调控絮体形态强化电絮凝减缓膜污染

本研究通过调节电絮凝工艺参数来实现对絮体形态的调控,进而达到减缓膜污染的目的.主要考察了电流密度、初始pH、初始电导率对絮体性质以及膜通量的影响,并解析了超滤膜对不同形貌结构絮体的膜污染响应机制.结果表明,电絮凝减缓膜污染的关键是在膜表面形成疏松多孔的滤饼层,电絮凝-超滤(electrocoagulation-ultrafiltration,EC-UF)工艺不但能够有效地减缓膜污染,而且还极大提升了出水水质.增加电流密度,以及在pH中性水质条件下,EC-UF工艺中膜通量保持更高.j=20 A·m~(-2)、初始pH=7、初始电导率=1 000μS·cm~(-1),EC-UF工艺对水中的腐殖酸(humic acid,HA)去除率为97%,平衡阶段归一化通量J/J0达到81%.     

超滤的预处理工艺对比研究:化学混凝与电絮凝

对比研究了化学混凝(chemical coagulation,CC)与电絮凝(electrocoagulation,EC)作为超滤膜分离的预处理工艺,在死端过滤条件下与超滤膜的作用机制以及对膜污染的减缓效果.主要研究了Al3+投加量对膜通量、絮体性质(粒径、强度系数、恢复系数、分形维数)、以及滤饼层性质的影响.结果表明,EC作为预处理时,生成的絮体强度大且结构紧实,在膜表面堆积形成的滤饼层具有疏松多孔、亲水性强的性质;而CC作为预处理时,生成的絮体强度低且比较松散,在膜过滤过程中容易被压力压碎压实,导致滤饼层比较密实、亲水性低.因此,EC作为预处理工艺对膜污染的减缓效果好,在运行过程中可以保持较高的膜通量,膜通量较CC高约5.57%.     

碳纳米管改性PVDF中空纤维超滤膜处理二级出水抗污染性能研究

采用碳纳米管改性PVDF中空纤维超滤膜以缓解膜污染.考察了CNTs的乙醇分散液浓度、CNTs尺寸和负载量对改性中空纤维膜的抗污染性能和改性膜内表面CNTs层稳定性的影响,分析了该改性膜对二级出水DOC、UV254的去除效果,并对改性膜出水的荧光特性进行了表征.结果表明,选用体积分数为50%的乙醇分散液、外径为30~50 nm碳纳米管、负载量为3 g·m-2时,制备的改性中空纤维膜CNTs层稳定,抗污染能力显著提高.与未改性膜相比,改性膜对二级出水DOC和UV254的去除率分别提高了37%和56%;且对二级出水中的腐殖类和蛋白质类物质去除能力明显增强.     

两亲性共聚物共混PVDF超滤膜的界面性质与抗蛋白质污染的研究

考察了两亲性共聚物聚氧乙烯/聚氧丙烯/聚氧乙烯[PEO-PPO-PEO(F127)]共混聚偏氟乙烯(PVDF)铸膜液,在水相凝胶浴中的相转化动力学过程.结合衰减全反射傅立叶转变红外光谱(ATR-FTIR)、扫描电子显微镜(SEM)、原子力显微镜(AFM)等表征手段,分析了F127含量在PVDF膜表面的PEO富集率、膜微观形貌及结构参数的影响规律.以静态吸附量、过滤比通量衰减及膜污染阻力模型,评价了F127/PVDF共混膜对牛血清蛋白(BSA)的抗污染性能.结果表明随着F127添加量增大,相转化延迟分相行为增强,膜表面及内部孔径和孔隙率升高,表面粗糙度增大,膜面PEO富集率的增幅在F127含量达15%后趋于稳定.F127含量在15%~25%之间的共混膜有较高的渗透通量和BSA截留率,静态吸附量低,比通量衰减速度慢,不可逆污染指数低,堵孔阻力及滤饼层阻力分布系数小,表现了良好的抗污染性能.     

城市污水二级出水超滤膜污染与膜特性的研究

以城市污水二级出水为过滤介质,考察了PVA、PVP、PMMA等与PVDF的二元及三元共混超滤膜的过滤污染行为.结果表明,共混优化了PVDF超滤膜的结构参数,添加剂PVP、PVA可有效改善膜的亲水化程度,提高膜渗透通量.超滤膜的亲水性和结构特性对膜抗污染性能影响较大;堵孔阻力是二级出水过滤膜污染不可逆的主要原因.亲水性较强的超滤膜,二级出水过滤初期易因浓差极化而导致滤饼层污染,造成一定的通量衰减,但易清洗恢复,不可逆污染指数(rir)为0,抗污染性能好.致密的超滤膜表面有利于防止二级出水中的中低分子量污染物进入膜内部,而断面通透大孔和疏松海绵层结构的超滤膜,能减少二级出水中的污染物在膜中沉积形成堵孔阻力.膜表面多孔,内部大孔发育不充分,易形成堵孔污染,通量衰减大且不易清洗恢复,膜污染不可逆.     

预处理＋超滤技术处理饮用水

在查阅了大量的国内外文献资料基础上，主要介绍了超滤技术及预处理应用于饮用水净化的研究。尽管超滤是一种去除病原微生物（病原菌、病毒和病原原生动物）有效的消毒工艺，但因它的截留分子量比较高，去除天然有机物相对无效。试验证明，适当的预处理可使超滤膜不仅能去除天然水中大量颗粒状物质，同时也可去除溶解性有机物及THMFP。     

Development of clean technology in alcohol fermentation industry

A zero-discharge system for the alcohol fermentation industry was developed by recycling distillery waste (stillage). Stillage was able to be recycled as cooking water for the next fermentation after treating it with appropriate separation processes. Ultrafiltration with a ceramic membrane played a key role in the separation processes. When the permeate from the ultrafiltration of stillage was recycled to the cooking step, the total fermentation time was prolonged from 60 to 70–80 h, but the average ethanol production yield (8.8%) was similar to that in the conventional process (9.0%). In contrast, direct recycle of stillage without membrane filtration showed negative effects on both fermentation time and alcohol yield as recycling was repeated. This new process was confirmed to have stable operation over eight recycles. This new clean technology for the ethanol production industry makes it possible to eliminate the stillage treatment steps using the conventional biological treatment processes such as anaerobic digestion and activated sludge steps currently being operated in industry.     

浅谈太阳能电池生产用超纯水的工程设计

宜兴某太阳能电池生产厂以市政自来水作为太阳能电池生产用的纯水水源，该工程以超滤( UF )、反渗透( RO)和电除盐( EDI)的全膜法工艺为主，投产运行3年的结果表明，系统性能稳定，出水水质大大优于太阳能电池生产用水水质标准，可达到超纯水水质标准。     

Effects of a dynamic membrane formed with polyethylene glycol on the ultrafiltration of natural organic matter

The formation of a dynamic membrane (DM) was investigated using polyethylene glycol (PEG) (molecular weight of 35000 g/mol, concentration of 1 g/L). Two natural organic matters (NOM), Dongbok Lake NOM (DLNOM) and Suwannee River NOM (SRNOM) were used in the ultrafiltration experiments along with PEG. To evaluate the effects of the DM with PEG on ultrafiltration, various transport experiments were conducted, and the analyses of the NOM in the membrane feed and permeate were performed using high performance size exclusion chromatography, and the effective pore size distribution (effective PSD) and effective molecular weight cut off (effective MWCO) were determined. The advantages of DM formed with PEG can be summarized as follows: (1) PEG interferes with NOM transmission through the ultrafiltration membrane pores by increasing the retention coefficient of NOM in UF membranes, and (2) low removal of NOM by the DM is affected by external factors, such as pressure increases during UF membrane filtration, which decreases the effective PSD and effective MWCO of UF membranes. However, a disadvantage of the DM with PEG was severe flux decline; thus, one must be mindful of both the positive and negative influences of the DM when optimizing the UF performance of the membrane.     

外置式超滤膜生物反应器处理油田废水

采用外置式超滤膜生物反应器处理油田废水,废水中的有机物被生物接触氧化池填料上形成生物膜的微生物降解,然后通过中空纤维超滤膜进行过滤,出水中油的质量浓度在1m g/L以下,悬浮物的质量浓度在3m g/L以下。考察了细菌的筛选、生物膜的培养驯化及压力、温度等对膜通量的影响。实验结果表明,筛选出的3株高效原油降解菌有很好的除油效果;生物膜经培养驯化成熟后,生物接触氧化池内细菌浓度为1×106个/mL;膜通量随压力和温度的适当提高而增加,适宜的操作压力为0.08M Pa,温度为20~28℃。分别用超滤水反冲洗、稀碱、稀酸、杀菌剂(如N aC lO溶液)和清水冲洗被污染的超滤膜,可使膜通量恢复到新膜的98%以上;在生物除油工序后增加沉淀池,膜污染可减少约7.77%。