LNG船舶锚泊安全距离定量计算建模

为保障液化天然气船舶(LNG船舶)锚泊安全,提出了一种基于船舶漂移运动和船舶碰撞风险的锚泊安全距离计算方法.首先,结合船舶运动数学模型,通过蒙特卡洛模拟LNG船舶走锚漂移运动,得出走锚漂移方向概率密度函数,从而确定船舶走锚漂移横向、纵向距离;同时,结合船舶碰撞概率模型、船舶碰撞损害模型和LNG火灾模型,建立LNG船舶碰撞风险模型,确定满足碰撞概率和风险可接受的安全距离.最后,比较两种模型计算结果,并取其较大值作为LNG船舶锚泊安全距离.结果表明,LNG船锚泊安全距离不仅与环境水域的风、流情况有关,还与附近水域内船舶大小及速度有关.建议交通管理中需结合水域环境特征和水域船舶特点确定LNG船舶的锚泊安全距离.     

The effect of landfill leachate composition on organics and nitrogen removal in an activated sludge system with bentonite additive

A pre-denitrification activated sludge system (AS) without internal recycle was used in lab-scale studies of landfill leachate treatment. A bentonite supplement at a ratio of 1:4 (mineral : biomass) was used to ensure high sludge settling levels and to serve as a micro-organisms carrier. The system was operated within different parameters such as hydraulic retention time (HRT), ammonia loading rate (ALR) or external recycle ratio, which was adapted to treat varying leachate concentrations of COD and ammonia, ranging from 1020 to 2680 mgO(2)l(-1) and 400-890 mgNH(4)-Nl(-1) respectively. The nitrification was complete and ammonia oxidation reached 99%; this was obtained while the ALR did not exceed 0.09 g NH(4)(+)-Ng(-1)MLVSS d(-1) and HRT was not lower than 1 day (in the aeration reactor). The performance of denitrification was successfully improved by controlling the external recycle rate, when the BOD(5)/N ratio in the raw leachate was 4.1. Consequently, N-removal of up to 80% was achieved. A 10-fold decrease in the denitrification rate was obtained at a BOD(5)/N ratio of 0.5. The efficiency of COD removal varied significantly from 36% to 84%. The positive effect of bentonite addition was determined and is discussed based on preliminary studies. The experiments were carried out in fill-and-draw activated sludge with bentonite; the biomass ratio was 1:2. The activated sludge with bentonite was fed with a synthetic high ammonia and organic-free medium.     

Growth substrate selection and biodegradation of PCP by New Zealand white-rot fungi

Nine New Zealand native white-rot fungi were studied for their ability to grow and survive on different substrates formulated from bark, wheat straw, sawdust, apple pomace and maize products in order to identify their pentachlorophenol (PCP) biodegradation potential and to select a fungal carrier for bioaugmentation of polluted soils. Isolates were also evaluated to mineralize (14)C-PCP in liquid culture and in soil. The American fungus Phanerochaete chrysosporium outgrew the native fungi on the substrates tested, but the high colonisation did not result in superior PCP dechlorination as measured by chloride release. Whilst Trametes versicolor inocula produced on wheat straw and SCS (sawdust-corn meal-starch-mix) gave the highest chloride release, colonization of these two substrates as measured by biological potential was lower compared to the pomace and pomace-sawdust-mix. Neither lignin peroxidase nor manganese peroxidase production were measured for New Zealand white-rot fungi during the experiments. Laccase was the only enzyme detected. In liquid culture, the mineralisation rate was higher for T. versicolor isolates compared to P. chyrysoporium. Very little to no pentachloroanisole (PCA) was captured in the volatile fraction of T. versicolor isolates, whereas 75% of the volatile fraction of P. chrysosporium consisted of PCA. The soil microcosms studies, using contaminated soil from a timber treatment site, clearly showed that the New Zealand T. versicolor isolates mineralized PCP. Degradation of PCP in non-sterile soil was higher in the presence of white-rot fungi than in soil without white-rot fungus. This demonstrates that viable white-rot fungus is necessary for significant PCP degradation and that T. versicolor isolates showed PCP remediation potential. Wheat straw and SCS could be suitable carriers for New Zealand native T. versicolor isolates for bioremediation of PCP polluted soil sites.     

利用固定化细胞技术处理废水研究进展

固定化细胞技术是一门新兴的废水处理技术。与固定化酶技术相比,固定化细胞技术保持了原有的多酶系统,对于需要多酶顺序作用的反应更具优势,且不需要辅酶再生。其缺点是必须使用胞内酶,且难以去除细胞内的“副作用”酶。介绍了目前常见的四类固定化方法(即吸附法、包埋法、共价结合法和交联法)、三类固定化细胞载体材料(即有机高分子载体、无机载体和复合载体)以及该方法在废水处理中的应用,并提出了在应用中有待解决的问题。     

Synthesis of a block copolymer of poly(3-hydroxybutyrate) and poly(ethylene glycol) and its application to biodegradable polymer blends

A block copolymer {P[(R,S)-HB-b-EG]} of atactic poly[(R,S)-3-hydroxybutyrate] {P[(R,S)-HB]} and poly(ethylene glycol) (PEG) was prepared by the ring-opening polymerization of -butyrolactone in the presence of a macroinitiator (PEG/ZnEt₂/H₂O) which had been produced by the reaction of ,-dihydroxy PEG ( _n=3000) with ZnEt₂/H₂O (1/0.6) catalyst. The block copolymer ( _n=10,500, _w/ _n=1.2) was an A-B-A triblock copolymer comprising atactic P[(R,S)-HB] (A) and PEG (B) segments. The miscibility, physical properties, and biodegradability of binary blends of microbial poly[(R)-3-hydroxybutyrate] {P[(R)-HB]} with the block copolymer P[(R,S)-HB-b-EG] has been studied. The glass-transition temperature (T _g) data showed that the P[(R)-HB]/P[(R,S)-HB-b-EG] blend was miscible in the amorphous state. The P[(R)-HB] film became flexible and tough by means of blending with P[(R,S)-HB-b-EG] block copolymer. The enzymatic degradation of blend films was carried out at 37°C and pH 7.4 in a 0.1M phosphate solution of an extracellular PHB depolymerase fromAlcaligenes faecalis. The enzymatic degradation took place solely on the surface of the blend films.     

悬浮填料在废水生物处理中的应用进展

综述了悬浮填料及反应性悬浮填料在废水生物处理中的应用。在曝气池中添加悬浮填料对传统活性污泥法进行改进，改造工程简单，并可使原有污水处理场的处理能力及脱氮能力大大提高；悬浮填料与活性污泥法的多种变型相结合，在市场上形成了多种新型反应器和新的商品处理工艺。反应性悬浮填料的使用也已取得一系列成功经验，但仍然要注意反应性悬浮填料本身在废水中的降解问题。     

论档案是文化的载体

档案是自然、社会和人类思维活动的真实反映.它作为一种载体,记录着人类的历史、文明、发展和智慧,是衡量一个国家文明程度的标尺,是人类进步的基础,是知识和信息的汇集.     

Biodegradable Blends Based on Starch and Poly(Lactic Acid): Comparison of Different Strategies and Estimate of Compatibilization

Finding plastic substitutes based on sustainability, especially for short-term packaging and disposable applications has aroused scientific interest for many years. Starch may be a substitute for petroleum based plastics but it shows severe limitations due to its water sensitivity and rather low mechanical properties. To overcome these weaknesses and to maintain the material biodegradability, one option is to blend plasticized starch with another biodegradable polymer. To improve both the compatibility between the main phases and the performance of the final blend, different compatibilization strategies are reported in literature. However, the relative efficiency of each strategy is not widely reported. This paper presents three different strategies: in situ (i) formation of urethane linkages; (ii) coupling with peroxide between starch and PLA, and (iiii) the addition of PLA-grafted amylose (A-g-PLA) which has been elaborated ex situ and carefully analyzed before blending. This study compares the effect of each compatibilization strategy by investigating mechanical and thermal properties of each blend. Compatibilizing behavior of the A-g-PLA is demonstrated, with a significant increase (up to 60%) in tensile strength of starch/PLA blend with no decrease in elongation at failure.     

转锥式生物质热解装置中热载体加热方案选择与设计

根据转锥式生物质热解装置中对加热设备的要求,先后分别选择和设计了三种不同的加热方案,在实际应用中逐步了解每套加热设备的优缺点,为加热设备的改进和该项技术的应用推广奠定坚实的基础.     

负载型纳米TiO2光催化剂的制备及其光催化活性

采用悬浮聚合法制备粉煤灰-聚苯乙烯微珠载体，通过矿化接枝技术将水热法制备的纳米TiO2负载在粉煤灰-聚苯乙烯微珠载体上，制成负载型纳米TiO2光催化剂。用x射线衍射仪、扫描电子显微镜对负载型纳米TiO2光催化剂进行了表征；通过光催化降解甲醛实验评价了负载型纳米TiO2光催化剂的活性。实验结果表明，纳米TiO2在载体上分散良好，平均粒径为36．4nm；该催化剂活性较高，明显优于粉体纳米TiO2光催化剂，重复使用10次左右，该催化剂的活性无明显下降。