三维电极电解硝基苯废水处理实验研究

以涂膜活性炭-活性炭为填充粒子,对三维电极电解硝基苯废水进行了研究。通过实验探讨了投盐量、槽电压、主电极间距、反应时间及初始浓度对电解硝基苯废水的影响。结果表明,三维电极在电极间距为9mm、槽电压为20V、硫酸钠投加量为1.5g/L、pH值为6、电解时间为90min的条件下,硝基苯去除率可达90%以上。在三维电极电解作用下,硝基苯转化为可生化和低毒的苯胺,苯胺在三维电极电解作用下还可以得到进一步的降解。     

CFG桩复合地基加固高速公路软基的现场试验研究

CFG桩复合地基处理高速公路软基的设计参数是否合理,应看其实际发挥的承载能力及承载时变形的性状。通过对CFG桩复合地基桩、土应力和表面沉降的现场观测,研究了路堤荷载下CFG桩复合地基桩顶、桩间土的应力和沉降变化规律,根据实测数据分析了褥垫层厚度、桩间距及桩体强度等设计参数的合理性。结果表明,路堤荷载下,CFG桩、土最终可达到变形协调,桩、土应力比与桩、土沉降差有着密切的关系,疏桩形式时桩间土承担着大部分荷载;同时,CFG桩复合地基作为路堤荷载的地基时,可设计为桩间距较大的疏桩形式,桩体设计强度可以取得低一些,褥垫层厚度也应适当取大。     

特种胶塑复合管抗张强度计算

通过对特种胶塑复合管的抗张强度计算和生产实践，证明了矿用充填管路采用胶塑复合管是可行的。为矿用充填管以胶塑复合管替代铁管提供了依据。     

Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

夹点技术--一种有效的清洁生产方法

夹点技术作为一种有效的清洁生产措施可用于能源优化、资源节约、废物减量及污染防治等方面，能收到良好的经济效益和环境效益。本文介绍夹点技术的基本原理、应用研究领域及其发展趋势。     

聚合硅酸硫酸铝铁的制备与应用

在n(Fe A1)／n(Si)为0．5～1．0、n(Al)／n(Fe)为2．5～3．0、SiO2质量分数为2．3％、硅酸钠溶液的活化pH为5．5、硅酸钠溶液的活化时间为12min或SiO2的质量分数为2．0％、硅酸钠溶液的活化pH为6．0、硅酸钠溶液的活化时间为3min的条件下，制备出的聚合硅酸硫酸铝铁对废水的除浊效果最佳，除浊率大于98％。     

溶出伏安法中电极的操作技术

电极性能的优劣是完成溶出伏安分析的关键,本文就三电极体系中电极的选择、处理、安装、使用、维护方法等方面作了较详细的说明和探讨,提高了方法的精密度和准确度,使溶出伏安法在海水分析中得到更好的应用.     

Proposing of new building scheme and composite towards global warming mitigation for Malaysia

The building sector has been regarded as a potential sector where there is large capacity to reduce the climate change effect. This study has proposed solutions to mitigate environmental impacts and achieve low CO₂ emission from residential sector. Therefore, full life cycle assessment (LCA) has been run to assess the CO₂ emission and its effect on the atmosphere and climate change. Based on the result, timber scheme is the best choice due to releasing less CO₂ emissions to the atmosphere. However, house builders in Malaysia have almost completely neglected timber as a building material, with timber use as building components reduced to 5%. In this study, LCA Software was used to assess CO₂ emissions from different wall construction. The alternative building scheme has been made by reinforce steel stud, wooden beam and timber wall (S8) to improve the scheme deficiency while releasing less CO₂ emissions compared to other schemes. Therefore, S8 has a decreased CO₂ effect by 85% less than precast concrete frame and 90% less than brick over their lifetime. (S8) increased the load bearing compared to conventional timber beam. Thus, new scheme S8 could be replaced by current scheme and promote more adjustable scheme for Malaysian housing.     

新型二氧化铅电极处理染料废水

利用高压塑片法制备掺杂镧和活性炭以及聚四氟乙烯(PTFE)的新型二氧化铅电极,采用X衍射(XRD),循环伏安曲线(CV),扫描电镜(SEM)等手段对电极性能进行表征,研究了其电催化处理有机染料废水(亚甲基蓝)的降解效果,并对反应机理进行了相关研究。研究表明,该电极具有良好的抗腐蚀能力,对亚甲基蓝具有较好的降解效果。通过与普通二氧化铅电极比较,该电极在染料脱色和去除COD方面都有较明显优势,显示出较好的工业应用前景。     

Microbial fuel cells: Advances in electrode modifications for improvement of system performance

There is an increasing trend to conduct the researches related to Microbial Fuel Cells (MFCs) in the recent years. Limited power output has been the major obstacle for the practical application and upscaling of MFCs. Attempts have been made on electrode modifications such as anode treatments, cathode modifications with catalysts and bio cathodes developments to produce varying degrees of improved output current depending upon the types of modifications. Power density and Coulombic efficiency have been considered as the important parameters to analyze the system performances. This paper overviews on the advances made in MFCs’ researches focusing on different types of electrodes modifications along with the involved methodology. Furthermore, the system performances of different modified MFCs are compared in terms of the power density and the Coulombic efficiency.