Ce-MCM-22分子筛的合成与吸附动力学研究

采用静态水热晶化法,以硅溶胶为硅源、六亚甲基亚胺(HMI)为模板剂,通过掺杂Ce合成了具有MWW层状结构的Ce-MCM-22分子筛。并利用粉末X-射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)等方法对其进行了表征,对其进行了吸附动力学的研究。研究表明,Ce-MCM-22吸附动力方程拟一级方程为y=-0.028 1x-0.136,R2=0.983 4。Ce-MCM-22吸附动力方程拟二级方程为y=0.465 7x+1.2005,R2=0.999 5,说明拟二级反应模型更能真实地反映分子筛吸附亚甲蓝溶液的反应机理。     

厌氧氨氧化电子受体的研究

在无机条件下,以该课题组已经培养出来的厌氧氨氧化污泥作为接种污泥,分别以硫酸盐、硝酸盐和亚硝酸盐为电子受体来研究氨的氧化反应。从去除速率的角度来看,以NO2--N、NO3--N和SO42--S为电子受体的反应器,分别在运行的第24.5天、40天和31天时达到0.030 0 kg/(m.3d)NH4+-N去除速率,则氧化氨的能力由大到小依次是:亚硝酸盐>硫酸盐>硝酸盐;从标准吉布斯自由能变化来看,3种反应都是可以发生的;以亚硝酸盐为电子受体的反应过程是一个消耗酸度的生物过程,而以硫酸盐为电子受体的反应过程是一个消耗碱度的生物过程。     

不同能量电子辐照下星用瑞侃导线性能退化研究

目的研究卫星上外露导线在空间辐射环境下的耐受能力。方法通过分析GEO轨道下在轨10年航天器外露瑞侃导线的辐照环境,研究低能和高能电子对导线性能的影响,地面模拟试验参数选择能量分别为45 keV和1 MeV,注量率均为8.3×10^10 e/(cm^2·s),总注量均为2×10^16 e/cm^2。考察瑞侃导线力学性能(断裂伸长率、拉伸强度)和电性能(击穿电压)的退化情况,并用XPS和SEM测试分析手段,对其电子辐照损伤机理进行研究。结果在不同能量电子辐照下,瑞侃导线的力学性能均略有下降,没有显著区别,而电学性能严重退化,且低能电子较高能电子对其电学性能影响更为严重,其击穿电压分别下降了100%和50%。结论通过剂量-深度分布计算,45 keV入射电子能量全部沉积在样品表层下数微米的深度范围内,完全被导线外皮吸收,对样品的损伤较大;而1 MeV入射电子能量绝大部分穿透表皮沉积在样品铜芯中,因而其性能退化情况相对低能电子较小。进一步的,通过SEM和XPS测试和分析发现,电子辐照造成瑞侃导线分子链降解,形成自由基以及气体,自由基的再交联是造成瑞侃导线损伤的重要机理。     

不同制备温度的水稻生物炭电子交换能力研究

为探究不同热解温度下生物炭的电子交换能力,通过限氧升温炭化法,利用水稻秸秆在不同热解温度条件下制备生物炭,与氧气、铁氰化钾氧化剂和柠檬酸钛还原剂进行氧化还原反应,对生物炭的得电子能力（EAC）和失电子能力（EDC）进行定量分析.结果显示,热解温度对生物炭的电子交换能力有较大影响,随热解温度升高至500℃时,生物炭的EAC和EDC达到最大,分别为3.86,1.72mmol/g高于500℃后,随着温度的增加,EAC和EDC逐渐减小,这是由于生物炭的醌类和酚类官能团的结构改变以及持久性自由基强度变化的联合作用.此外,柠檬酸钛和连二硫酸钠两种氧化还原电位不同的还原剂进一步证实了还原剂电位对生物炭EAC的影响.且生物炭具有氧化还原的可逆性,可逆的EAC与EDC之和近似等于生物炭的电子储存能力.     

Morphology, composition, and sources of individual aerosol particles at a regional background site of the YRD, China

Aerosol samples were collected at Lin'an, a background site of Yangtze River Delta(YRD).Morphology, size, composition, and mixing state of individual aerosol particles were characterized by transmission electron microscopy(TEM) coupled with energy dispersive X-ray spectroscopy(EDS), and the soluble ions of PM_(1.0) were studied by aerosol mass spectrometer(AMS). The daily average AMS mass concentrations of sulfate, nitrate, and ammonium were about 5.8, 8.6, and 5.6 μg/m~3, respectively. Individual aerosol particles were classified into seven types: S-rich, K-rich, organic matter(OM), soot, fly ash, metal, and mineral. S-rich particles were dominant in all size bins, and 51%(by number) of S-rich particles were internally mixed with other particles. The fraction of organic coating particles was 13.7% in morning, 25.2% in afternoon, and 11% in evening, suggesting that the strong photochemical process during afternoon produced more secondary organic aerosols(SOA) on the surface of inorganic particles. Fly ash and metal particles were abundant during the day, suggesting the influence of emissions from coal-fired power plants and steel plants. The results indicate that the intense industrial emissions in the YRD significantly transported to the background areas. PM_(2.5) concentration may be lower in background air than in urban air but complex mixing state of aerosol particles indicates that the long-range transported particles substantially influenced the background air quality.     

电子束辐照降解水体中的金霉素

应用电子加速器辐照研究了去除水体中金霉素（30mg/L）的过程,初步探索了剂量、不同气氛条件下叔丁醇的存在、pH值、无机阴离子等对去除效率的影响.然后根据实验结果推测了降解机理和降解产物毒性.结果表明：电子束辐照能高效去除水体中的金霉素,且还原性粒子占主导作用;pH值为碱性时利于金霉素的去除;0.005mol/LCO₃^2-、SO₄^2-、NO₃^-或Cl^-的存在能促进其去除.根据超高效液相色谱-质谱（UHPLC-MS）对降解产物的分析,并结合理论计算推测出10种降解产物和相应的降解途径.之后的费氏弧菌毒理实验数据显示：降解后水样的生物毒性随着吸收剂量先增高后缓慢降低,但辐照5.0kGy后毒性依然较大.     

热障涂层对DD6单晶高温合金高周疲劳性能的影响

目的研究电子束物理气相沉积热障涂层对单晶高温合金高周疲劳性能的影响,为热障涂层在涡轮叶片上的应用提供技术支持。方法采用真空电弧镀和电子束物理气相沉积工艺制备YSZ热障涂层,进行900℃条件下高周疲劳性能测试,采用扫描电镜对测试后的试样表面、断口形貌进行观察与分析。结果在900℃、380 MPa条件下,带涂层的DD6单晶试棒循环次数(Nf)超过了107,420 MPa条件下超过了106。通过对DD6单晶试棒断口分析,失效后的带涂层试棒仍以DD6单晶常见滑移解离形式发生破坏。结论高周疲劳性能测试条件下,带YSZ热障涂层的试棒中粘结层率先产生垂直微裂纹,但是裂纹扩展延伸中发生氧化钝化,之后DD6基体沿正常的滑移方向从表面向内部疲劳扩展,带涂层的试棒疲劳裂纹并非由涂层微裂纹直接扩展形成,热障涂层对DD6单晶高温合金高周疲劳性能影响较小。     

电子束物理气相沉积制备热障涂层研究进展

介绍了电子束物理气相沉积设备的主要组成、工作原理和电子束物理气相沉积热障涂层的结构特点,并重点论述了工件转速、工件温度、靶材蒸汽入射角度、工件表面的粗糙度、粘结层预氧化、改性粘结层和双层陶瓷层等对电子束物理气相沉积热障涂层性能的影响。     

Reaction pathways of dimethyl phthalate degradation in TiO2-UV-O2 and TiO2-UV-Fe(VI) systems

The photocatalytic degradation of dimethyl phthalate (DMP) in aqueous TiO₂ suspension under UV illumination has been investigated using oxygen (O₂) and ferrate (Fe(VI)) as electron acceptors. The experiments demonstrated that Fe(VI) was a more effective electron acceptor than O₂ for scavenging the conduction band electrons from the surface of the catalyst. Some major intermediate products from DMP degradation were identified by HPLC and GC/MS analyses. The analytical results identified dimethyl 3-hydroxyphthalate and dimethyl 2-hydroxyphthalate as the two main intermediate products from the DMP degradation in the TiO₂–UV–O₂ system, while in contrast phthalic acid was found to be the main intermediate product in the TiO₂–UV–Fe(VI) system. These findings indicate that DMP degradation in the TiO₂–UV–O₂ and TiO₂–UV–Fe(VI) systems followed different reaction pathways. An electron spin resonance analysis confirmed that hydroxyl radicals existed in the TiO₂–UV–O₂ reaction system and an unknown radical species (most likely an iron–oxo species) is suspected to exist in the TiO₂–UV–Fe(VI) reaction system. Two pathway schemes of DMP degradation in the TiO₂–UV–O₂ and TiO₂–UV–Fe(VI) reaction systems are proposed. It is believed that the radicals formed in the TiO₂–UV–O₂ reaction system preferably attack the aromatic ring of the DMP, while in contrast the radicals formed in the TiO₂–UV–Fe(VI) reaction systems attack the alkyl chain of DMP.     

Fe-Mn-Ni-Si四元合金中辐照缺陷对辐照硬化的贡献

目的 研究Fe-Mn-Ni-Si四元合金在350℃下受到离子辐照后产生的辐照缺陷对于辐照硬化的贡献.方法 对辐照前后样品进行纳米压痕测试,获得硬度增量来衡量辐照硬化;再通过三维原子探针及透射电镜等表征手段,获得样品辐照后产生的团簇的数量密度、体积分数、团簇尺寸、位错环密度、位错环尺寸大小等微观结构信息;结合Disper...