不同条件下进行渗后扩散的铝硅涂层氧化行为研究

目的提高铝硅涂层的抗氧化性能。方法采用料浆法在DZ417G定向凝固镍基高温合金叶片的燃气流道表面制备铝硅防护涂层,通过扫描电子显微镜(SEM)分析不同条件下进行渗后扩散的铝硅涂层表面显微组织形貌和截面显微组织形貌。结果无保护气氛下进行渗后扩散处理的铝硅涂层,在扩散过程中就已经发生了氧化,氧化过程首先形成多孔非致密结构的θ-Al_2O_3相,随着氧化过程的进行,θ-Al_2O_3相逐渐转变成致密结构的α-Al_2O_3相,从而起到真正的抗氧化作用。结论铝硅涂层中的Al元素提前被消耗,对铝硅涂层的使用寿命存在一定影响,因而渗后扩散须保证在真空条件下或有保护气氛条件下进行,使叶片表面渗后的铝浓度达到一定的要求,从而在使用过程中可以生成致密结构的α-Al_2O_3相,起到抗氧化作用,提高叶片的使用寿命。     

油田用钨合金镀层腐蚀性能评价研究

目的评价钨合金镀层油管的腐蚀性能。方法利用高压釜模拟高压气井和高含硫气井的腐蚀环境,进行高压高温腐蚀试验,以及标准的氢致开裂(HIC)和硫化氢应力腐蚀试验。采用电子扫描显微镜(SEM)及其能谱仪(EDS)和X射线衍射分析仪(XRD),分析或检测钨合金镀层和基管的腐蚀形貌、腐蚀产物的组成。结果油管表面的钨合金镀层平整而致密,其主要组成元素为W和Ni。高温高压腐蚀试验后,镀层仍然致密平整,腐蚀程度轻微。在60、90、120、140℃试验7天时,镀层和基材的H_2S/CO_2腐蚀速率分别为0.0179、0.0093、0.0102、0.0369 mm/a和1.030、1.272、1.183、0.991 mm/a。试验30天,在120℃时,其H_2S/CO_2腐蚀速率分别为-0.0085、0.1789 mm/a;在160℃时,其CO_2腐蚀速率分别为0.0091、0.8976 mm/a。该钨合金镀层均通过了标准的氢致开裂和硫化氢应力腐蚀试验。结论该钨合金镀层具有很好的耐腐蚀性能。     

海滨核电建造期可剥涂层的临时防护性能研究

目的 考察可剥涂层在海洋大气环境下的大型工程建造中的临时防护作用。方法 对来自两个厂家的可剥涂层进行了为期12周的耐候性试验,对可剥涂层在不锈钢及碳钢/环氧两种基底上的可剥离性、防护性和氟氯残留量进行了测试。结果 两个厂家的涂层在外观、耐蚀性、附着力等方面的试验结果没有明显差异,涂层的剥离强度均低于0.05 kN/m,涂层剥离后不锈钢表面的氟氯离子残留量远低于15 ?g/dm2,试验周期内环氧漆色差变化较小。结论 两个厂家的可剥涂层在光泽、硬度和剥离强度等测试方面的结果上存在差异,但对环氧漆均有着较好的防护作用,试验期内剥离性良好,且无有害化学元素残留,具有较高的工程应用价值。     

Investigation on Fe, Mn, Zn, Cu, Pb and Cd fractions in the natural surface coating samples and surficial sediments in the Songhua River, China

Natural surface coating samples （NSCSs） from the surface of shingles and surficial sediments （SSs） in the Songhua River, China were employed to investigate the relationship between NSCSs and SSs in fractions of heavy metals （Fe, Mn, Zn, Cu, Pb, and Cd） using the modified sequential extraction procedure （MSEP）. The results show that the differences between NSCSs and SSs in Fe fi＇actions were insignificant and Fe was dominantly present as residual phase （76.22% for NSCSs and 80.88% for SSs） and Fe-oxides phase （20.33% for NSCSs and 16.15% for SSs）. Significant variation of Mn distribution patterns between NSCSs and SSs was observed with Mn in NSCSs mainly present in Mn-oxides phase （48.27%） and that in SSs present as residual phase （45.44%）. Zn, Cu, Pb and Cd were found dominantly in residual fractions （〉48%）, and next in solid oxides/hydroxides for Zn, Pb and Cd and in easily oxidizable solids/compounds form for Cu, respectively. The heavy metal distribution patterns implied that Fe/Mn oxides both in NSCSs and SSs were more important sinks for binding and adsorption of Zn, Pb and Cd than organic matter （OM）, and inversely, higher affinity of Cu to OM than Fe/Mn oxides in NSCSs and SSs was obtained. Meanwhile, it was found that the distributions of heavy metals in NSCSs and SSs were similar to each other and the pseudo-total concentrations of Zn, Cu, Pb and Cd in NSCSs were greater than those in SSs, highlighting the more importance for NSCSs than SSs in controlling behaviours of heavy metals in aquatic environments.     

在役管道防腐层的失效与维修

介绍了管道防腐层失效的原因和方式,指出水和氧气是防腐层失效的原因,含水量和含氧量决定腐蚀程度,提出对防腐层及时检查与修复等措施.     

南京及邻近地区新近沉积土的动剪切模量和阻尼比的试验研究

通过对南京及其邻近地区漫滩相成因的粘土、粉质粘土、淤泥质粉质粘土、粉质粘土与粉砂互层土、粉土、粉细砂等 6类新近沉积土的自振柱试验 ,详细探讨了围压大小、剪应变水平、土的颗粒组成和结构性对这 6类新近沉积土的剪切模量G及阻尼比λ的影响。通过与Seed和Idriss建议的砂土G/Gmax～γ和λ～γ曲线变化范围的对比 ,结果表明 ,不能将粉质粘土与粉砂互层土简单地当作砂土或粉质粘土对待。通过试验和理论分析 ,给出了南京及其邻近地区 6类新近沉积土动剪切模量和阻尼比随剪应变变化的平均曲线的拟合曲线、包络线及其参数的推荐值 ,对实际工程具有一定的借鉴作用     

沥青涂层对桩侧摩阻力影响的试验研究

采用改进直剪仪模拟桩与土之间的滑动摩擦,研究了沥青涂层对桩侧摩阻力的影响。试验结果表明,桩侧摩阻力与土的类型、法向应力有关,随着法向应力的增长,滑动摩阻力也相应增长,且增长近似呈线性关系;在一定的法向应力下,沥青涂层对减小滑动摩阻力有一定的作用,随着法向应力的增长,沥青涂层亦会导致滑动摩阻力增加。     

两地区涂层板自然老化和评价方法的比较

将不同颜色(红色、海蓝、白灰)的三种涂层板分别置于热带乡村气候区和热带海洋气候区进行大气暴露5年,每年对样品进行外观评估、颜色和光泽测量;收集相关气象数据,比较两地区涂层老化的差异;建立涂层板老化曲线模型,比较不同评估方式,得出光泽和色差模型可以反映材料的老化过程。     

MB1870型球磨机噪声治理

球磨机运转时噪声很大,不仅生产操作时工人难以承受,而且对周围居民的生活环境造成严重污染.我们采用约束型粘弹阻尼结构减震,并结合吸声、隔声和消声技术进行综合治理,取得了良好的降噪效果.     

Virus retention and transport through Al-oxide coated sand columns: effects of ionic strength and composition

Knowledge of the factors that influence the fate and transport of viruses in porous media is very important for accurately determining groundwater vulnerability and for developing protective regulations. In this study, six saturated sand column experiments were performed to examine the effects of a positively charged Al-oxide, which was coated on sand particles, on the retention and transport of viruses (phiX174 and MS-2) in background solutions of different ionic strength and composition. We found that the Al-oxide coating on sand significantly removed viruses during their transport in a phosphate buffered saline (PBS) solution. Mass balance calculations showed that 34% of the input MS-2 was inactivated/irreversibly sorbed on the surface of Al-oxide coated sand whereas 100% of phiX174 was recovered. Results from this study also indicated that higher ionic strength facilitated the transport of both phiX174 and MS-2 through the Al-oxide coated sand. This was attributed to the effect of ion shielding, which at higher ionic strength decreased the electrostatic attraction between the viral particles and the sand surface and consequently decreased virus sorption. Strong effect of the ionic strength indicates that an outer-sphere complexation mechanism was responsible for the virus sorption on the Al-oxide coated sand. Ion composition of the background solutions was also found to be a significant factor in influencing virus retention and transport. Virus transport was enhanced in the presence of phosphate (HPO(4)(2-)) as compared to bicarbonate (HCO(3)(-)), and the effect of HPO(4)(2-) was more significant on MS-2 than on phiX174. The presence of bivalent cations (Ca(2+) and Mg(2+)) increased virus transport because the cations partially screened the negative charges on the viruses therefore decreased the electrostatic attraction between the positively charged sand surface and the negatively charged viruses. Mass recovery data indicated that bivalent cations gave rise to a certain degree of inactivation/irreversibly sorption of phiX174 on the surface of Al-oxide coated sand. On the contrary, the bivalent cations appeared to have protected MS-2 from inactivation/irreversibly sorption. This study provides some insights into the mechanisms responsible for virus retention and transport in porous media.