二维无压稳定渗流分析的改进方法

人类发展演变过程中,经历了各种各样的地质作用所造成的灾害,其中大部分地质灾害的形成都有地下水的参与,因而确定地质体稳定性时不能忽略地下水。无压渗流是比较复杂的非线性问题,难点在于如何求自由面, 尤其是对溢出点的求解一直没有很好的解决。本文提出了求解无压渗流自由面的一种新方法,在采用等效渗透系数法搜索到自由面后,通过反复移动溢出点再次搜索自由面,最终达到准确求解自由面的目的。实例证明该方法是简单准确有效的。本方法对解决工程问题具有一定的实际意义。     

Dynamic fate modeling of γ-hexachlorocyclohexane in the lower reaches of the Liao River

A QWASI model dependent on temperature is parameterized to describe the long-term fate of persistent organic pollutants (POPs) in the Liao River. The model parameters, namely fugacity capacity, degradation rate, and transfer coefficient, are profoundly affected by temperature. This model is used to simulate the fate of γ-hexachlorocyclohexane (γ-HCH) in the lower reaches of the Liao River from 1998 to 2008. Modeling results show that γ-HCH fugacity capacities in air, water, and sediment increase as temperature decreases, and the transfer and transformation rate coefficients increase as temperature increases. The variations of transfer and transformation parameter D values depend on fugacity capacities, and transfer and transformation coefficients simultaneously. The performance of the model is evaluated by comparing the predicted and observed concentrations in the water and sediment of the Liao River. The predicted values agree well with the observed value in the order of magnitude, in most cases within the factor of 3. It is believed that the model is appropriate for simulating the long term fate of POPs in the Liao River. Translated from Environmental Science, 2006, 27(1): 121–125 [译自: 环境科学]     

测空气中SO2时的主要影响因素

目前测定空气中SO2主要采用甲醛吸收-副玫瑰苯胺分光光度法。该法操作比较严格，测试结果的准确度受诸多因素的影响。因此文中对这些影响因素进行了探讨，主要为试剂质量、显色温度和显色时间、溶液加入顺序、比色皿、空气采样器流量、采样温度、导气管的吸附等因素对测定结果的影响进行了探讨。     

利用多次回归拟合水的饱和蒸气压与温度的关系表达式

在使用于湿球测定锅炉烟气含湿量的过程中,需要查找水的饱和蒸气压,非常不方便.利用D-196和<化工原理>上册中取得部分数据,用多次线性回归的方法,拟合出水在0～200℃范围内的饱和蒸气压与温度的关系表达式;并对该表达式的误差进行了分析,误差均值为0.2‰,最大值也只有0.8‰,完全可以满足环境监测中数据处理的精度要求.     

铝酸钙去除水中氟离子的条件研究

采用铝酸钙粉,进行去除模拟废水中氟离子的条件研究,并进行了pH值、温度等多项条件的系列实验。实验得出,当氟离子浓度为215mg/L,反应溶液为200mL,反应温度是影响去除率的主要因素,去除主要发生在前15min,除氟主要依靠沉淀、络合等作用。pH为11,40℃时,投加量50g/L时,去除率可以达到95.7%以上,出水可直接达标。     

袋式除尘器在立窑烟气除尘中的应用

对立窑烟尘排放特点与立窑除尘工艺中的问题及对策进行了讨论。分析了立窑烟尘排放特征,对几种常见的立窑除尘的设备和工艺进行了比较,指出袋式除尘器可成功地用于立窑烟气除尘。并且从滤料选择、清灰方式、烟温控制、灰斗的气密性等方面详细地完善了袋式除尘器在立窑烟气除尘中的应用。     

The effect of heating temperature of thin film transistor-liquid crystal display (TFT-LCD) optical waste glass as a partial substitute partial for clay in eco-brick

In order to fulfill the current WEEE directives, the traditional approach to manage thin film transistor-liquid crystal display (TFT-LCD) waste glass is inadequate. It is a serious opportunity to achieve resource conservation, reduction, stabilization and safety of management of TFT-LCD in the near future. To assist in achieving these goals, this study investigated the sintering characteristics and material properties of TFT-LCD waste glass, which can be pulverized and ground and subsequently blended with clay, at various substitution levels (0–40%) and finally fired from 800 °C to 1000 °C to make eco-brick. The brick thus produced was analyzed to determine variations in weight losses on ignition, 24-h absorption, bulk density, shrinkage, compressive strength and microstructure changes. The results for specific gravity, water adsorption, and compressive strength revealed that bricks made from mixtures containing TFT-LCD waste glass met the general requirements for bricks. The advantages of less water absorption, less weight loss on ignition, and a gain in compressive strength in the clay-TFT-LCD waste glass bricks should encourage the use of TFT-LCD waste glass as a brick additive.     

超级钢闪光对焊电热耦合过程温度场分布的有限元分析

为研究超级钢闪光对焊闪光阶段焊件的温度场分布 ,建立了轴对称有限元模型。运用单元死活技术解决闪光时液体过梁爆破引起物质烧损的模拟问题 ,提出了闪光焊过程中电热耦合作用的模拟方法。考虑单元死活的有限元分析结果与试验结果更加吻合 ,为选择和优化闪光焊焊接参数以及为闪光焊过程顶锻阶段的热力耦合过程的模拟提供了有效的分析手段     

兼性生化处理生活污水最佳工况研究

在常温条件下进行兼性生化处理生活污水试验,研究COD去除率与HRT、MLSS、进水有机物浓度和混合液水温的关系。在试验中最佳的水平搭配为MLSS=5500mg/L,进水有机物浓度=180mg/L,HRT=8h和混合液水温=20℃,与回归分析所得出MLSS=5881mg/L,进水有机物浓度=192.7mg/L,HRT=8.9063h和混合液水温=21.3790℃的最佳工艺条件相吻合。最后通过等高线分析得出常温下生活污水兼性生化的适宜范围。     

天津地区集装箱内部低温环境条件研究

以天津地区冬季采用集装箱储存货物为背景,在天津对集装箱内部温度和大气温度等数据进行测试,对数据进行回归分析后,建立集装箱内部温度模型,预测出该地区集装箱内部最恶劣的低温极值范围,为危险货物集装箱安全储运提供理论依据,并提出了相应的对策及建议。