碳源对O/A-F/F模式积累内源聚合物及反硝化的影响

好氧/缺氧-盛宴/饥饿(O/A-F/F)选择模式能够在好氧段实现活性污泥积累内源聚合物的同时在缺氧段原位利用内源聚合物驱动反硝化.为了深入探究不同的碳源类型对O/A-F/F模式下内源聚合物积累和内源反硝化的影响,实验以乙酸和葡萄糖为主要碳源探究内源聚合物积累和内源反硝化特性以及富集的活性污泥菌群的结构和功能.结果表明,在O/A-F/F选择模式下,当进水化学需氧量(COD)为500 mg·L~(-1)左右时,以乙酸为主要碳源系统(Ac-SBR)和以葡萄糖为主要碳源的系统(Gc-SBR)均能实现40 mg·L~(-1)的硝酸盐氮的内源去除,且各系统均实现了部分短程反硝化.但Ac-SBR实现了更高的亚硝酸盐的积累.乙酸有利于内源聚羟基脂肪酸酯(PHA)积累并驱动内源反硝化过程,PHA产率为0.52,平均反硝化速率(DNR)为9.65 mg·(L·h)-1.Gc-SBR系统能够实现PHA和糖原(Gly)的同时积累,但Gly产率高于PHA产率,分别为0.36和0.17,DNR为4.35 mg·(L·h)-1.Gly是实现内源反硝化过程的主要驱动力,反硝化脱氮贡献率占总量的77%.16S rRNA高通量测序表明Proteobacteria门中的β-Proteobacteria在Ac-SBR中为优势菌纲,菌群丰度为40.56%,而在Gc-SBR中菌群丰度为18.05%.α-Proteobacteria可能在Gc-SBR中贡献了微生物的糖原积累.β-Proteobacteria、Unclassified Bacteroidetes和Lgnavibacteria在Ac-SBR中贡献了内源PHA积累.     

高分子吸水树脂作为蓄冷材料的性能研究

本文研究了不同吸水倍率的高分子吸水树脂的相变温度、相变潜热及作为蓄冷材料在35℃环境下的相变时间,并与冰做了对比。结果显示：吸收不同倍率水的高分子树脂。相变温度和相变潜热基本与水相似,随着吸水倍率的增加,相变潜热越接近于水的潜热;在相同条件下放置于隔冷袋中的高分子吸水树脂．在35℃高温环境中,可以维持20℃以下低温5h,比冰多了将近1h,克服了渗漏的缺点,在蓄冷领域表现出了明显的优势。     

聚合物涂层纤维材料为固定相填充毛细管气相色谱及其在样品预处理中的应用

1　IntroductionGaschromatography(GC)isoneofthemostpopularseparationmethodsfortheanalysisofvolatilecompounds,andawidevarietyofpolymericmaterialsasthestationaryphases,havebeendeveloped .Incontrasttothesuccessfulapplicationsandsubsequentcommercializationofth…     

Contribution of Pendant Ester Group Hydrolysis to the Erosion of Acrylic Polymers in Binders Aimed at Organotin-Free Antifouling Paints

Specific polymeric material applications as bioactive molecules delivery systems involve a strictly controlled degradation of polymer matrixes. One possibility to obtain a zero-order kinetic for small molecules release consists in a simple hydrolysis of ester groups contained in the macromolecular structure. The chemical degradation can lead to the continuous surface erosion of the formulated resins without loss of their mechanical properties and to a permanent activity of the delivery systems. Hydrolysis is a very well-known reaction in the case of organic molecules containing ester groups. The mechanism seems to be more complicated when ester groups are located in macromolecular structures. With the aim of antifouling applications, acrylic acid polymers bearing lateral ester groups of different chemical structures (hydrophilic, hydrophobic, hydrolyzable) have been prepared, characterized, and immersed in water, at pH 8, and their hydrolysis has been studied. Experimental data display two parameters, at least, which must be taken into account: the reactivity of the ester groups toward hydrolysis and the hydrophilic/hydrophobic balance of the polymer. The susceptibility of the acrylic polymers to hydrolysis has been compared to the erosion characteristics of the corresponding films. The results confirm that hydrolysis is necessary to obtain a regular degradation of the films without loss of mechanical properties. A relationship has been observed between the characteristics of hydrolysis and erosion for each studied polymer.     

A straightforward synthesis in aqueous medium of enantiomerically enriched S(-)2,2′-dihydroxy-1,1′-binaphthyl

Chiral, atropisomeric 2,2'-dihydroxy-1,1'-binaphthyl has been extensively used to direct asymmetric processes. Its key role in asymmetric catalysis has spurred efforts to synthesize it in the optically pure form, but the reported synthetic routes have a significant environmental impact. In an aqueous peroxydase-cyclodextrin system the oxidative coupling of 2-naphthol took place very rapidly in almost quantitative yield and resulted in an enantiomeric excess. This one-pot synthesis do not require any organic solvents and oxidising metal cations.     

Relation between extracellular polymers' composition and its ability to complex Cd,Cu and Pb

Activated sludges originated from wastewater treatment plants (WWTPs) play an important role in heavy metal removal from effluents. Extracellular polymers (ECP) form a major part of the activated sludge and are heavily involved in biosorption of heavy metals. The complexation of three heavy metals (Cd, Cu and Pb) with ECP extracted from six activated sludges, originated from different WWTPs, was investigated at pH 7.

ECP in the study were shown to be mainly composed of proteins, humic acids, uronic acids and polysaccharides along with smaller amounts of lipids and nucleic acids. IR spectra confirmed the presence of the functional groups usually found in the ECP and the content in each fraction was determined using colorimetric methods. The determination of surface charge was carried out on each ECP sample and allowed two pK_a values characteristic of two distinctive functional groups to be determined. At the pH used in the study, the value of these constants indicates that only one functional group is under protonated form.

A polarographic method was used to determine the complexation parameters (number of binding sites and complexation constant) of ECP solutions towards metals. The following orders were established for the number of binding sites: Cu > Pb  Cd and for the stability of the ECP–metal complex: Cd > Pb  Cu.

A matrix of correlation between the composition of the polymers and the complexation parameters showed that the number of binding sites and the complexation constant were strongly linked to proteins, polysaccharides and humic substances content.     

Ⅰ Ⅱ-ASBR中厌氧颗粒污泥的微生物组成及特性

在35℃下以奶粉人工合成废水为底物连续运行了两段厌氧反应器(ⅠⅡ-ASBR),且于ⅠⅡ两柱中形成了两种不同的厌氧颗粒污泥,为了解厌氧颗粒污泥的微生态结构及生物学特性,对ⅠⅡ两柱中厌氧颗粒污泥的形态及微生物组成进行扫描电镜观察,并测定了其不同基质中的比产甲烷活性、辅酶F420和胞外多聚物的含量。结果表明:ⅠⅡ-ASBR反应器ⅠⅡ两柱中厌氧颗粒污泥形态及微生物组成差异明显,Ⅰ柱的厌氧颗粒污泥大而密实,Ⅱ柱的较小,呈多孔的网状结构,Ⅰ柱中厌氧颗粒污泥以甲烷八叠球菌、球菌及短杆菌为主,丝状菌较少,Ⅱ柱则以丝状菌、短杆菌为主,球菌较少;Ⅰ柱颗粒污泥利用葡萄糖、甲酸、丙酸的产甲烷活性较高,利用乙酸的活性相对较低,Ⅱ柱颗粒污泥利用葡萄糖、乙酸的产甲烷活性较高,而利用甲酸、丙酸的产甲烷活性较低;辅酶F420的含量Ⅱ柱比Ⅰ柱明显要高,而胞外多聚物含量Ⅰ柱比Ⅱ柱的高。     

环糊精在土壤有机污染物治理中的应用

综述了环糊精及其衍生物在土壤弱极性有机物治理中的应用和原理。环糊精可与土壤中弱极性有机污染物形成主客包合物,从而增加其水溶性促进其从土壤中解吸去除;能够同时去除金属离子;能够改变有机污染物理化性质促进其光解;可降低有机污染物毒性促进其微生物降解。     

Cu(Ⅱ)印迹[CTS/PVP]和[CTS/PVP/C]材料的制备及表征

以壳聚糖(CTS)、聚乙烯吡咯烷酮(PVP)、活性炭(C)为基材,Cu(Ⅱ)为印迹离子,制备了CTS/PVP共混印迹球[Cu(Ⅱ)-IICP]和CTS/PVP/C共混印迹球[Cu(Ⅱ)-IICPC].以Cu(Ⅱ)的吸附量作为评价指标,对两种共混印迹球的制备条件进行了优化.研究结果表明,当CTS/PVP的质量比为6∶4,活性炭质量分数为0.6%,Cu(Ⅱ)模板剂质量分数为0.05%,所制备的两种共混印迹球吸附性能较佳,且对Cu(Ⅱ)有较好的选择吸附性.物理吸附分析结果表明,与未印迹相比印迹材料的比表面积明显增大.FTIR谱图分析,Cu(Ⅱ)模板主要与CTS和PVP中的—NH2和—OH发生了配位作用.XRD谱图分析结果表明,CTS与PVP、C、Cu(Ⅱ)之间发生了相互作用,改变了CTS原有的晶体结构,使其结晶度降低.     

新型环糊精聚合物对Zn2+的吸附研究

以β-环糊精(β-CD)和聚酰胺-胺(PAMAM)为原料,合成了新型环糊精聚合物(PAMAM-CD),并用元素分析、扫描电镜(SEM)和傅里叶红外光谱(FT-IR)对其进行了表征.提出了PAMAM-CD与Zn2+最可能的5种配位方式,研究了PAMAM-CD对Zn2+的吸附动力学及等温吸附特性.结果表明:吸附平衡时间为300min,最佳pH值为5~6.5,吸附量达0.78mmol/g.吸附过程符合伪二级动力学模型,速率控制步骤为粒内扩散控制,吸附等温线符合Freundlich模型.在288,298,303,308K时,ΔG分别为-2.139,-2.417,-2.188和-2.218 kJ/mol,表明PAMAM-CD对Zn2+的吸附是一个自发过程.