Volatile organic compounds at swine facilities: A critical review

Volatile organic compounds (VOCs) are regulated aerial pollutants that have environmental and health concerns. Swine operations produce and emit a complex mixture of VOCs with a wide range of molecular weights and a variety of physicochemical properties. Significant progress has been made in this area since the first experiment on VOCs at a swine facility in the early 1960s. A total of 47 research institutions in 15 North American, European, and Asian countries contributed to an increasing number of scientific publications. Nearly half of the research papers were published by U.S. institutions.Investigated major VOC sources included air inside swine barns, in headspaces of manure storages and composts, in open atmosphere above swine wastewater, and surrounding swine farms. They also included liquid swine manure and wastewater, and dusts inside and outside swine barns. Most of the sample analyses have been focusing on identification of VOC compounds and their relationship with odors. More than 500 VOCs have been identified. About 60% and 10% of the studies contributed to the quantification of VOC concentrations and emissions, respectively. The largest numbers of VOC compounds with reported concentrations in a single experimental study were 82 in air, 36 in manure, and 34 in dust samples.The relatively abundant VOC compounds that were quantified in at least two independent studies included acetic acid, butanoic acid (butyric acid), dimethyl disulfide, dimethyl sulfide, iso-valeric, p-cresol, propionic acid, skatole, trimethyl amine, and valeric acid in air. They included acetic acid, p-cresol, iso-butyric acid, butyric acid, indole, phenol, propionic acid, iso-valeric acid, and skatole in manure. In dust samples, they were acetic acid, propionic acid, butyric acid, valeric acid, p-cresol, hexanal, and decanal. Swine facility VOCs were preferentially bound to smaller-size dusts.Identification and quantification of VOCs were restricted by using instruments based on gas Chromatography (GC) and liquid chromatography (LC) with different detectors most of which require time-consuming procedures to obtain results. Various methodologies and technologies in sampling, sample preparation, and sample analysis have been used. Only four publications reported using GC based analyzers and PTR-MS (proton-transfer-reaction mass spectrometry) that allowed continuous VOC measurement. Because of this, the majority of experimental studies were only performed on limited numbers of air, manure, or dust samples. Many aerial VOCs had concentrations that were too low to be identified by the GC peaks.Although VOCs emitted from swine facilities have environmental concerns, only a few studies investigated VOC emission rates, which ranged from 3.0 to 176.5 mg d⁻¹ kg⁻¹ pig at swine finishing barns and from 2.3 to 45.2 g d⁻¹ m⁻² at manure storages. Similar to the other pollutants, spatial and temporal variations of aerial VOC concentrations and emissions existed and were significantly affected by manure management systems, barn structural designs, and ventilation rates.Scientific research in this area has been mainly driven by odor nuisance, instead of environment or health concerns. Compared with other aerial pollutants in animal agriculture, the current scientific knowledge about VOCs at swine facilities is still very limited and far from sufficient to develop reliable emission factors.     

Fish products available in Polish market – Assessment of the nutritive value and human exposure to dioxins and other contaminants

Chemical analyses were performed on one hundred and twenty of the most popular varieties of fish products (smoked fish, salted fish, and marinated fish) of the fish market in Poland. The contents of the nutritive substances of fish products (protein, micro- and macronutrients, vitamins A₁, D₃, E, and fatty acids) and the chosen contaminant (toxic metals – mercury, cadmium, lead, arsenic; dioxin/furans – PCDDFs; dioxin-like PCB – dl-PCBs; seven congeners of polybrominated diphenyl ethers – PBDEs; organochlorine pesticides – ΣDDT, HCB, ΣHCH and marker polychlorinated biphenyls – PCB₇) levels were determined. It was confirmed that fish products are a good source of digestible proteins, iodine, selenium, and vitamin D₃. The fundamental nutritive benefit of processed fish lies in its highly beneficial fatty acid composition, which is what imparts them healthy nutritive qualities. The high content of long-chain polyunsaturated fatty acids (LC-PUFAs), which is not noted in other food products, is particularly important.The majority of contaminants studied were present in low levels. The possible threats, particularly in the case of pregnant/nursing women and young children, can pose the levels of dioxin/furans (PCDD/Fs) and dioxin-like (dl-PCBs) in smoked Baltic salmon and smoked sprat, elevated in a relation to particular requirements concerning the content of sum of PCDD/Fs and dl-PCBs in fish (8 pg WHO-TEQ g⁻¹).The health benefits and risks stemming from consumption of fish products were determined according to the Provisional Tolerable Weekly Intake (PTWI) for chosen contaminants (Cd, Hg, As, PCDD/Fs + dl-PCB) and the quantity of ingredients that render a fish diet healthy based on data from the EFSA Journal [EFSA (European Food Safety Authority), 2005. Opinion of the scientific panel on contaminants in the food chain on a request from the European Parliament related to the safety assessment of wild and farmed fish. EFSA J. 236, 1–118]. In regard of high content of LC-PUFAa and other nutritive ingredients, fish products available in Polish market may be considered as healthy food.However, many authors point at contaminants (methylmercury, PCDD/Fs) occurring in fish and fish products as on potential health problem, and emphasize that the amount of that hazardous substances should be limited in human diet.     

Formation of recycled plastics from depolymerized monomers derived from waste fiber-reinforced plastics

To develop a new method for the chemical recycling of plastics, we examined the formation of recycled polymers from the recovered monomeric materials of solubilized waste fiber-reinforced plastics (FRP) under supercritical alcoholic conditions. Treatment of waste FRP with supercritical MeOH resulted in the formation of monomeric organic compounds that mainly contained dimethyl phthalate (DMP) and propylene glycol. The presence of these materials was confirmed by gas chromatography and nuclear magnetic resonance analyses and they were mixed with new DMP and glycols in various ratios to form unsaturated polyesters. The polymerization progressed successfully for all mixing ratios of the recovered and new DMP. Hardness tests on these recycled polymers indicated that the polymer made from a 1:1 mixture of recovered and new dimethyl phthalate had almost the same level of hardness as the polymers made from new materials. We also examined the formation of recycled FRP by using glass fibers and monomeric materials recovered through the present depolymerization method. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Biosynthesis of polyhydroxyalkanoate by Gamma proteobacterium WD-3 from volatile fatty acids

The production of copolymers of poly-β-hydroxyalkanoates (PHA) is generally a high cost process. To reduce the production costs, inexpensive carbon sources such as volatile fatty acids (VFAs) from acidified wastewater can be used. Therefore, isolation of bacterial strains that can produce PHA copolymers using VFAs as a sole carbon source would be a beneficial alternative. In this study, a strain of PHA accumulating bacterium was isolated from the wastewater treatment plant of a soybean processing facility in Harbin. The strain was identified as γ-proteobacterium according to its 16S rDNA information and was originally named as strain WD-3. The strain accumulated a mass of PHA up to 45% of its dry cell weight when it was cultured under the optimum fermentation condition in this study when butyrate was used as the carbon source. In addition, WD-3 could synthesize PHA copolymers of poly-hydroxybutyrate and poly-hydroxyvalerate (PHV) either from C-even substrates or from C-odd substrates, and one-third of the copolymer was PHV. Results from this study demonstrated that small molecule organic acids can be used by the strain of WD-3 as the carbon source for growth and PHA production. The maximum PHA yield in the study was 0.45 g g⁻¹ dry cell.     

Low to negligible photoactivity of lake-water matter in the size range from 0.1 to 5 μm

We found that the photochemical generation of reactive transients such as singlet oxygen and triplet states upon irradiation of different lake water samples is mostly accounted for by components smaller than 0.10 μm. Larger components often showed a much lower absorption and/or scattering of radiation compared with the smaller ones, with one exception where the minor to negligible photochemical activity of larger species was associated with significant radiation absorption/scattering. It is also shown that filtration of the lake water samples at 0.10 μm was able to effectively remove the suspended particles, differently from the usually suggested filtration at 0.45 μm.     

Study of fuel oxygenates solubility in aqueous media as a function of temperature and tert-butyl alcohol concentration

Methyl tert-butyl ether (MTBE) is the most widely used oxygenate in gasoline blending and has become one of the world’s most widespread groundwater and surface water pollutants. Alternative oxygenates to MTBE, namely ethyl tert-butyl ether (ETBE), tert-amyl ether (TAME) and diisopropyl ether (DIPE) have been hardly studied yet. The solubility of these chemicals is a key thermodynamic information for the assessment of the fate and transport of these pollutants. This work reports experimental data of water solubility at the range from 278.15 to 313.15 K and atmospheric pressure of ethers used in fuels (MTBE, ETBE, TAME and DIPE) due to the strong influence of temperature on its trend. From the experimental data, temperature dependent polynomials were fitted, thermodynamic parameters were calculated and theoretical models were used for prediction. Finally, the tert-butyl alcohol (TBA) influence in the solubility of MTBE and ETBE in aqueous media was studied.     

臭氧氧化及其他强化技术协同降解聚乙烯醇

采用O₃氧化降解水中聚乙烯醇（PVA）,考察了O₃氧化的影响因素及与其他强化技术协同下的降解效果。结果表明,经12 min处理,O₃/超声波、O₃/紫外光协同作用下PVA降解率较直接O₃氧化的63.2%有显著提高,表现出了良好的协同效应。通过比较酸性条件下添加不同量Fenton试剂的作用效果可知,·OH的氧化作用是PVA降解的重要原因。     

Simplified creation of polyester fabric supported Fe-based MOFs by an industrialized dyeing process: Conditions optimization, photocatalytics activity and polyvinyl alcohol removal

MIL-53(Fe) was successfully prepared and deposited on the surface carboxylated polyester (PET) fiber by an optimized conventional solvothermal or industrialized high temperature pressure exhaustion (HTPE) process to develop a PET fiber supported MIL-53(Fe) photocatalyst ([email protected]) for the degradation of polyvinyl alcohol (PVA) in water under light emitting diode (LED) visible irradiation. On the basis of several characterizations, [email protected] was tested for the photocalytic ability and degradation mechanism. It was found that temperature elevation significantly enhanced the formation and deposition of MIL-53(Fe) with better photocatalytic activity. However, higher temperature than 130°C was not in favor of its photocatalytic activity. Increasing the number of surface carboxyl groups of the modified PET fiber could cause a liner improvement in MIL-53(Fe) loading content and photocatalytic ability. High visible irradiation intensity also dramatically increased photocatalytic ability and PVA degradation efficiency of [email protected] Na₂S₂O₈ was used to replace H₂O₂ as electron acceptor for further promoting PVA degradation in this system. [email protected] prepared by HTPE process showed higher MIL-53(Fe) loading content and slightly lower PVA degradation efficiency than that prepared by solvothermal process at the same conditions. These findings provided a practical strategy for the large-scale production of the supported MIL-53(Fe) as a photocatalyst in the future.