海洋大气环境下磷钒系耐候钢腐蚀数据分析

本文通过大气环境暴露试验,研究了在青岛海洋大气环境中暴露10年5周期的4种磷钒系耐候钢的腐蚀规律。结果表明,四种耐候钢的腐蚀速率的关系为:10CrPV10CuPV10MoPV08PV,耐侯钢的耐蚀性与添加元素类别和添加量相关。平均腐蚀深度数据拟合结果表明,A值大小顺序为:10CrPV10CuPV10 MoPV08PV,而n值的顺序是:10CuPV10CrPV10MoPV08PV。     

汽车常见腐蚀问题分析及改进措施探讨

汽车是耐用消费品,服役环境较恶劣,经常会发生腐蚀问题;腐蚀不仅影响汽车美观,而且还直接影响汽车质量和使用寿命。本文主要就汽车腐蚀类型及常见腐蚀问题进行总结分析,并提出预防改进措施。     

2,4-D Mineralization in soil profiles of a cultivated hummocky landscape in Manitoba,Canada

The objective of this study was to quantify 2,4-D (2,4-dichlorophenoxyacetic acid) mineralization in soil profiles characteristic of hummocky, calcareous-soil landscapes in western Canada. Twenty-five soil cores (8 cm inner diameter, 50 to 125 cm length) were collected along a 360 m transect running west to east in an agricultural field and then segmented by soil-landscape position (upper slopes, mid slopes, lower slopes and depressions) and soil horizon (A, B, and C horizons). In the A horizon, 2,4-D mineralization commenced instantaneously and the mineralization rate followed first-order kinetics. In both the B and C horizons, 2,4-D mineralization only commenced after a lag period of typically 5 to 7 days and the mineralization rate was biphasic. In the A horizon, 2,4-D mineralization parameters including the first-order mineralization rate constant (k ₁), the growth-linked mineralization rate constant (k ₂) and total 2,4-D mineralization at the end of the experiment at 56 days, were most strongly correlated to parameters describing 2,4-D sorption by soil, but were also adequately correlated to soil organic carbon content, soil pH, and carbonate content. In both B and C horizons, there was no significant correlation between 2,4-D mineralization and 2,4-D sorption parameters, and the correlation between soil properties and 2,4-D mineralization parameters was very poor. The k ₁ significantly decreased in sequence of A horizon (0.113% day^?1) > B horizon (0.024% day^?1) = C horizon (0.026% day^?1) and in each soil horizon was greater than k ₂. Total 2,4-D mineralization at 56 days also significantly decreased in sequence of A horizon (42%) > B horizon (31%) = C horizon (27%). In the A horizon, slope position had little influence on k ₁ or k ₂, except that k ₁ was significantly greater in upper slopes (0.170% day^?1) than in lower slopes (0.080% day^?1). Neither k ₁ nor k ₂ was significantly influenced by slope position in the B or C horizons. Total 2,4-D mineralization at 56 days was not influenced by slope positions in any horizon. Our results suggest that, when predicting 2,4-D transport at the field scale, pesticide fate models should consider the strong differences in 2,4-D mineralization between surface and subsurface horizons. This suggests that 2,4-D mineralization is best predicted using a model that has the ability to describe a range of non-linear mineralization curves. We also conclude that the horizontal variations in 2,4-D mineralization at the field scale will be difficult to consider in predictions of 2,4-D transport at the field scale because, within each horizon, 2,4-D mineralization was highly variable across the twenty-five soil cores, and this variability was poorly correlated to soil properties or soil-landscape position.     

Optimising energy recovery and use of chemicals,resources and materials in modern waste-to-energy plants

Due to ongoing developments in the EU waste policy, Waste-to-Energy (WtE) plants are to be optimized beyond current acceptance levels. In this paper, a non-exhaustive overview of advanced technical improvements is presented and illustrated with facts and figures from state-of-the-art combustion plants for municipal solid waste (MSW). Some of the data included originate from regular WtE plant operation – before and after optimisation – as well as from defined plant-scale research. Aspects of energy efficiency and (re-)use of chemicals, resources and materials are discussed and support, in light of best available techniques (BAT), the idea that WtE plant performance still can be improved significantly, without direct need for expensive techniques, tools or re-design. In first instance, diagnostic skills and a thorough understanding of processes and operations allow for reclaiming the silent optimisation potential.     

Predictive models of turbidity and water depth in the Doñana marshes using Landsat TM and ETM+ images

We have used Landsat-5 TM and Landsat-7 ETM+ images together with simultaneous ground-truth data at sample points in the Doñana marshes to predict water turbidity and depth from band reflectance using Generalized Additive Models. We have point samples for 12 different dates simultaneous with 7 Landsat-5 and 5 Landsat-7 overpasses. The best model for water turbidity in the marsh explained 38% of variance in ground-truth data and included as predictors band 3 (630–690 nm), band 5 (1550–1750 nm) and the ratio between bands 1 (450–520 nm) and 4 (760–900 nm). Water turbidity is easier to predict for water bodies like the Guadalquivir River and artificial ponds that are deep and not affected by bottom soil reflectance and aquatic vegetation. For the latter, a simple model using band 3 reflectance explains 78.6% of the variance. Water depth is easier to predict than turbidity. The best model for water depth in the marsh explains 78% of the variance and includes as predictors band 1, band 5, the ratio between band 2 (520–600 nm) and band 4, and bottom soil reflectance in band 4 in September, when the marsh is dry. The water turbidity and water depth models have been developed in order to reconstruct historical changes in Doñana wetlands during the last 30 years using the Landsat satellite images time series.     

加强三峡地区土壤腐蚀环境调查与研究

三峡工程是关系到国计民生的一项特大型工程，必须保证其长期，安全地运行，这就要求对工程中的埋地金属构件进行有效的腐蚀防护，而构件使用寿命的预测及防护方法的筛选又赖于该地区土壤的腐蚀性强弱。本文以三峡坝址土壤的腐蚀性调查与研究为重点，探讨了三峡地区土壤的腐蚀性及其主要影响因子，作者认为，三峡地区土壤的腐蚀性较强，在工程建设中最好先进行土壤腐蚀环境的勘测，并在工程中采用必要的防护方法。     

SnAgCu焊料中Sn元素在模拟土壤溶液中的浸出行为

研究了Sn-3.5Ag-0.75Cu无铅焊料及其与Cu基板的钎焊接头在模拟土壤的NaCl,NaCl-Na2SO4和NaCl-Na2SO4-Na2CO3溶液中Sn元素的浸出行为.结果表明:焊料在NaCl-Na2SO4-Na2CO3溶液中Sn的浸出相对严重;而接头在NaCl溶液中Sn的浸出量最多.在Sn浸出量多的焊料和接头表面形成厚而疏松的腐蚀产物,XRD分析表明其产物主要由SnO,SnO2和Sn4(OH)6Cl2组成.动电位极化测试分析表明接头中Cu基板与焊料合金之间的电偶腐蚀是焊料合金与接头在同种溶液中Sn元素浸出差异的主要原因.     

Transverse approach between real world concentrations of SO2, NO2, BTEX, aldehyde emissions and corrosion in the Grand Mare tunnel

With regard to automotive traffic, a tunnel-type semi enclosed atmosphere is characterized by a higher concentration of gaseous pollutants than on urban traffic roads and highlights the gaseous effluent species having an impact on material degradation. Therefore, a transverse approach between air quality and its consequences upon the longevity of materials is necessary, implying better knowledge of tunnel atmosphere and a better understanding of material degradation inside a tunnel for operating administration. Gaseous pollutant measurements carried out in a road tunnel in Rouen (Normandy) give the real world traffic concentrations of experimental exposure conditions. The sampling campaigns, achieved in summer and winter include SO₂, NO₂, BTEX and aldehyde analyses. Effluent profiles in the upward and downward tubes have been established. The current work shows that SO₂, NO₂, formaldehyde, acetaldehyde, propanal and butanal must be considered in the degradation process of materials in a stuffy environment. As regards NO₂, its concentration depends on the modification of the automotive fleet. The total aldehyde concentrations indicate no particular trend between the two bores. Formaldehyde, acetaldehyde, propanal, butanal and acrolein species are the most abundant species emitted by vehicles and represent 90% to 95% of the total aldehyde emissions.     

塔里木河下游输水间歇地下水埋深及化学组分的变化

基于适时监测资料,对塔里木河下游2006年11月第11次输水停止后地下水埋深和地下水化学特征时空变化进行分析总结,结果发现,塔里木河下游上段地下水埋深自2007年3月～2009年9月呈增加变化,地下水主要离子含量以增加变化为主;中段地下水埋深呈增加变化,但主要离子的含量以下降变化为主要特征;下段地下水埋深从2008年8月起呈减小变化趋势,地下水中主要离子含量随地下水位的上升而增加.在各断面距离输水河道远处,地下水埋深变化首先与断面距离水源地大西海子水库的远近有关,距离大西海子水库较近的英苏断面在输水间歇地下水埋深呈增加变化,但变化幅度不大;喀尔达伊断面地下水埋深在输水间歇以增加变化为主;阿拉干和考干断面地下水埋深在2008年8月以后才开始受到输水的影响,地下水化学特征的变化则表现出较复杂的变化.     

Johnson & Ettinger模型和Volasoil模型在污染物室内挥发风险评价中的应用和比较

在土壤污染和地下水污染的现场,挥发过程是挥发性污染物暴露的重要途径.设置典型土壤污染场景作为研究对象,选取Johnson&Ettinger模型和Volasoil模型进行室内挥发过程的模拟和暴露浓度的计算.对两个模型中污染物的运移机理进行了比较和分析.尽管方法和参数选择有所不同,二者对污染源处三相平衡浓度的计算本质上是一致的.暴露浓度的计算结果表明,两个模型对室内挥发过程的模拟可能会有较大差异,与污染现场的具体情况有关.参数影响的分析表明,污染源顶部埋深对二者暴露浓度的影响一致,Johnson&Ettinger模型对污染土壤含水率的大小非常敏感.建议考虑房屋结构的实际情况,选用或者改进模型进行室内挥发过程的评价.