活性炭膜处理工业废水的试验研究

将活性炭膜与常规弹性材料同时作为生物接触氧化处理工艺的填料,分别加装在相同条件的两套接触氧化池中,采用生物接触氧化处理工艺,在同样的条件下处理工业废水,经过对试验数据的对比分析得出:以活性炭膜为填料,处理废水的能力更强,净化效果更好。     

从废感光胶片中回收银

研究了以Fe3 -乙二胺四乙酸二钠-N a2S2O3体系为浸取剂从废感光胶片中回收银的方法,考察了浸出银的最佳工艺条件。实验表明,当浸取剂中FeC l3.6H2O质量浓度为35g/L、N a2S2O3.5H2O质量浓度为150g/L、pH为7、固液质量比为3∶10时,浸取剂可重复使用6次,胶片上银的浸出率可达99%以上;浸取液中的银采用硼氢化钠还原回收,粗银粉配以熔剂高温熔炼可得到纯度达99.78%的银,银回收率达96.88%,回收银后的浸取液可循环使用。     

Mechanical Properties with the Functional Group of Additives for Starch/PVA Blend Film

This paper deals with the mechanical properties and degree of swelling (DS) of starch/PVA blend film with the functional groups i.e., hydroxyl and carboxyl group, of additives. Starch/PVA blend films were prepared by using the mixing process. Glycerol (GL) with 3 hydroxyl group, sorbitol (SO) with 6 hydroxyl group, succinic acid (SA) with 2 carboxyl group, malic acid (MA) with 1 hydroxyl and 2 carboxyl group, tartaric acid (TA) with 2 hydroxyl and 2 carboxyl group and citric acid (CA) with 1 hydroxyl and 3 carboxyl group were used as additives. The results of measured tensile strength (TS) and elongation (%E) verified that both hydroxyl and carboxyl group as a functional groups increased the flexibility and strength of the film. Values of DS for GL-added and SA-added films were low. However, DS values of the films added MA, TA or CA with both hydroxyl and carboxyl group were comparatively high. When the film was dried at low temperature, the properties of the films were evidently improved. The reason is probably because the hydrogen bonding was activated at low temperature.     

燃煤工业锅炉SO2污染防治技术的选择及评价--中国燃煤工业锅炉SO2污染综合防治对策(八)

论述了中国燃煤工业锅炉SO2污染防治技术的选择及评价，其中主要包括：《中国燃煤工业锅炉SO2污染综合防治对策》的产生、主要内容、特点、选择、评价及其实施的意义。     

高速公路路基设计参数对车辆运行品质的影响

车辆—路基耦合而产生振动 ,为了更好地分析两者之间的相互作用 ,笔者提出了车辆—路基竖向耦合振动模型 ;并利用该耦合振动模型及二维有限元方法 ,探讨了高速公路不同路基设计参数对车辆运行品质的影响规律。研究结果表明 :路基刚度的变化对车辆竖向振动加速度的影响较大 ;路面平整度与车辆竖向振动加速度几乎成线性关系 ;随行车速度的增加车辆的舒适度将降低。     

Mechanical and Barrier Properties of Biodegradable Films Made from Chitosan and Poly (Lactic Acid) Blends

Biodegradable film blends of chitosan with poly(lactic acid) (PLA) were prepared by solution mixing and film casting. The main goal of these blends is to improve the water vapor barrier of chitosan by blending it with a hydrophobic biodegradable polymer from renewable resources. Mechanical properties of obtained films were assessed by tensile test. Thermal properties, water barrier properties, and water sensitivity were studied by differential scanning calorimeter analysis, water vapor permeability measurements, and surface-angle contact tests, respectively. The incorporation of PLA to chitosan improved the water barrier properties and decreased the water sensitivity of chitosan film. However, the tensile strength and elastic modulus of chitosan decreased with the addition of PLA. Mechanical and thermal properties revealed that chitosan and PLA blends are incompatible, consistent with the results of Fourier transform infrared (FTIR) analysis that showed the absence of specific interaction between chitosan and PLA.     

云天化3#循环流化床锅炉项目技术经济分析

云天化股份公司在2004年建造了3#循环流化床锅炉，以煤代气。它可以缓解公司原料天然气的紧张状况，并能带来很大的经济效益。从技术经济的角度对该项目的技术先进性、可靠性及内部收益率、投资回收期、净现值等技术指标进行了分析。     

炼油污水的深度处理

对炼油污水深度处理常用技术——过滤、膜分离、化学氧化技术进行了详细的论述，并结合中试试验，对动态砂滤系统、PAN膜处理系统和高级氧化系统处理炼油厂二级排放水的适用性进行了论证。     

厌氧-好氧一体化反应器处理高浓度有机废水的运行特性研究

本实验采用新型厌氧—好氧一体化反应器处理高浓度有机废水,主要研究了系统的启动与运行性能,并对系统的NH3 N去除效果作了初步考察。实验结果表明:在16℃～24℃的自然温度下,采用递增负荷、厌氧和好氧分期启动的方式,系统可在38天内达到较好的启动效果;在系统负荷运行期内,当系统总进水COD浓度平均值为3601 8mg/L,总出水COD浓度平均值为384 0mg/L,系统容积负荷平均值为2 54kgCOD/(m3·d),系统总HRT平均值为35 1h时,系统总COD去除率平均值达90 6%。实验还发现:当进水NH3 N浓度为280 3～350 7mg/L,整个系统的NH3 N去除率在68 5%～91 7%,平均为81 0%。由此说明,本反应器具有很好的COD去除性能和NH3 N去除效果,适合于处理COD浓度高且含有中等NH3 N浓度的有机废水。     

生物滴滤塔处理氯苯废气的工艺性能

将活性污泥培养及驯化后接种于生物滴滤塔中，挂膜启动后处理模拟氯苯废气（简称氯苯废气），考察了生物滴滤塔在挂膜启动阶段及稳定运行阶段的性能。实验结果表明：接种41 d后生物滴滤塔成功挂膜，此时氯苯去除率稳定在90%以上；生物滴滤塔稳定运行阶段，随着进气中氯苯质量浓度由303.82 mg/m³逐渐增至1 489.05 mg/m³，氯苯去除率从85.1%降至70.1%。处理氯苯废气适宜的工艺条件为：空塔停留时间超过45 s，喷淋液流量31.8 mL/min，氯苯负荷23.97~128.01 g/（m³·h）。生物滴滤塔对喷淋液的酸性环境有较好的适应性，喷淋液pH的变化对氯苯去除率无显著影响。