介质阻挡放电降解环境污染物CF2ClBr的等离子体系电子密度

在利用介质阻挡放电对污染物质ＣＦ２ＣｌＢｒ进行等离子体降解产物分析的基础上,进一步研究等离子体系中的电子密度。采用动态反应装置,以平行板电极法直接测量。在ＣＦ２ＣｌＢｒ的压力为２ｋＰａ时,得出该实验条件下的电子密度约为５．０×１０＾１３／ｍ＾３。     

榆林地区植被时空分异特征及其影响因素研究

植被作为反映陆地生态系统和气候的重要指标,对研究全球或区域生态环境变化具有重要作用。以地处黄土高原生态脆弱区的榆林市为研究区,基于地理探测器模型,选取坡向、坡度、气温、降水和土壤类型5类自然因子,土地利用类型、人口密度和GDP 3类人文因子,分析榆林地区植被空间分异特征及其驱动力,并揭示了促进植被生长影响因子的最适宜特征。结果表明,（1）研究区2000—2018年植被覆盖趋向改善,NDVI呈现增加趋势,增速为0.11/10a,2008年以后植被增长较为明显;NDVI在2018年中高等级（0.6—0.8）面积比2000年中高等级面积明显增加;中高等级集中于榆林市东部黄土丘陵区,中低等级（0.2—0.4）集中于榆林市西北部的风沙区,植被覆盖呈现东部高西北低的空间分布特征。（2）人口密度和气温因子较好地解释植被NDVI空间分异性,是影响NDVI空间分异性的主要因子,GDP、土地利用类型和坡度是次级影响因子,其他因子对NDVI空间分异存在间接影响;坡向、降水和土壤类型因子与其他自然、人文因素对植被空间分布影响存在显著性差异。（3）自然、人文因子对榆林市NDVI的影响存在交互作用,因子之间的交互...     

The Characterisation of Settled Dust by Scanning Electron Microscopy and Energy Dispersive X-ray Analysis

Settled dust has been collected inside the main foyers ofthree University buildings in Wolverhampton City Centre,U.K. Two of the three buildings are located in a streetcanyon used almost exclusively by heavy duty dieselvehicles. The dust was collected on adhesive carbonspectro-tabs to be in a form suitable for analysis byscanning electron microscope and energy dispersive X-rayanalysis. Using these analytical techniques, individualparticle analysis was undertaken for morphology andchemistry. Seasonal variations and variations due tolocation were observed in both the morphologicalmeasurements and chemical analysis. Many of the differencesappear attributable to the influence of road traffic, inparticular, the heavy duty diesel vehicles, travellingalong the street canyon.     

电子束辐照降解水中氯霉素的研究

本研究对氯霉素(CAP)在不同条件下的电子束辐照降解进行了研究.结果表明,电子束辐照可有效去除水中CAP,低浓度CAP在酸性条件下的辐照降解更为显著,且降解过程符合准一级动力学模型.通过添加不同的自由基清除剂,发现HO·在CAP降解中起关键作用,此外,CAP分子也会吸收辐照而发生分解.水中共存的阴离子和腐殖酸(HA)对CAP辐照降解均有抑制作用,这跟其与HO·的反应速率常数大小有关,并且反应速率越大,其抑制能力越强.CAP在去离子水中的去除率高于其他实际水体,但辐照剂量为4 k Gy时,污水厂污水过滤水和胶体浓缩液中的CAP也可分别去除89.1%和81.7%.利用GC-MS检测到辐照后溶液中有6种中间产物,主要是通过脱水、不对称中心断键和脱酰胺作用形成.此外,IC检测有Cl-、NO-3和NO-2的产生,并且TOC在一定程度上降低,说明部分CAP被矿化.     

Integrated energy view of wastewater treatment: A potential of electrochemical biodegradation

• Energy is needed to accelerate the biological wastewater treatment. • Electrical energy input in traditional technology is indirect and inefficient. • Direct injection of electricity can be a game changer to maximize energy efficiency. • Microbial electrochemical unit for decentralized wastewater treatment is proposed. It has been more than one century since the activated sludge process was invented. Despite its proven stability and reliability, the energy (especially the electrical energy) use in wastewater treatment should evolve to meet the increasingly urgent demand of energy efficiency. This paper discusses how the energy utilized in conventional biological wastewater treatment can be altered by switching the indirect energy input to a direct electricity injection, which is achieved by the electrode integration providing extra thermodynamic driving force to biodegradation. By using electrodes instead of oxygen as terminal electron acceptors, the electrical energy can be utilized more efficiently, and the key of direct use of electrical energy in biodegradation is the development of highly active electroactive biofilm and the increase of electron transfer between microbes and the electrode. Furthermore, the synergy of different microbial electrochemical units has additional benefit in energy and resource recovery, making wastewater treatment more sustainable.     

一种关于点型探测器火灾探测能力的评估方法

以探测器火灾信息数据库为依据,通过对目前使用最为广泛的各种点型感烟、感温及CO气体探测器对八种典型试验火响应数据测量及数据挖掘,提出用梯度幅值评估方法,对上述探测器的火灾探测能力作出相应的评估结论,为城市建筑火灾自动探测报警系统的正确设计、选型和使用提供了参考理论依据。     

综合管廊内火灾自动报警探测器实验研究

为了能够有效提升综合管廊内火灾自动报警系统的准确性和可靠性,本文采用火灾实体试验的方法,通过对各类型火灾自动报警探测器响应时间的情况进行分析和比较,研究综合管廊电力舱内常用探测器的性能。研究结果表明:接触式缆式线型感温火灾探测器可以较早的探测到电缆温度异常变化的现象,可用于早期预警。点型感烟探测器对烟粒子浓度较为敏感,可用于综合管廊电力舱室的空间探测。分布式光纤型感温火灾探测器对明火温度的变化较为敏感,作为空间型的火灾探测器比较可靠。     

Effect of steam hydration on performance of lime sorbent for CO2 capture

Lime is considered a feasible sorbent for the capture of CO₂ from large stationary sources. The positive attributes of a natural source material, low cost and lack of harmful by-products are offset by rapid deterioration in performance and high regeneration temperature. Performance can be improved by hydrating the lime using steam. We investigate a steam hydration process wherein lime is hydrated for 5 min at 300 °C and atmospheric pressure in a mixture of steam and CO₂. The experiments consisted of 10 capture cycles with 60% of the lime active at the end. Extrapolation using a decay model suggests a residual carbonation level of 48%, significantly higher than the 8% achieved by dry lime cycles. The cost of replacement sorbent under these conditions is less than $1/t of CO₂ captured. The hydrated lime process also reduces the thermal load, for heating and cooling, by half as well as the inventory, and therefore solids handling, by a factor 5 over dry lime. The introduction of the hydration reaction provides another exothermic reaction for heat management.     

Effect of electron beam irradiation on the degradation of monochlorophenols in aqueous solution

Electron beam was successfully used for the degradation of 2-chlorophenol (2-CP) and 4-chlorophenol (4-CP) in aqueous solutions in this research. The effect of radiation dose on substrate degradation and dechlorination of solutions with concentration of 50mg/L was investigated. The effect of initial concentration, pH and presence of oxygen was also investigated. The concentration of 2-CP and 4-CP remaining in solution after irradiation were measured by HPLC. The results showed that increased radiation dose led to increased degradation of the chlorophenols and increased CI^- yield. Deaeration was also found to significantly increase the rate of degradation of chlorphenols in water while degradation and dechlodnation under alkaline condition was lower than at low to neutral pH.     

典型可燃物燃烧烟尘物化特性差异性研究

开展对典型可燃物燃烧烟尘的物化特性差异性研究,是全面了解烟尘信息的基础.基于可控条件下的燃烧试验,对典型可燃物燃烧烟尘物理特性和化学组分进行了分析.通过对比分析汽油燃烧烟尘、聚苯乙烯燃烧烟尘、ABS燃烧烟尘及柴油烟尘和正庚烷烟尘的透射电镜图片,对透射电镜图的紧凑性、复杂性及灰度值进行了深入分析,探讨了燃烧烟尘的物理差异性.利用固相微萃取-气质联用技术(SPME-GC-MS),对汽油燃烧烟尘、聚苯乙烯燃烧烟尘、ABS燃烧烟尘化学组分进行了分析和对比.通过燃烧烟尘的特征物质组分的分析,得到3种燃烧烟尘在特征物质的分布和出峰时间等方面的差异性.这些差异性可作为对烟尘来源及燃烧条件等因素判别的依据.