多因素影响下巷道变形特性数值模拟研究

基于FLAC3D有限差分软件对开挖深度、侧压力系数、断面形状等多因素影响下的巷道变形参数进行正交试验，根据正交试验分析结果，分别选取同一深度条件下的圆形、马蹄形、直墙拱形、矩形巷道进行模拟试验并以圆形巷道作为典型断面，对不同深度下的巷道变形特征进行模拟试验。研究结果表明:开挖深度对巷道开挖后的应力差变化影响明显，断面形状对巷道围岩内的塑性区深度和具有显著影响；巷道开挖后的塑性区深度和随形状指数增加而呈线性增长趋势，圆形巷道的塑性区深度和最小，矩形最大；应力差随着巷道开挖深度的增加呈线性增加，深部开采应重视巷道内的应力分布情况。     

上海市郊4种地表径流深度的测算

根据有关试验资料和美国土壤保持局推荐的方法，提出了上海市郊４种地表径流深度的计算公式。计算结果表明，当年降雨量为１０５３ｍｍ时，上海市郊４种地表径流的总量为１３．６亿ｍ＾３，平均径流深度为３００ｍｍ，径流系数为２８．４９％，４种径流量占郊区总量的７７．８２％，产流面积为郊区总面积的７５．１０％。     

利用多台首波Pn、直达波Pg走时确定地壳厚度及波速

本文通过对首波Pn、直达波Pg的走时的反演,推导出地壳厚度、震源深度、P波在地壳中、壳幔边界的传播速度之间的关系式,利用多台地震记录确定一个区域内这些参数的值,从而建立出该区域的地壳模型。     

羌塘高原水资源及其开发利用

地跨西藏、新疆、青海3省（区）的羌塘高原是我国青藏高原的主体部分,平均海拔5000m以上,总面积71.6×10⁴km²,占我国陆地面积的7.5％。整个高原严寒干燥,湖泊众多,河流短小,冰川发育,是世界上待开发的一块最高最新的内陆大高原。现有地表、地下迳流约236.15×10⁸m³,水质符合饮用与灌溉要求。但目前基本流入湖泊后破蒸发,如果大量开发迳流势必破坏水循环规律,人为地加速湖泊的消亡。为解决今后工农牧业用水,只能千方百计减少蒸发,取得可利用水量,达到发展经济维持生态平衡的目的。     

Effects of soiling and cleaning on the reflectance and solar heat gain of a light-colored roofing membrane

A roof with high solar reflectance and high thermal emittance (e.g., a white roof) stays cool in the sun, reducing cooling power demand in a conditioned building and increasing summertime comfort in an unconditioned building. The high initial solar reflectance of a white membrane roof (circa 0.8) can be lowered by deposition of soot, dust, and/or biomass (e.g., fungi or algae) to about 0.6; degraded solar reflectances range from 0.3 to 0.8, depending on exposure. We investigate the effects of soiling and cleaning on the solar spectral reflectances and solar absorptances of 15 initially white or light-gray polyvinyl chloride membrane samples taken from roofs across the United States. Black carbon and organic carbon were the two identifiable strongly absorbing contaminants on the membranes. Wiping was effective at removing black carbon, and less so at removing organic carbon. Rinsing and/or washing removed nearly all of the remaining soil layer, with the exception of (a) thin layers of organic carbon and (b) isolated dark spots of biomass. Bleach was required to clear these last two features. At the most soiled location on each membrane, the ratio of solar reflectance to unsoiled solar reflectance (a measure of cleanliness) ranged from 0.41 to 0.89 for the soiled samples; 0.53 to 0.95 for the wiped samples; 0.74 to 0.98 for the rinsed samples; 0.79 to 1.00 for the washed samples; and 0.94 to 1.02 for the bleached samples. However, the influences of membrane soiling and cleaning on roof heat gain are better gauged by fractional variations in solar absorptance. Solar absorptance ratios (indicating solar heat gain relative to that of an unsoiled membrane) ranged from 1.4 to 3.5 for the soiled samples; 1.1 to 3.1 for the wiped samples; 1.0 to 2.0 for the rinsed samples; 1.0 to 1.9 for the washed samples; and 0.9 to 1.3 for the bleached samples.     

Direct-push geochemical profiling for assessment of inorganic chemical heterogeneity in aquifers

Discrete-depth sampling of inorganic groundwater chemistry is essential for a variety of site characterization activities. Although the mobility and rapid sampling capabilities of direct-push techniques have led to their widespread use for evaluating the distribution of organic contaminants, complementary methods for the characterization of spatial variations in geochemical conditions have not been developed. In this study, a direct-push-based approach for high-resolution inorganic chemical profiling was developed at a site where sharp chemical contrasts and iron-reducing conditions had previously been observed. Existing multilevel samplers (MLSs) that span a fining-upward alluvial sequence were used for comparison with the direct-push profiling. Chemical profiles obtained with a conventional direct-push exposed-screen sampler differed from those obtained with an adjacent MLS because of sampler reactivity and mixing with water from previous sampling levels. The sampler was modified by replacing steel sampling components with stainless-steel and heat-treated parts, and adding an adapter that prevents mixing. Profiles obtained with the modified approach were in excellent agreement with those obtained from an adjacent MLS for all constituents and parameters monitored (Cl, NO(3), Fe, Mn, DO, ORP, specific conductance and pH). Interpretations of site redox conditions based on field-measured parameters were supported by laboratory analysis of dissolved Fe. The discrete-depth capability of this approach allows inorganic chemical variations to be described at a level of detail that has rarely been possible. When combined with the mobility afforded by direct-push rigs and on-site methods of chemical analysis, the new approach is well suited for a variety of interactive site-characterization endeavors.     

长江三角洲大气气溶胶光学厚度分布和变化趋势研究

利用2000～2005年MODIS Level 2气溶胶产品分析了长江三角洲区域气溶胶光学厚度的分布和季节变化特点.结果显示,近年来长江三角洲气溶胶光学厚度值较高的区域逐年增加,光学厚度大于1.0的区域面积增加最快.根据城市气溶胶季节变化特征研究,发现长江三角洲地区各主要城市近年气溶胶有逐渐增加的趋势.统计结果表明,平原城市群气溶胶年峰值出现在夏季;山区城市群气溶胶年峰值出现在春季.平原城市群光学厚度增加速度大于山区城市群.     

卫星遥感AOD反演地面细颗粒物浓度方法与效果

使用2015~2018年MODIS AOD产品融合地表气象资料反演了地面细颗粒物（PM_2.5）浓度,并以反演的PM_2.5浓度为依据,比较了地面PM_2.5观测资料的各种空间插值方法.结果表明：2015~2018年反演的PM_2.5平均浓度与地基观测平均浓度的R²达0.94;干季反演效果好于湿季,珠江三角洲反演效果好于非珠江三角洲地区,原因是湿季天气系统较不稳定,非珠江三角洲地区多山脉和秸秆燃烧,导致气溶胶标高、质量消光效率等假设误差较大.使用4种插值方法对地基观测的PM_2.5浓度进行插值,插值结果大致相当,反距离加权插值法较好,站点分布不均、部分区域站点密度小影响插值效果,建议在站点稀疏地区增加地面PM_2.5观测站点.     

长株潭城市群气溶胶时空分布与传输规律

为研究长株潭城市群大气污染时空演化特征及潜在传输规律,采用2008~2016年中分辨率成像光谱仪（MODIS）MAIAC气溶胶光学厚度（AOD）数据,分析长株潭城市群近10a来AOD演化特征.在此基础上,利用拉格朗日混合型单粒子轨迹模式（HYSPLIT）及全球资料同化系统（GDAS）气象要素数据研究大气污染物潜在传输规律.结果表明,长株潭城市群AOD呈现下降趋势,并以春、夏季下降幅度最为显著.空间上,AOD总体呈北高南低、西高东低分布特征,并与经济发展、城市化水平等因素密切相关.此外,长株潭城市群大气污染物向外长距离传输（>1500km）、中距离传输（500~1500km）以及局地传输（0~500km）比率分别为17.89%、36.45%和45.66%,主要影响湖北、江西、安徽、广东、广西、江苏和浙江等地区.研究结果有助于理解长株潭城市群大气污染的时空变化规律,同时为区域“联防联控”、建设“美丽中国”提供科学的辅助依据.     

基于MODIS_C061的长三角地区AOD与Angström指数时空变化分析

以长三角为研究区,利用AERONET地基观测的气溶胶光学厚度(AOD)数据,验证了基于MODIS_C061深蓝算法(DB)的AOD产品适用于长三角地区.并利用2000～2018年MOD04_L2产品,分析研究区AOD和Angstr?m指数(AE)的时空变化特征.结果表明,长三角地区AOD呈现东部和北部平原地区高、南部和西部山区低的空间分布,AE呈现南部地区高北部地区低的空间分布. 2003～2007年,AOD年均值增长显著,增长率为23%, 2011年以后逐渐下降; 2001～2003年,AE年均值增长迅速, 2012年以后逐渐下降.AOD在长三角地区呈现夏季最高、冬季最低的显著季节性变化,月均值6月最高达0.84, 8月最低为0.40;AE呈现秋季最高,春季最低的季节性变化,月均值9月最高达1.47, 3月最低为1.08.根据AOD与AE的关系,对长三角地区气溶胶类型进行了研究,结果表明人为产生的城市工业气溶胶是该地区主要的气溶胶类型,其次为混合型和清洁大陆型.