Protection of Genetic Diversity and Maintenance of Connectivity among Reef Corals within Marine Protected Areas

Abstract: High‐latitude coral reefs (HLRs) are potentially vulnerable marine ecosystems facing well‐documented threats to tropical reefs and exposure to suboptimal temperatures and insolation. In addition, because of their geographic isolation, HLRs may have poor or erratic larval connections to tropical reefs and a reduced genetic diversity and capacity to respond to environmental change. On Australia's east coast, a system of marine protected areas (MPAs) has been established with the aim of conserving HLRs in part by providing sources of colonizing larvae. To examine the effectiveness of existing MPAs as networks for dispersal, we compared genetic diversity within and among the HLRs in MPAs and between these HLRs and tropical reefs on the southern Great Barrier Reef (GBR). The 2 coral species best represented on Australian HLRs (the brooding Pocillopora damicornis and the broadcast‐spawning Goniastrea australensis) exhibited sharply contrasting patterns of diversity and connectedness. For P. damicornis, the 8‐locus genetic and genotypic diversity declined dramatically with increasing latitude (N_a= 3.6–1.2, H_e= 0.3–0.03, N_g:N = 0.87–0.06), although population structure was consistent with recruitment derived largely from sexual reproduction (G_o:G_e= 1.28–0.55). Genetic differentiation was high among the HLRs (F_ST[SD]= 0.32 [0.08], p < 0.05) and between the GBR and the HLRs (F_ST= 0.24 [0.06], p < 0.05), which indicates these temperate populations are effectively closed. In contrast for G. australensis, 9‐locus genetic diversity was more consistent across reefs (N_a= 4.2–3.9, H_e= 0.3–0.26, N_g:N = 1–0.61), and there was no differentiation among regions (F_ST= 0.00 [0.004], p > 0.05), which implies the HLRs and the southern GBR are strongly interconnected. Our results demonstrate that although the current MPAs appear to capture most of the genetic diversity present within the HLR systems for these 2 species, their sharply contrasting patterns of connectivity indicate some taxa, such as P. damicornis, will be more vulnerable than others, and this disparity will provide challenges for future management.     

First-trimester screening: dealing with the fall-out

The articles collected together in this issue describe first-trimester screening for a variety of complications. With the advance of both technology and research, early pregnancy screening is becoming ever more sophisticated and complex. While there are clear benefits to most women receiving early reassurance that their baby is developing as expected, there is no evidence to suggest that an earlier prenatal diagnosis has less long-term emotional impact than at later gestations. The poignancy of ultrasound images for many parents means that it can be especially difficult to manage the anxiety when an ultrasound marker is highlighted as potential cause for concern. They can then face a journey of anxiety-laden uncertainty, which can extend through much of the pregnancy, and even beyond. Professionals involved in screening need to recognise and acknowledge such adverse side-effects and develop the skills necessary to help parents understand and cope with the uncertainties inherent in the process. Copyright © 2011 John Wiley & Sons, Ltd.     

Channel flow and trichloroethylene treatment in a partly iron-filled fracture: experimental and model results

Technical developments have now made it possible to emplace granular zero-valent iron (Fe(0)) in fractured media to create a Fe(0) fracture reactive barrier (Fe(0) FRB) for the treatment of contaminated groundwater. To evaluate this concept, we conducted a laboratory experiment in which trichloroethylene (TCE) contaminated water was flushed through a single uniform fracture created between two sandstone blocks. This fracture was partly filled with what was intended to be a uniform thickness of iron. Partial treatment of TCE by iron demonstrated that the concept of a Fe(0) FRB is practical, but was less than anticipated for an iron layer of uniform thickness. When the experiment was disassembled, evidence of discrete channelised flow was noted and attributed to imperfect placement of the iron. To evaluate the effect of the channel flow, an explicit Channel Model was developed that simplifies this complex flow regime into a conceptualised set of uniform and parallel channels. The mathematical representation of this conceptualisation directly accounts for (i) flow channels and immobile fluid arising from the non-uniform iron placement, (ii) mass transfer from the open fracture to iron and immobile fluid regions, and (iii) degradation in the iron regions. A favourable comparison between laboratory data and the results from the developed mathematical model suggests that the model is capable of representing TCE degradation in fractures with non-uniform iron placement. In order to apply this Channel Model concept to a Fe(0) FRB system, a simplified, or implicit, Lumped Channel Model was developed where the physical and chemical processes in the iron layer and immobile fluid regions are captured by a first-order lumped rate parameter. The performance of this Lumped Channel Model was compared to laboratory data, and benchmarked against the Channel Model. The advantages of the Lumped Channel Model are that the degradation of TCE in the system is represented by a first-order parameter that can be used directly in readily available numerical simulators.     

Modelling of dust lifting process behind propagating shock wave

Dust dispersion from a layer is a complicated problem, which has not been completely solved yet, especially if an Eulerian–Eulerian approach has to be used to model the two-phase dusty flow. In previous investigation, a phenomenological model of the dust dispersion process from a layer was developed, but the evaluation of the model revealed some weaknesses. In the current paper, the model of the dust dispersion process was presented and three improvements of the model were studied: Saffman force, Magnus force and particles collisions. The implementation of Magnus and Saffman forces into the code did not improve the numerical results and it was shown that it had very little influence on the dust lifting process, in case the phenomenological model of the layer is used. Some explanations were proposed in the paper. Besides, an empirical model of particles collisions was also added to the code and its influence on the results was studied. It was shown that the particles collisions model improved the obtained results, but further modifications are to be studied in the future.     

基于面板数据的土地投入对经济增长的影响-以浙江省为例

采用生产函数与面板数据回归模型相结合的研究手段，以地处经济发达地区的浙江省为实证研究区域对土地要素投入对经济增长的影响进行了定量的研究。研究结果表明：(1)就规模效应而言，浙江省的经济增长处于规模报酬不变的发展阶段；(2)浙江省经济增长对劳动力要素的投入最为敏感，其中土地要素、劳动力要素和资本要素增加1个单位的投入量对经济增长的推动为 0.247 3、0.538 5 和 0.321 6；（3）固定资产投入在研究期间是浙江省经济增长的主要推动力，其贡献率达到6823%，而劳动力要素与土地要素则分别为2346%和625%；(4)浙江省土地利用不够集约，在研究期间土地要素对经济增长的影响能被资本要素与劳动力要素有效替代，而劳动力要素则难以被资本投入与土地投入有效替代，劳动集约型产业应该成为浙江省未来发展方向之一。     

Trace element partitioning in ashes from boilers firing pure wood or mixtures of solid waste with respect to fuel composition,chlorine content and temperature

Trace element partitioning in solid waste (household waste, industrial waste, waste wood chips and waste mixtures) incineration residues was investigated. Samples of fly ash and bottom ash were collected from six incineration facilities across Sweden including two grate fired and four fluidized bed incinerators, to have a variation in the input fuel composition (from pure biofuel to mixture of waste) and different temperature boiler conditions. As trace element concentrations in the input waste at the same facilities have already been analyzed, the present study focuses on the concentration of trace elements in the waste fuel, their distribution in the incineration residues with respect to chlorine content of waste and combustion temperature.Results indicate that Zn, Cu and Pb are dominating trace elements in the waste fuel. Highly volatile elements mercury and cadmium are mainly found in fly ash in all cases; 2/3 of lead also end up in fly ash while Zn, As and Sb show a large variation in distribution with most of them residing in the fly ash. Lithophilic elements such as copper and chromium are mainly found in bottom ash from grate fired facilities while partition mostly into fly ash from fluidized bed incinerators, especially for plants fuelled by waste wood or ordinary wood chips. There is no specific correlation between input concentration of an element in the waste fuel and fraction partitioned to fly ash. Temperature and chlorine content have significant effects on partitioning characteristics by increasing the formation and vaporization of highly volatile metal chlorides. Zinc and cadmium concentrations in fly ash increase with the incineration temperature.     

An empirical analysis on the impact of environmental regulations on pork trade:evidence from China

This paper uses the gravity model to examine the effect of environmental regulations on pork trade flows between different regions within China.We apply a linear programming tool to estimate pork trade flows from 2000 to 2008,and discuss the environmental acts on livestock pollution and income level to proxy environmental regulations.We use OLS regression and panel data with dummy variable in the cross-sectional GLS estimation.Our results indicate that the gap of environmental regulations between trade partners has a positive relationship with pork trade flows,and the difference in environmental regulations changes the traditional comparative advantage pattern to some extent.This paper provides convincing evidence for the pollution haven effect on livestock in China.     

CFD simulations of dust dispersion in the 20 L vessel: Effect of nominal dust concentration

Measurements of flammability and explosion parameters for dust/air mixtures require uniform dispersion of the dust cloud inside the test vessel. In a previous work, we showed that, in the standard 20 L sphere, the dust injection system does not allow generation of a uniform cloud, but rather high gradients of dust concentration are established. In this work, we used a previously validated three-dimensional CFD model to simulate the dust dispersion inside the 20 L sphere at different dust nominal concentrations (and fixed dust diameter). Results of numerical simulations have shown that, as the dust nominal concentration is increased, sedimentation prevails and, thus, when ignition is provided, the dust is mainly concentrated at the vessel walls.     

水下连接器试压帽结构动态仿真及密封性分析

为解决水下连接器现有力学模型过于简化，预紧力加载不够合理，密封性能分析结果不够准确的问题，基于ABAQUS有限元模拟提出了新的动态接触分析方法，针对水下连接器试压帽双头螺柱结构，探究了安装和试压工况中该结构形式的密封特性及其与等效拧紧力矩的非线性关联。研究结果表明:在塑性失效设计准则范围内，2种工况下密封环的Mises值最大为399.4 MPa；安装工况下，随预紧力的增加，密封环上、下锥面最大接触应力先增大后略微减小；1 145 Nm螺栓拧紧力矩可完成安装工况，并能在试压工况中保证各部件不被弹开；试压工况下，随试验内压的增加，密封环上锥面最大应力缓慢增加，下锥面最大接触应力几乎不变，最终2值近似相等约为850 MPa，密封宽度合理。     

Artificially roughened solar air heater: A comparative study

Artificially roughened solar air heater has been topic in research for the last 30 years. Prediction of heat transfer and fluid flow processes of an artificially roughened solar air heater can be obtained by three approaches: theoretical, experimental, and computational fluid dynamics (CFD). This article provides a comprehensive review of the published literature on the investigations of artificially roughened solar air heater. In the present article, an attempt has been made to present holistic view of various roughness geometries used for creating artificial roughness in solar air heater for heat transfer enhancement. This extensive review reveals that quite a lot of work has been reported on design of artificially roughened solar air heater by experimental approach but only a few studies have been done by theoretical and CFD approaches. Finally this article presents a comparative study of thermo-hydraulic performance of 21 different types of artificial roughness geometries attached on the absorber plate of solar air heater in terms of thermo-hydraulic performance parameter. Heat transfer and friction factor correlations developed by various investigators for different types of artificially roughened solar air heaters have also been reported in this article.