不同好氧预处理方式对餐厨垃圾产甲烷的影响

为了研究不同好氧预处理方式对餐厨垃圾厌氧消化产甲烷的影响,通过建立3个模拟厌氧生物反应器,研究了传统厌氧生物反应器C1、上层好氧预处理-厌氧生物反应器C2和底部好氧预处理-厌氧生物反应器C3 3种不同操作条件下的产甲烷过程.结果表明,挥发性有机酸的累积使C1始终处于产甲烷滞后阶段;而C2、C3的好氧预处理通过加快易水解酸化组分和过量挥发性有机酸的好氧降解,有效缓解了酸性抑制,产甲烷滞后时间明显缩短至10 d内.第32天C2停止上层曝气后,在27 d内甲烷浓度达到了50％以上,同时,产甲烷速率迅速上升,并在第81天可达到峰值773 mL/(kg·d).C3在第11天停止底部曝气后,虽然经过22 d的时间甲烷浓度即上升至50％,但之后产甲烷速率经历回落阶段后再次逐渐上升,在实验结束时仅达到517 mL/(kg·d).上层曝气的好氧预处理方式所需曝气时间相对较长,但其产甲烷启动快,与底部曝气相比,其后期的甲烷化过程更稳定并可达到较高的产甲烷速率.     

曝气条件对浸没式膜生物反应器内流场的影响

为深入研究流场动力学特性对浸没式膜生物反应器系统内膜面污染的控制,应用fluent软件对浸没式膜生物反应器内气液两相流动进行了三维数值模拟研究。采用标准k-ε湍流模型和欧拉多相流模型,考察了改变曝气条件对膜面气液速度场及气含率分布的影响。模拟结果表明,在相同曝气强度下,1 mm曝气孔径下膜面气液两相的速度增加较孔径2mm、3 mm的快;曝气孔径为1 mm时,膜面的液相速度随着曝气强度的增加逐渐增大;曝气孔径为1 mm时,曝气量为5.5m3/h所形成的漩涡区较大,膜面气含率值较高且分布较均匀,气液两相接触面积较大,膜面冲刷效果较好;模拟观察到反应器底部靠近壁面局部气含率较低,不利于活性污泥中微生物的生长,需要进一步优化曝气和反应器结构。     

人工接种堆肥和自然堆肥微生物区系与分子多态性的变化

采用传统培养方法和PCR-DGGE技术研究了人工接种堆肥和自然堆肥微生物群落的演变过程。结果表明:(1)传统培养方法显示,两种堆肥堆制过程中微生物数量均呈“升高—降低—升高—降低”变化趋势,整个堆肥过程中细菌数量占优势。(2)DGGE图谱显示,两种堆肥不同时期存在不同的细菌种群,其条带数量亦呈“升高—降低—升高—降低”变化趋势。堆肥升温期条带丰富但优势条带不明显;堆肥高温期条带数量减少但出现优势条带,表明高温阶段以嗜热菌或耐高温菌为主;堆肥降温期条带数量再次增多;堆肥腐熟期条带数量少且无优势条带,表明腐熟阶段微生物种群数量少且代谢强度趋于平缓。(3)DGGE图谱表明,人工接种菌株成为堆肥高温期优势菌株。人工接种增加了堆肥中微生物总量,提高了堆肥微生物种群多样性,并且促进了堆肥菌群演替,从而缩短堆肥腐熟时间。     

悬挂链曝气技术应用于河流污染治理

在介绍了悬挂链曝气技术的特点和在复氧曝气方面的适用性的基础上,对该技术的局限性进行了阐述,并认为悬挂链技术为河流污染治理提供了一种新选择。     

Flow Dynamics in Eccentrically Rotating Flasks Used for Dispersant Effectiveness Testing

The evaluation of dispersant effectiveness used for oil spills is commonly done using tests conducted in laboratory flasks. We used a Hot Wire Anemometer (HWA) to characterize mixing dynamics in the Swirling Flask (SF) and the Baffled Flask (BF), the latter is being considered by the EPA to replace the prior to test dispersant effectiveness in the laboratory. Five rotation speeds of the orbital shaker carrying the flasks were considered, Ω = 50, 100, 150, 175 and 200 rpm. The radial and azimuthal water speeds were measured for each Ω. It was found that the flow in the SF is, in general, two-dimensional changing from horizontal at low Ω to axi-symmetric at high Ω. The flow in the BF appeared to be three-dimensional at all rotation speeds. This indicates that the BF is more suitable for representing the (inherently) 3-D flow at sea. In the SF, the speeds and energy dissipation rates ɛ increased gradually as the rotation speed increased. Those in the BF increased sharply at rotation speeds greater than 150 rpm. At 200 rpm, the Kolmogorov scale (i.e., size of smallest eddies) was about 250 and 50 μm in the SF and BF, respectively. Noting that the observed droplet sizes of dispersed oils range from 50 to 400 μm (hence most of it is less than 250 μm), one concludes that the mixing in the SF (even at 200 rpm) is not representative of the vigorous mixing occurring at sea.     

厌氧发酵过程pH对微生物多样性和产物分布的影响

采用PCR-DGGE技术,研究了不同pH条件下蔬菜类有机垃圾厌氧发酵过程中的微生物多样性,探讨了微生物群落结构与发酵产物分布的关系.Shannon指数分析表明,pH=7和pH=8时的微生物多样性较高,随时间变化规律相似,而pH=5时的微生物多样性较低.UPGMA聚类分析和PCA分析结果也表明,pH=7和pH=8时的微生物群落结构相似,pH=5与之显著不同.在不同pH条件下的优势菌属都是乳酸细菌和梭菌。微生物多样性的变化与发酵产物分布具有一定相关性,pH通过影响微生物群落结构的变化最终影响发酵产物的分布.图4表2参27     

The geographical distribution of plant latex

Summary Latex is a widespread defence in plants against natural enemies and a literature-based summary of latex-producing angiosperms shows records in 40 families, and more than 20,000 species are estimated to bear laticiferous structures of some kind. This is considerably higher than the usually quoted figure of 12,500 species. There are more tropical than temperate latex-bearing families, both in absolute numbers and proportionally. Proportions of latex-bearing families are similar both in tropical and in more widespread or cosmopolitan families. Significantly more latex-bearing species belong to tropical than either to temperate or to widespread taxa, both in absolute and in relative terms. These differences may be related to the higher diversity of natural enemy species and to higher rates of herbivory in the tropics.     

广州城郊环境梯度下马尾松针叶元素质量分数变化特征

城市化、工业化迅速发展及人类活动的加剧给城市及其周边地区森林生态系统带来前所未有的干扰和压力。植物冠层是植物与大气直接进行气体交换的界面,冠层叶组织化学分析已成为评价环境污染对森林树木健康的影响,指示环境污染的有效手段。文章以广州黄埔工业区(丹水坑风景区)、城郊接壤区(华南植物园)和近郊(帽峰山森林公园)这一环境梯度为对象,在各研究点上选定自然生长的、成熟健康的马尾松(Pinus massonianaL.)5株,分别采集树冠中部向阳枝条上的当年生(Current,C)和一年生(Current 1,C 1)针叶,然后将每组针叶区分为带叶鞘针叶、去叶鞘针叶和叶鞘3个组分进行样本制备,测定N、Al、Cu、Cd、Pb、Zn、Cr、Ni元素质量分数,旨在探讨利用马尾松针叶不同组分的元素质量分数用于指示城郊梯度环境质量变化的适宜性和可靠性。研究结果表明:①当年生带叶鞘针叶中Al质量分数显著高于当年生去叶鞘针叶(p<0.05),其余元素在当年生和一年生的去叶鞘针叶与带叶鞘的完整针叶间均无显著差异;②Ni在当年生针叶及其叶鞘间没有显著差异(p<0.05),其它被测定的金属元素无论在当年生还是一年生针叶中,均表现为叶鞘中的元素质量分数均显著高于去叶鞘针叶(p<0.05),体现了针叶与叶鞘在形态结构上的差异引起重金属积累的差异;而非金属元素N质量分数则针叶显著高于叶鞘;③一年生针叶中Ni质量分数显著低于当年生针叶,但Al、Pb、Zn质量分数显著高于当年生针叶,一年生叶鞘中所有金属元素的质量分数都显著高于当年生叶鞘,表现出随暴露时间和针叶寿命的延长而持续累积的特征;而营养元素N质量分数在当年生针叶和一年生针叶以及当年生叶鞘和一年生叶鞘间无显著差异;④城乡环境梯度下生长的马尾松为研究环境质量演变提供了一个天然的实验室,受人类活动干扰大的城区马尾松一年生针叶的Cd和N质量分数及其叶鞘中的Cu、Cr、Ni质量分数显著高于受人为干扰较少的郊区,表明植物组织中元素化学特征反映了城市发展过程中人类活动的足迹。在城市环境尤其是重金属污染的监测中,成熟的一年生叶鞘更具指示意义,效果更显著。     

亚高山30a人工针叶林物种多样性的定量分析

探讨了川西地区不同海拔梯度上,30a亚高山人工针叶林乔,灌,草各层物种多样性的变化规律,并运用逐步多元回归分析方法,分析了不同立地条件下土壤因子与针叶林群落乔,灌,草各层物种多样性指数之间的关系,结果显示：30a人工针叶林灌木层和草本层多样性指数明显高于乔木层;随着海拔的升高,灌木层和草木层物种的多样性指数逐渐降低,在halt2700m处多样性最丰富,乔木物种多样性则呈现为“低→高→低”的变化趋势,符合“中间高度膨胀（mid-altitude bulge)模式,土壤因子对30a人工恢复针叶林多样性的影响主要是体现在灌木层和草本层的变化,而对乔木层物种多样性的影响不明显,土层厚度,土壤容重,石砾含量,枯枝落叶的贮量,CaO含量以及有机质的C／N比值等土壤因子与灌木层和草本层物种多样性之间存在线性相关关系,分层建立了物种数,Simpson指数,ShannonWiener指数,Menhinick指数以及Brillouin指数与相关土壤因子的回归模型。     

Biomass and carbon budgeting of sustainable agroforestry systems as ecosystem service in Indian Himalayas

Adoption of agroforestry is paramount as a climate change mitigation and adaptation strategy. The assessment of plant biomass is crucial for understanding the vulnerability of biological systems to climate change. In the present study, agroforestry systems viz., agrisilviculture (AS), agrihorticulture (AH), agrihortisilviculture (AHS) and agrisilvihorticulture (ASH) were investigated for biomass production and carbon stock in vegetation as well as in soil in the Indian central Himalaya along the elevation i.e. E₁ (<1100 m), E₂ (1100–1400 m), E₃ (1400–1700 m), E₄ (1700–2000 m) and E₅ (>2000 m). Mean aboveground and belowground biomass were 73.9% and 26.1%, respectively, of total biomass (64.4 t ha^?1) in agroforestry systems. Fodder and/or timber trees accounted for 31% (in AHS) to 74% (in AS) of total biomass, while fruit trees accounted for 18% (in ASH) to 73% (in AH) of total biomass. The contribution of agriculture crops to total biomass fluctuated between 19% (in ASH) and 26% (in AH). Total vegetation biomass, soil carbon and total carbon density in agroforestry systems increased significantly along the elevation, with maximum biomass at elevation E₅ (32.0 t ha^?1, 64.7 t C ha^?1 and 96.7 t C ha^?1). Total biomass of vegetation among agroforestry systems differed significantly. Soil carbon stock was highest in AHS (59.5 t C ha^?1) and total carbon density (vegetation + soil) was highest in ASH (93.0 t C ha^?1). Thus, in Indian Himalayas, vegetation biomass, carbon stock, soil and total carbon (vegetation + soil) stock increased along the elevation.

Abbrviations: AG: aboveground; BG: belowground; WD: wood density; VOB: volume over bark; BEF: biomass expansion factor; AS: agrisilviculture; AH: agrihorticulture; ASH: agrisilvihorticulture; AHS: agrihortisilviculture; E: elevation; C: carbon; CO₂: carbon-di-oxide; IPCC: Intergovernmental Panel on Climate Change; DBH: diameter at breast height; AGBD: aboveground biomass density; BGBD: belowground biomass density; GSVD: growing stock volume density