韶钢新石灰窑烟气除尘技术的应用

韶钢新石灰窑烟气除尘系统要用旋风除尘器、金属管式换热器、高效陶瓷多管除尘器的组合方式。介绍了该系统的设计参数、工艺流程、主要设备及其功能。     

掘进巷道粉尘控制技术的研究

针对掘进巷道的特点,研制了一种高效实用的自激式水浴水膜除尘器,并对其结构、除尘过程和与掘进机相配套的方式进行了研究分析。还对掘进巷道中的产尘源进行了调查和分析,认为掘进巷道的防尘方法：应先采用掘进机头的内外喷雾,然后采用长压短抽的通风除尘系统和利用除尘器将含尘空气进行净化;对转载点除尘采用简易闭密罩加喷雾;对巷道周壁的粉尘采用喷洒粘尘剂固尘,才能有效地降低整个巷道的粉尘浓度。     

基于CFD-DEM的旋风除尘器内气固流动特性研究

为了研究旋风除尘器内气固流动特性,采用CFD-DEM耦合算法研究不同入口气体速度下旋风除尘器内颗粒流态、静压、径向速度及轴向速度分布特征。结果表明:煤屑颗粒在离心力和径向曳力的作用下以螺旋颗粒条带靠近除尘器的壁面稳定向下移动,随着入口风速的增加煤屑颗粒条带变宽,条带与除尘器的第1次接触的拐点上移,螺距减小;除尘器内部压力轴向变化较小,径向变化较大,随着入口气体速度增加,除尘器壁面附近高压区范围和压力也随之增加,除尘器上方和下方的负压区变宽并朝轴向方向延伸;随入口气体速度增加,除尘器内径向速度和轴向速度逐渐增加,煤屑颗粒在除尘器中部聚集较多,煤屑停留时间变长,入口气体速度为15 m/s时,煤屑颗粒在除尘器内停留时间最长。     

冲激式湿式除尘器在燃用高挥发份煤锅炉除尘的应用

本文总结了各种类型除尘器在使用当地含挥发份较高的长焰煤种过程中的除尘效率,及其性能特点,详细阐述了冲击式湿式除尘器在燃用高挥发份煤锅炉除尘中的应用效果。     

Experimental investigation on effect of an absorber plate covered by a layer of sand on the efficiency of passive solar air collector

A passive flat-plate solar air collector was constructed in the laboratory of New and Renewable Energy in Arid Zones, Ouargla University, South East Algeria. The absorber of the passive flat-plate solar air collector was laminated with a thin layer of local sand. This acted as a thermal packed bed with a collecting area of 0.5 m² (1 m × 0.5 m). Three series of experiments were performed. The first consisted of choosing the best sand brought from three different places of the Algerian desert. The second consisted of studying the effect of the thickness of the sand layer on the daily efficacy of the collector. The influence of the sand diameter was investigated in the third series. The experimental results showed that: All collectors covered with sand had higher efficiency than those without. It was noticed that, for a fixed mass of sand (given thickness of the sand layer), the improvement of the collector was inversely proportional to the sand particle diameters. The maximum efficiency approximates 62.1% for a particle diameter 0.063 mm, compared to 41.71% for a diameter 0.250 mm.The efficiency of the collector for a fixed particle diameter increases with the increase in the thickness of the sand layer. The collector with thickness sand layer 0.84 mm gave the best efficiency of 46.14% compared to 27.8% for 0.28 mm of thickness sand layer.     

氧化铝熟料窑粉尘的特性和电收尘技术的应用

分析了氧化铝熟料粉尘的特性,介绍了中国铝业公司山尔分公司氧化铝熟料窑窑尾电收尘的改造情况及电收尘本体的结构特点。     

Theoretical and Experimental Investigation of a Novel Hybrid Heat-Pipe Solar Collector

Abstract

This article describes a novel flat plate heat-pipe solar collector, namely, the hybrid heat-pipe solar collector. An analytical model has been developed to calculate the collector efficiency as well as simulate the heat transfer processes occurring in the collector. The effects of heat pipes/absorber, top cover, flue gas channel geometry, and flue gas temperature and flow rate, on the collector efficiency were investigated based on three modes of operation, i.e., solar only operation, solar/exhaust gas combined, and solar, exhaust gas and boiler combined. Experimental testing of the collector was also carried out for each of these modes of operation under real climatic conditions. The results were used to estimate the efficiency of the collector and determine the relation between the efficiency and general external parameter. The modeling and experimental results were compared and a correlation factor was used to modify the theoretical predictions. It was found that the efficiency of the collector was increased by about 20–30% compared to a conventional flat-plate heat pipe solar collector.     

高炉煤气干法布袋除尘技术的应用

高炉煤气干法布袋除尘技术是钢铁行业重要的综合节能环保技术之一,以其煤气净化质量高、节水、节电、投资省、运行费用低、环境污染小等优点,优于传统的湿法洗涤除尘工艺,是国家大力推广的清洁生产技术。本文以承德钢厂1260米3高炉干法布袋除尘技术为例,介绍了该技术的工艺流程及主要参数,对设计过程中要注意的几个问题进行了分析论述,同时对该技术进一步的发展方向提出了见解,并建议国家相关部门应大力推广和使用这一技术,使其在节约能源和环境保护的建设中发挥更大作用。     

Experimental analysis of thermal performance of evacuated tube and flat-plate solar air collectors at different air flow rates

The thermal performances of an evacuated tube collector (ETC) and flat-plate solar air collector (FPC) are experimentally investigated at different air flow rates. To investigate the performance of the ETC and FPC, experimental set-ups were fabricated. Air was used as a working fluid and tested at the same climatic conditions. The ETC had 15 evacuated tubes with a surface area of 1.66 m². The experimental set-up consisted of a header with a hollow pipe (square pipe) in the centre through which the air flowed. The flat-plate collector had a surface area of 1.35 m². The FPC had a black painted absorber sheet which divides the collector into two sections. The air flowed through the upper and the lower sections parallel to the collector to minimize the overall heat loss. The temperature of the outlet air depends on several factors along with the airflow rate and the intensity of the solar radiation. It was found that during the day at high flow rates, the efficiency of the ETC varies from 0.12 to 0.5, and for the flat plate it was from 0.29 to 0.68. The maximum temperature of the air was 56.7°C for the ETC and 25.7°C for the FPC.     

电捕法净化焙烧炉沥青烟气

针对炭素焙烧炉烟气特点,采用雾化水预处理和电捕焦油技术,对某炭素厂焙烧炉烟气进行治理,达到既高效净化有害气体,又降低资金投入。处理后的烟气指标为:沥青烟浓度13.8mg/m3,苯并(a)芘浓度0.053×10-3mg/m3,烟尘浓度19.1mg/m3,各项污染物均达标排放。