用S型皮托管测固定污染源排气参数的方法探讨

针对固定污染源排气监测实际工作用S型皮托管测定静压方法有争议的问题进行了理论分析和低速风洞试验。结果表明,用S型皮托管测固定污染源排气静压的平行法和垂直法二方法都在不影响排气量和污染物排放量测定结果的范围内;用全压与平行法静压差作为动压来计算流速可影响较大。     

溶剂法生产酞菁兰废水处理工艺

分析了煤油溶剂法生产酞菁兰过程中废水产生的节点及特征，介绍了以回收利用与末端处理相结合使废水减量化和达标排放的酞菁兰废水处理方法     

Methane emission in a rice field of Thailand

ＭｅｔｈａｎｅｅｍｉｓｓｉｏｎｉｎａｒｉｃｅｆｉｅｌｄｏｆＴｈａｉｌａｎｄ￥ＲｏｎｇＸｉａｎｇ；Ｃｈｕｅｎ－ＨｏｗＮｇ（ＥｎｖｉｒｏｎｍｅｎｔａｌＥｎｇｉｎｅｅｒｉｎｇＰｒｏｇｒａｍ，ＳｃｈｏｏｌｏｆＥｎｖｉｒｏｎｍｅｎｔ，ＲｅｓｏｕｒｃｅｓａｎｄＤ...     

不同气氛下燃煤SO2的排放规律研究

在立式管状电加热炉上对合山高硫煤在不同的气氛、温度以及Ca／S比的条件下进行了动态燃烧实验，对收集的气体产物进行了红外光谱分析，并讨论了CO2浓度以及温度等因素对SO2释放的影响。结果表明：不同浓度的CO2气氛对煤燃烧过程中硫的释放以及石灰石的固硫效率有着不同的影响，在高于900℃以后，较之空气气氛下，无论是否存在钙基固硫剂，其它三种02／C02气氛下S02的排放量都比较低，且在不同C02浓度下，温度对S02的排放影响不一致。     

广州市实施二氧化硫排污权交易研究

在排污权交易的理论基础上,借鉴美国二氧化硫排放权交易的政策和方法,设计了一套广州市实施二氧化硫排污权交易的框架,旨在为广州市控制削减二氧化硫排放提供一种基于市场的环境管理手段.     

土壤对六价铬的还原容量初步研究

提出并讨论了土壤的潜在还原容量、有效还原容量和条件还原容量等概念，通过对采用北京和唐山地下水饮用水源区３个包气带土壤样品的土柱淋滤实验，研究了土壤对水溶液中六价铬的还原作用，研究了上述土壤各种还原容量之间的关系及影响因素，探讨了向土壤中投加适量常见，无毒，价廉的还原性物质以提高土壤还原能力的方法和将其应用于去除灌溉用污染地下水中六价铬的可能性，实验结果表明，在正常环境条件下，土壤的有效还原容量比土     

Limb reduction and chorion villus sampling

Upper limb reduction was diagnosed by ultrasound scan at 17 weeks after chorion villus sampling at 9 weeks' gestation. Pregnancy was terminated and necropsy confirmed limb reduction in an otherwise normal fetus. The relationship of limb reduction to amniotic band syndrome is discussed.     

V2O5-WO3/TiO2脱硝催化剂的制备及其性能

对选择性催化还原脱硝用催化剂V2O5-WO3/TiO2的制备工艺进行了实验研究.采用溶胶-凝胶法制得TiO2凝胶,对凝胶进行不同条件下的干燥和煅烧处理,然后通过浸渍法在TiO2上依次负载WO3和V2O5,最终得到V2O5-WO3/TiO2催化剂.结果表明,TiO2凝胶的处理温度对催化剂结构和脱除NO的性能有一定的影响,TiO2凝胶干燥温度为105 ℃时制得的催化剂活性较高,在实验条件下NO脱除率最高可达98.3%.     

Biogenic VOCs emission inventory development of temperate grassland vegetation in Xilin River basin, Inner Mongolia, China

Given the key role of biogenic volatile organic compounds(VOCs) to tropospheric chemistry and regional air quality, it is important to generate accurateVOCs emission inventories. However, only a less fraction of plant species, in temperate grassland of Inner Mongolia, has been characterized by quantitative measurements. A taxonomic methodology, which assigns VOCs measurements to unmeasured species, is an applicable and inexpensive alternation for extensive VOCs emission survey, although data are needed for additional plant families and genera to further validate the taxonomic approach in grassland vegetation. In this experiment, VOCs emission rates of 178 plant species were measured with a portable photoionization detector( PID). The results showed the most of genera and some families have consistent feature of their VOCs emission, especially for isoprene, and provide the basic premise of taxonomic methodology to develop VOCs emission inventories for temperate grassland. Then, the taxonomic methodology was introduced into assigning emission rate to other 96 species, which no measured emission rates available here. A systematical emission inventory of temperate grassland vegetation in Inner Mongolia was provided and further evidence that taxonomy relationship can serve as a useful guide for generalizing the emissions behavior of many, but not all, plant families and genera to grassland vegetation.     

Methods for project-based mechanisms (JI/CDM)—relevance of IPCC inventory guidelines

A baseline for a project consists of estimates of annual emissions of greenhouse gases (GHG) for a given time period without implementing the project. A general three-step process for determining the baseline is suggested. The emission reduction of the project is given by the difference between the baseline and the monitored annual emissions. A preferred method, direct measurement of the emission reduction, is possible for some types of projects. Methods for estimating the annual baseline emissions are not necessary for the latter category, and a definition of this project category is suggested. IPCC Guidelines for National GHG Inventories categorise the emission sources so that only direct emissions from consumption of fuel and feedstock are calculated. There are thus no emission factors for indirect emissions (e.g. electricity consumption or km transported) or emission factors that depend on technology only, independent of consumption of fuel and feedstock. Technology-dependent emission factors may thus need to be developed for estimating indirect emissions and multi-project baselines. Consistency should be sought with the IPCC Guidelines when estimating annual baseline emissions and in monitoring project emissions to ensure comparability with the National Inventories.