Environmental and economic assessment of a greenhouse waste heat exchange

As the economic costs of energy and the negative externalities associated with the combustion of fossil fuels threaten the economic viability of greenhouses in northern climates there is a renewed interest in the use of waste heat. This paper presents a technical and economic methodology to determine the viability of establishing waste heat greenhouses using the waste heat from industrial processes in northern climates. A case study is presented of an exchange between a tomato greenhouse and a flat glass manufacturing plant, which found the waste heat system is significantly more economic to operate than a purely natural gas system.     

小型燃煤工业锅炉NO_x形成与释放规律模拟研究

NOx是我国十二五期间重点控制的污染物,燃煤工业锅炉是其重要来源。为了研究燃煤工业锅炉NOx的形成与释放规律,在实验室模拟了不同煤种的燃烧过程。采用原煤/焦炭燃烧法分别研究挥发分氮和焦炭氮生成NOx的反应,探讨燃料型NOx的形成与释放规律,并解释试验模拟条件下燃煤NOx产污系数和现场实测值的差异。结果表明,试验中烟煤、无烟煤、煤焦的NO转化率平均值分别为25.77%,22.17%和11.98%,产污系数平均值分别为4.31,5.08和2.00kg/t,高于现场实测结果核算值。燃煤工业锅炉NOx以燃料型为主,燃料型NOx的形成和释放是一个复杂的多相反应过程,由挥发分氮的氧化还原反应和焦炭氮的氧化还原反应组成,煤种、温度、空气流量、粒径、氧含量等因素对4种反应各自影响及影响程度并不相同。     

连续流动氢化物发生原子荧光法测定水中硒

文章介绍连续流动一氢化物发生一原子荧光测定水中硒的方法,研究了盐酸浓度、硼氢化钾浓度、灯电流、光电倍增管负高压、泵速、载气和屏蔽气流量等对测定硒的影响,找出测定水中硒最佳条件,在最佳条件下,校准曲线相关系数为0.9999.方法检出限为0.0095μg/L,方法的测量范围为0.038-300μg/L,回收率在91.8%-...     

动力与热力抬升对烟气抬升高度的影响分析

通过模式选择和计算,得出烟气抬升高度的增加与动能和热能的关系,表明当烟囱出口处风速分别为3 m/s、2 m/s和1 m/s时欲增加同样大小的烟气抬升高度,需要的动能比热能要高,结论认为烟气的热力提升比动力提升的贡献大。     

Microstructure of 2205 duplex stainless steel joint in submerged arc welding by post weld heat treatment

The 2205 duplex stainless steel (DSS) is of both good properties austenitic steel and ferritic steel, which applies to the shipbuilding industry usually. In this paper, the OM, XRD and microhardness test methods are used to analyze the variation of submerged arc welded (SAW) joints with and without post weld heat treatment (PWHT). The research results show that the σ phase disappear in the fusion edge zone near heat affect zone (HAZ) and an increase in the welded center zone during the follow-up PWHT, while the amount of γ phase is decreased in the welded center zone with PWHT. A segregation distribution of some second phases is also found in the welded center zone after PWHT. There have two pick values of microhardness arise in the fusion edge zone and the welded center zone separately without PWHT. However, a maximum value of microhardness at the fusion edge zone near HAZ is disappeared and the other is still held at the welded center zone during PWHT. It can be attributed to the changes of second phases, element diffusions and particle segregation during PWHT. A developing mechanism is issued to demonstrate the second phases transferring of the 2205 DSS SAW joints by PWHT.     

Improvement of welding heat source models for TIG-MIG hybrid welding process

Tungsten inert gas-metal inert gas (TIG-MIG) hybrid welding process is an effective way to improve welding productivity and quality due to advantages of the two processes. Mathematical analysis is crucial to fundamentally understand this synergetic welding process. In this study, based on experimental visualization of arc behaviors, some assumptions are proposed to deduce adaptive plane and volumetric heat source models separately for each involved welding method first. The influence of torch angles on distribution of temperature and geometry of weld bead are calculated and compared with experimental results. It shows that this developed algorithm of heat source can be employed to accurately predict welding process whether the electrode gun is slanted backward or forward to the direction of welding. Then TIG-MIG hybrid welding process is simulated and analyzed without considering the attractive or repulsive force of two arcs. The characteristic of TIG-MIG welding process is discussed compared to single MIG. It lays the foundation for the further research on the interaction of the two arcs during TIG-MIG hybrid welding.     

居民对垃圾焚烧发电态度的实证研究——以泰安市垃圾焚烧电厂为例

基于对山东省泰安市垃圾焚烧发电厂周边居民的调查数据,运用SPSS20.0统计软件对数据进行二元Logistic回归分析,探讨垃圾焚烧发电厂周边居民对电厂态度的影响因素。实证结果表明,是否被征求意见、是否接受物质补偿这二个变量对周边居民的态度具有显著的正向影响;而受教育年限、是否知道二噁英、居住地与电厂距离与周边居民态度呈显著负相关关系。结合相关研究,发现本研究中影响电厂周边居民态度的因素既有普遍性,也有特殊性。     

微生物燃料电池处理含S2-/NH4+废水的研究

以除硫硝化微生物燃料电池(Microbial Fuel Cell,MFC)处理含S~(2-)/NH_4~+的模拟无机废水,研究了不同进水S~(2-)浓度下MFC的产电性能、污染物去除效果和阳极室硫累积情况.结果表明,除硫硝化MFC可实现同步阳极除硫和阴极硝化,并通过非生物电化学作用和生物电化学作用共同产电.进水S~(2-)浓度为(60.8±2.9)、(131.7±2.4)、(161.7±4.5)和(198.1±3.1)mg·L~(-1)时,最佳阳极碳刷清洗周期分别为3、3、3、4个换水周期,前3个进水浓度下的换水周期可分别缩短为6、8和8 h.MFC阴极硝化完全,不受进水S~(2-)浓度影响,但氧从阴极向阳极的渗漏导致阳极库仑效率较低(40%).适当增加进水S~(2-)浓度可增强MFC的产电性能并提高S~(2-)去除负荷和颗粒硫累积比.除硫硝化MFC适宜的进水S~(2-)浓度为(161.7±4.5)mg·L~(-1),相应的最大功率密度为5.77 W·m~(-3),周期产电量为(141.0±5.2)C,S~(2-)去除负荷为(0.31±0.00)g·L~(-1)·d~(-1),颗粒硫累积比达58%.阳极碳纤维丝上沉积有粒径约100 nm的颗粒硫.阳极悬浮物与沉积物相比,悬浮物中S0含量比例较高,而S6+含量比例较低.     

秸秆压块与燃煤供热系统生命周期环境排放对比研究

为证明采用秸秆压块燃料替代煤炭进行供热的可持续性,对秸秆压块和燃煤供热系统的生命周期环境排放进行了对比分析.基于我国2012年投入产出表,构建了投入产出生命周期评价(IO-LCA)和过程生命周期评价(PLCA)相结合的混合生命周期评价(Hybrid-LCA)模型,核算了玉米秸秆压块和燃煤供热系统供应1 GJ热的生命周期CO2、SO2、NOx和PM2.5排放.结果显示,秸秆压块供热系统的生命周期CO2排放量为7 kg·GJ-1热,比燃煤供热排放减少121 kg.此外,秸秆压块供热系统比燃煤供热系统可以分别减少SO2排放98%、NOx排放76%和PM2.5排放58%.控制原料水分,通过减少原料收集和能源转化过程中的耗损,减少能源转化过程的电力消耗以及控制原料收集半径等可以有效改进秸秆压块供热系统环境表现.     

城市热岛效应下浅层土中混凝土的酸腐蚀试验研究

针对城市热岛效应引起城区浅层土地温场升高这一观测结果,采用室内快速模拟试验方法,对城区酸性土壤腐蚀混凝土材料的温度效应开展了试验研究.试验研究了在温度为5℃、20℃和40℃条件下,混凝土试样在酸浓度分别为0%、5%和10%的沙土介质中放置30 d、90 d后的抗压强度变化规律,并对混凝土试样在腐蚀过程中的腐蚀系数变化规...