星形大分子液晶在气相色谱分析中的应用研究

将首次合成的偶氮苯硅氧烷类星形液晶大分子化合物用于毛细管柱气相色谱固定液 ,在其相转变温度附近具有良好的选择性 ,成功地分离了二甲酚异构体。     

空气和废气监测中H2S标液的选择

有2种不同方法制备的H2S标准溶液进行测定，结果表明，所得标准曲线斜率一致，因此，在实际工作中可对其灵活运用。     

垃圾填埋场稳定化及其研究现状

文章对直埋场稳定化过程进行了初步描述，并从填埋气、渗滤液、垃圾组成和沉降等４个方面总结了填埋场稳定化的研究现状。     

优质稻的穗肥施用技术研究

优质稻田间穗肥试验表明,在叶色转赤的基础上,施穗肥一般以复合肥112.5~150.0 kg/hm2加氯化钾37.5 kg/km2为宜; 施穗肥比不施穗肥增产10.7%~15.5%。施穗肥的效果还与肥料中的氮钾比例有关,N∶K2O以1∶0.7~1.0较适宜。     

长江沉积物中痕量氯代酚类化合物的测定

本文利用同位素稀释质谱法对长江南京段沉积物中１８种氯代酚进行了分离鉴定，结果表明，沉积物中ＣＰｓ的含量以五氯苯酚为主，     

Small cetacean bycatch as estimated from stranding schemes: The common dolphin case in the northeast Atlantic

Death in fishing gear of non-target species (called ‘bycatch’) is a major concern for marine wildlife, and mostly worrying for long-lived species like cetaceans, considering their demographic characteristics (slow population growth rates and low fecundity). In European waters, cetaceans are highly impacted by this phenomenon. Under the Common Fishery Policy, the EC 812/2004 regulation constitutes a legal frame for bycatch monitoring on 5–10% of fishing vessels >15 m. The aim of this work was to compare parameters and bycatch estimates of common dolphins (Delphinus delphis) provided by observer programmes in France and UK national reports and those inferred from stranding data, through two approaches. Bycatch was estimated from stranding data, first by correcting effectives from drift conditions (using a drift prediction model) and then by estimating the probability of being buoyant. Observer programmes on fishing vessels allowed us to identify the specificity of the interaction between common dolphins and fishing gear, and provided low estimates of annual bycaught animals (around 550 animals year⁻¹). However, observer programmes are hindered by logistical and administrative constraints, and the sampling scheme seems to be poorly designed for the detection of marine mammal bycatches. The analyses of strandings by considering drift conditions highlighted areas with high levels of interactions between common dolphins and fisheries. Since 1997, the highest densities of bycaught dolphins at sea were located in the southern part of the continental shelf and slope of the Bay of Biscay. Bycatch numbers inferred from strandings suggested very high levels, ranging from 3650 dolphins year⁻¹ [2250–7000] to 4700 [3850–5750] dolphins year⁻¹, depending on methodological choices. The main advantage of stranding data is its large spatial scale, cutting across administrative boundaries. Diverging estimates between observer programmes and stranding interpretation can set very different management consequences: observer programmes suggest a sustainable situation for common dolphins, whereas estimates based on strandings highlight a very worrying and unsustainable process.     

生物滤池对气相与液相中污染物质的净化

通过实验室研究探讨了生物滤池同时处理废水和废气的可行性。试验结果表明：在２５℃－３７℃条件下，甲苯废气的流量为９０Ｌ／ｈ，甲苯浓度为５００ｍｇ／ｍ＾３；废水的流量为０．４Ｌ／ｈ，ＣＯＤｃｒ浓度为４００－７５０ｍｇ／Ｌ，甲苯与ＣＯＤｃｒ的去除率分别是７０％－７２％和８６％－８９％。     

Biospheric influence on carbon dioxide measurements in Italy

The study concerning carbon dioxide measurements taken during the 1997, 1998 and 1999 summer campaigns at two different altitude stations and biospheric conditions are presented. The higher station (Mt. Cimone, 2165 m a.s.l.) is characterised by 360° free horizon and is located on a rocky mountain while the lower (Ninfa lake, 1550 m a.s.l.) is located inside the red spruce and beech forest. The different behaviour of CO₂ at the two mountain stations has been registered. It shows the strong effect of nighttime soil emission and vegetation respiration on CO₂ mixing ratio increases and of diurnal vegetative activity on CO₂ concentration decreases at the lower measurement site. The baseline character of the higher measurement site has been confirmed by comparison of CO₂ diurnal amplitudes recorded at the two stations.     

甲烷气体标准样品的研制

对称量制备甲烷气体标准样品的制备方法进行了详细研究 ,对可能引起甲烷量值不确定度的各种误差来源进行了分析。文中提出的甲烷气体标准样品制备方法具有很好的重现性 ,所制备的甲烷气体标准样品具有良好的压力稳定性并已能在三种气瓶中稳定保存 1 8个月 ,其量值准确、可比 ,并已在全国环境监测网试用。     

GC-PID联用直接测定大气中痕量烃类化合物

作者把气相色谱仪(GC)与自行研制的光离子化检测器(PID)联用,实现了大气中痕量烃类化合物的直接测定,给出了仪器的构成和性能指标及测量结果.