Novel materials for environmental remediation of tailing pond waters containing naphthenic acids

A nanofiltration strategy for tailing pond waters (TPWs) that utilizes cyclodextrin (CD)-based polymeric materials as supramolecular sorbents is proposed. Naphthenic acids (NAs) from the Athabasca TPWs are investigated as the target sorbate molecules.The sorption properties of several supramolecular porous materials were characterized using equilibrium sorption isotherms in aqueous solution wherein electrospray ionization mass spectrometry was used to monitor the concentration of NAs in aqueous solution. The characterization of the supramolecular sorbents was performed using ¹³C NMR and IR spectroscopy, while nitrogen porosimetry was used to estimate their surface area and pore structure properties. Independent estimates of surface area were obtained using a chromophore dye adsorption method in aqueous solution.The sorption results for NAs in solution were compared between a commercially available standard; granular activated carbon (GAC) and three types of synthetic materials. The sorption capacities for GAC ranged from 100 to 160 mg NAs/g of material whereas the polymeric materials ranged from 20 to 30 mg NAs/g of material over the experimental conditions investigated. In general, differences in the sorption properties between GAC and the CD-based sorbents were observed and related to differences in the surface areas of the materials and the chemical nature of the sorbents. The CD-based supramolecular materials displayed sorption capacities ranging from 36.2 to 657 m²/g as compared to that for GAC (795 m²/g).     

Evaluation of resin and fatty acid concentration levels by online sample enrichment followed by atmospheric pressure chemical ionization-mass spectrometry (APCI-MS)

Background, aim, and scope  In papermaking, there is a continuous interest both to minimize fresh water consumption and to reduce discharges into the environment. These general trends mean an increase in the amounts of detrimental substances, such as resin and fatty acids, in papermaking process waters. Resin acids, in particular, are responsible for much of the toxicity typically present in paper mill effluents and, for this reason, the routine and rapid monitoring of these compounds in various process streams is necessary. This also means that there is a continuous need to develop straightforward offline and online techniques to clarify problems occurring, for example, as a result of the introduction of more intensively closed systems of water circulation. In the present study, we describe the use of a novel, online, sample enrichment technique followed by atmospheric pressure chemical ionization–mass spectrometry (APCI-MS) suitable for monitoring the concentration levels of common resin and fatty acids in papermaking process waters. Materials and methods  The representative process water samples were taken from the grinding zone of a thermomechanical pulping mill. The samples were first preconcentrated in a precolumn C18, and the analytes were transferred online to MS. The high intensive [M–H]⁻ ion was used for the identification of each analyte since, according to the present ionization method, no other fragmentation was observed. Laboratory-scale, online measurements with an online sample feed were carried out by connecting a centrifugal pump and a ceramic filter to the APCI-MS. Results  Quality parameters, such as repeatability, linearity, and limit of detection (LOD), were determined by using dehydroabietic acid (DHAA) in order to evaluate the suitability of the method for the rapid screening of concentration levels. This method provided satisfactory linearity and a good correlation between analyte concentration and peak area. The suitability of the system for the continuous analysis of the same acids was evaluated in laboratory-scale, online experiments. In all cases, the response to changes in the analyte concentration was linear, and the repeatability of the system was also satisfactory. Discussion  Only a few studies have been published on the analysis of resin and fatty acids with MS techniques. The present method was applied to the monitoring of dehydroabietic, oleic, and stearic acids. The quality parameters were highly comparable with those reported earlier, and the LOD values of the DHAA were below the levels usually encountered in process waters. The quality parameters were only slightly higher than those obtained by the traditional methods of analysis, probably due to the absence of an effective sample clean-up before analysis. Conclusions  The results of the laboratory-scale, online experiments indicated that the online enrichment APCI-MS system is a suitable alternative for monitoring the concentration levels of selected resin and fatty acids in papermaking process waters. The method can be used, for example, to provide useful information about the concentration levels of these acids in different stages of the process, thus signaling possibly impending problems. In general, faster and simpler measurements are needed to meet the requirements for a reduction in fresh water usage in papermaking. Recommendations and perspectives  Compared to the conventional methods used for this purpose, the main benefits of the method are rapidity of measurement, simplicity of use, and absence of the need for multistage sample treatments (short analysis time). For this reason, this online method is more suitable for the control of papermaking by analyzing the concentration levels of interfering substances (i.e., selected resin and fatty acids) than an offline analysis detailing all the individual extractives-based compounds in process streams. It is also obvious that the technique can easily be modified for other environmental pollutants as well.     

Biodegradation behavior of agricultural pesticides in anaerobic batch reactors

This study explored the biodegradation potential of two agricultural pesticides (2,4-D and isoproturon) as well as their effect on the performance of the anaerobic digestion process. Three 3.5 L batch reactors were used, having the same initial isoproturon concentration (25 mg/L) and different 2,4-D concentrations (i.e. 0, 100, or 300 mg/L, respectively). All systems were fed with equal amounts of primary sludge and digested sludge and operated at the low mesophilic range (32 ± 2°C). Following an acclimation period of approximately 30 days, complete 2,4-D removal was achieved, whereas isoproturon biodegradation was practically negligible. The presence of 2,4-D did not have a direct effect on acidogenesis since soluble organic carbon [expressed either as volatile fatty acids (VFAs) or as total organic carbon (TOC)] peaked within the first 10 days of operation in all bioreactors. Utilization of VFAs however appeared to follow two distinct patterns: one pattern was represented by acetate and butyrate (i.e. no acid accumulation) while the other was followed by propionate, isobuturate, valerate and isovalerate (i.e. acid accumulation, duration of which was related to the initial 2,4-D concentration). On the whole, all reactors exhibited a successful digestion performance demonstrated by complete VFAs utilization, considerable gas production (containing 45 to 65% methane by volume), substantial volatile suspended solids (VSS) reduction (42 to 50%), as well as pH and alkalinity recovery.     

Effects of fulvic acid concentration and origin on photodegradation of polycyclic aromatic hydrocarbons in aqueous solution: Importance of active oxygen

With an Xe arc lamp house as simulated sunlight, the influences of fulvic acid (FA) concentration and origins on photodegradation of acenaphthene, fluorine, phenanthrene, fluoranthene and pyrene in aqueous solution have been studied. Similar effects of FAs, collected from five places around China, on polycyclic aromatic hydrocarbon (PAH) photodegradation have been observed. Active oxygen was of significance in PAH photodegradation with the presence of FAs. For systems with 1.25 mg L⁻¹ FAs, the contributions of OH to PAH photodegradation rates were from 33% to 69%. FAs had two opposite effects, i.e., stimulating the generation of active oxygen and advancing PAH photodegradation; competing with PAHs for energy and photons and restraining PAH photodegradation. Generally, photodegradation rates of the 5 PAHs decreased with the increase of FAs concentration; except fluoranthene and pyrene were advanced in solutions with low FA concentration. The influences of FA concentration on PAH photodegradation were more significant than FA origin.     

Monofluorinated analogues of polychlorinated biphenyls (F-PCBs): synthesis using the Suzuki-coupling, characterization, specific properties and intended use

An improved method, a palladium-catalyzed cross-coupling reaction the so-called Suzuki-coupling, was used to synthesize 19 monofluorinated analogues (F-PCBs) of polychlorinated biphenyls (PCBs), including analogues of PCBs 28, 52 and 81. The coupling of chlorinated and/or fluorinated isomers of aryl boronic acids with bromo- and/or iodobenzenes gave the desired F-PCB congeners in good to excellent yields. The self-coupling product of the aryl boronic acids was the major impurity, but this limitation could be minimized. The influence of ortho-substitution by chlorine on the reaction time was studied in detail. The F-PCBs were characterized by means of ¹H and ¹⁹F NMR and mass spectrometry (MS). F-PCBs show remarkably similar characteristics in many aspects to those of the corresponding non-fluorinated parent PCBs. Since fluorine is generally resistant to degradation, once incorporated into a substrate it functions as an indelible label that can be used to monitor structures and dynamics. F-PCBs may prove their usefulness as markers and tracers in mechanistic and toxicological studies. The aim of further research will be to test the suitability of fluorine as a sensitive probe in a broad range of applications, including synthesis, analytical, mechanistic and toxicological studies.     

Fish products available in Polish market – Assessment of the nutritive value and human exposure to dioxins and other contaminants

Chemical analyses were performed on one hundred and twenty of the most popular varieties of fish products (smoked fish, salted fish, and marinated fish) of the fish market in Poland. The contents of the nutritive substances of fish products (protein, micro- and macronutrients, vitamins A₁, D₃, E, and fatty acids) and the chosen contaminant (toxic metals – mercury, cadmium, lead, arsenic; dioxin/furans – PCDDFs; dioxin-like PCB – dl-PCBs; seven congeners of polybrominated diphenyl ethers – PBDEs; organochlorine pesticides – ΣDDT, HCB, ΣHCH and marker polychlorinated biphenyls – PCB₇) levels were determined. It was confirmed that fish products are a good source of digestible proteins, iodine, selenium, and vitamin D₃. The fundamental nutritive benefit of processed fish lies in its highly beneficial fatty acid composition, which is what imparts them healthy nutritive qualities. The high content of long-chain polyunsaturated fatty acids (LC-PUFAs), which is not noted in other food products, is particularly important.The majority of contaminants studied were present in low levels. The possible threats, particularly in the case of pregnant/nursing women and young children, can pose the levels of dioxin/furans (PCDD/Fs) and dioxin-like (dl-PCBs) in smoked Baltic salmon and smoked sprat, elevated in a relation to particular requirements concerning the content of sum of PCDD/Fs and dl-PCBs in fish (8 pg WHO-TEQ g⁻¹).The health benefits and risks stemming from consumption of fish products were determined according to the Provisional Tolerable Weekly Intake (PTWI) for chosen contaminants (Cd, Hg, As, PCDD/Fs + dl-PCB) and the quantity of ingredients that render a fish diet healthy based on data from the EFSA Journal [EFSA (European Food Safety Authority), 2005. Opinion of the scientific panel on contaminants in the food chain on a request from the European Parliament related to the safety assessment of wild and farmed fish. EFSA J. 236, 1–118]. In regard of high content of LC-PUFAa and other nutritive ingredients, fish products available in Polish market may be considered as healthy food.However, many authors point at contaminants (methylmercury, PCDD/Fs) occurring in fish and fish products as on potential health problem, and emphasize that the amount of that hazardous substances should be limited in human diet.     

The effect of copper ions on the lipid composition of subcellular membranes in Hydrilla verticillata

The paper studies changes in the content and composition of lipids in the membranes of chloroplasts, mitochondria and microsomes of the aquatic plant Hydrilla verticillata exposed to copper ions (100 μM; 1, 3, 6 and 24 h). The rate of copper accumulation and the coefficient of its extraction by the plant were also determined. The presence of copper in the incubation medium and its accumulation in the plant tissues decreased the content of photosynthetic pigments, stimulated lipid peroxidation and enhanced membrane permeability. The gradual accumulation of copper in the plant tissues was accompanied by specific changes in the composition of lipids: the content of sulfolipids (SQDG) in chloroplasts declined; the content of monogalactosyl diacylglycerols (MGDG), digalactosyl diacylglycerols (DGDG) and phosphatidyl glycerols (PG) in chloroplasts and mitochondria grew after an hour of copper exposure; and the content of all the lipids except phosphatidic acids (PA) decreased after 3 h of exposure. The decline in the content of phosphatidyl cholines (PC) was first observed in the membranes of microsomes (after an hour of exposure) and later in the membranes of chloroplasts and mitochondria (after 3-6 h of exposure). The experiments with incorporation of [2-¹⁴C]sodium acetate into fatty acids of polar lipids showed that in parallel with lipid destruction, there took place an intensive and specific renewal of the lipid pool of subcellular membrane fractions.     

饮用水消毒副产物--卤乙酸的检测

卤乙酸是饮用水氯化消毒中一类主要的消毒副产物,由于存在的广泛性和潜在的健康危害,许多国家和卫生组织相继将其列为饮用水常规监测项目,而我国至今还没有相关规定;为了更好地控制饮用水中卤乙酸的形成,世界各国科研人员先后研究和开发出了性能逐趋完善的多种分析检测方法;本文在国内外文献调研的基础上,对卤乙酸的各种分析检测方法进行了简要的介绍,并指明了今后的发展方向.     

腐殖酸对土壤铅镉吸附、赋存形态及生物可给性的影响

腐殖酸（HAs）对重金属土壤环境行为及其生物有效性的影响与其组分分子量大小关系密切.通过3种in vitro试验方法（PBET、SBRC、IVG）探讨了HAs不同分子量组分（F1：<5kDa、F2：5~10kDa、F3：10~30kDa、F4：>30kDa）对土壤镉（Cd）、铅（Pb）生物可给性的影响,同时结合批量等温吸附实验、化学连续提取形态分级方法,分析了土壤Cd、Pb吸附和形态转化与生物可给性的关系.结果表明：土壤对Cd、Pb吸附能力既受HAs添加量的影响,也受到HAs分子量大小的影响.HAs添加量为0.2% C~1% C条件下,<5kDa分子量组分促进了土壤对Cd、Pb的吸附,且随着HAs添加量的增加,促进作用更强.而>10kDa的其他组分则降低了土壤吸附Cd、Pb的能力.在本试验HAs添加量范围内,不同组分均促进了土壤中酸提取态Cd向残渣态转化,且低分子量组分对其促进作用更强.土壤Pb²⁺主要以可还原态的形式存在,占57%~89%,随着HAs组分分子量的增加,酸交换态Pb占比逐渐下降,HAs的添加促进了活性态Pb向难利用态Pb转化,从而降低了Pb²⁺活性.3种in vitro方法生物可给性测定结果表明,<5k和5~10k组分均提高了胃、肠阶段土壤Cd、Pb生物可给性（BA_Cd、BA_Pb）,而其余组分则使土壤Cd、Pb生物可给性降低.Cd、Pb生物可给性取决于Cd、Pb在土壤中转化平衡后的赋存形态,酸交换态占比高生物可给性相应也越高,土壤对重金属的吸附固定难以反映生物可给性.     

硫酸根自由基预处理剩余污泥产酸效能与机理

为了优化最适宜的预处理条件,探究了不同高铁酸钾（PF）亚硫酸钠（Na₂SO₃）投加量对污泥EPS剥离和有机物转化短链脂肪酸（SCFAs）的贡献情况.结果表明,Fe（VI）/S（IV）联合预处理对污泥结构,尤其是紧密附着层EPS有较强的分解作用.当PF/Na₂SO₃的物质的量比从0/1（单独Na₂SO₃组）增加至2/3时,SCFAs的最高产量由1169.5mg COD/L增加到4796.9mg COD/L（第4d）,是单独Na₂SO₃和PF实验组的4.5和1.6倍.同时,当PF/Na₂SO₃物质的量比为2/3时,溶解性糖类和蛋白质释放量达到最大值,分别为260.1和2212.2mg COD/L.因此,适宜剩余污泥发酵产酸的最佳PF/Na₂SO₃物质的量比为2：3.基于本研究结果,结合传统厌氧发酵各个阶段,阐明了Fe（VI）/S（IV）强化污泥产酸的机理,为采用基于SO₄^·-的高级氧化方法强化污泥发酵产酸技术的应用提供了理论基础.