊断网络可准确地识别出设备的劣化程度及其演变过程,预测网络的预测精度非常高。结论该方法可有效地实现对除湿机的故障诊断与预测。。     

高原高寒地域中重型车辆进气预热起动辅助装置研究

目的解决高海拔地域中重型越野车辆的起动困难问题。方法从进气温度对车辆起动的影响因素入手,系统地研究几种典型进气预热型式的优缺点。针对中型和重型两台越野车的具体情况,设计选型集中加热的电阻型格栅式进气预热器。经设计计算和反复测试,确定两型加热器的尺寸和功率等主要参数和控制策略,计算分析与车载蓄电池的匹配关系。结果对两型进气预热器进行实车安装后,分别经过实验室试验和野外现场验证,在-30℃实验室常压环境和-27℃的高原环境条件下,两型车辆均能在3 min内顺利起动。结论在高原高寒地域,格栅式电阻进气预热器可有效解决-30℃以上温度范围的起动困难问题。该装置结构简单、安装方便、可靠性高,便于中重型车辆加装使用,为该类问题提供了有效的技术解决途径。     

罕见冬季降雨中人工增雨微物理过程分析研究

用Micaps实时资料、CPAS卫星反演分析资料、NCEP再分析资料、ECMWF再分析资料,多普勒雷达PUP产品资料,对2015年12月1日夜间至2日凌晨沈阳地区罕见冬季降雨过程,进行了天气学分析、及大气微物理人工增雨作业条件分析,并结合沈阳地区人工增雨作业指标,得出本次降雨过程在厄尔尼诺正在发生的背景下,为常见的高空槽转东北冷涡型,水汽、动力等微物理作业条件也适合于开展人工增雨作业,并给出了相应的作业指导参数,为沈阳地区今后在冬季降雨天气过程中开展人工增雨作业积累了宝贵经验.     

远程火箭弹高弹道飞行温度环境分析

目的在不采用防热涂层的前提下,为满足远程火箭弹高弹道飞行的防热需求,提出增加壳体厚度的设计思路。方法通过弹道耦合的气动加热计算,分析不同材料、不同厚度壳体的弹头壁面在飞行过程中的温度变化情况。结果壳体厚度达到20 mm以上时,铝、钢、铜三种材料壳体的外壁面温度均低于150℃,而相同厚度的壳体,钢壳的降温能力最强。结论增加壳体厚度可以有效降低弹头壳体壁面温度。     

金属尖化前缘模型主动式热疏导性能试验研究

目的为了更好地解决高超声速飞行器舵、翼前缘及头锥等气动热环境恶劣区域的热防护问题。方法采用主动式热疏导技术,以高温液态合金为工质,设计并制作具有主动式热疏导功能的尖化前缘金属试验模型(R=5 mm)。根据模型外尺寸设计加工一套石英灯仿形加热器和热流测试模型,开展地面热环境模拟试验。结果试件在前缘中心温度530℃左右时具有瞬态启动特性。前缘中心和大面积中心最大辐射热流密度分别为1000 kw/m^2和580 kw/m^2,试件在该环境中长时间受热状态下仍具有较好的热疏导能力。试验后试件无工质泄漏和结构破坏,具有一定的可重复使用性。结论可以此热疏导方式结合现有成熟热防护技术进一步开展工程设计与应用。     

丁腈橡胶密封圈高温老化行为——自由状态和承压状态

目的研究丁腈橡胶密封圈自由状态和承压状态下的高温老化行为。方法以拉伸强度和拉断伸长率为参数,对各温度下的老化行为进行表征和分析。结果 70℃条件下机械应力大大加快了橡胶密封件拉伸强度的下降速率,以致试验64 d时拉伸强度甚至比110℃时还低,拉断伸长率的下降速率也明显加快了;90℃加速条件下机械应力对拉伸强度的下降有一定的促进作用,但对拉断伸长率的变化基本无影响;110℃加速条件下机械应力对拉伸强度和拉断伸长率均没有明显的影响。结论机械应力在较低温度下可以显著促进丁腈橡胶密封圈热氧老化,高温条件下促进作用不明显。     

太湖流域污水处理厂低温生物脱氮运行模式研究

以苏州工业园区第二污水厂在冬季低温下的实际运行为例,重点分析了低温生物脱氮的影响因子,并探讨影响低温生物脱氮的因素.根据污水处理厂冬季水温特征和低温脱氮影响规律,结合污水厂运行经验和数据分析提出太湖流域污水厂低温生物脱氮的适合措施,以达到低温下保证运行效果使出水达标,并结合冬季低温下太湖流域污水厂的特点,为保证总氮出水达标提出来了相应的解决方案和措施.     

太原市城市化发展对城市气温变化影响的定量化研究

采用位于同一纬度的太原气象站与远郊区农村气象站获取的1957年-2014年的气象数据,用皮尔卡森相关系数、一元线性回归、城市化影响分析等方法研究了在全球气候变暖背景下城市地区气温变化趋势以及城市化影响.结果表明:城市年平均气温升高趋势明显高于农村;城市年极端高温与农村极端高温升高趋势差异不明显;城市年极端低温升高趋势显著高于农村.就城市化影响而言,城市化对年平均气温、年极端低温趋势影响明显,但对年极端高温趋势影响微弱.