用差示分光光度法测定高浓度皮革废水中铬的方法探讨

介绍了应用差示分光光度法直接测定高浓度皮革废水中Cr的方法，通过与原实验方法分析结果的对比，获得了满意的结果，能基本满足环境监测的要求。     

基于模糊模式识别的模糊综合评价在高层建筑火灾危险评价中的应用

针对高层建筑火灾危险的特点,建立了高层建筑火灾危险评价的指标体系,并应用层次分析法确定了其权重。根据高层建筑火灾危险评价系统具有多因素、多层次的特点,采用模糊综合评价方法;针对模糊综合评价的不足之处,提出把权广义距离之和最小模糊模式识别运用到模糊综合评价当中,建立了基于模糊模式识别的模糊综合评价模型;该评价模型避免了单因素矩阵的确定和模糊算子的选择问题,用安全状态特征值来表征最终的评价结果,能使评价结果更加准确,可操作性强。通过对陕西某高层建筑火灾危险评价实例证明,该模型具有较好的应用价值,为日常的安全管理和性能化防火设计提供了有用依据。     

利用高温废气治理焦化酚氰污水项目实践

阐述了利用焦炉、窑炉、电厂等高温废气处理焦化污水的理论及工业实践,该工艺具有投资省、运行费用低的突出优点.     

Ammonia large scale atmospheric dispersion experiments in industrial configurations

A programme of large-scale experiments for atmospheric dispersion was carried out by INERIS over a period extending from December 1996 to April 1997. The objectives of the test campaign were to measure anhydrous ammonia concentrations in a range of few meters to 2 km from the release, in order to generate data to be used to improve 2-phase discharge and dispersion modelling.

The discharges were released from a 6-tonne storage tank of pressurised liquid ammonia and through a discharge device with an outlet diameter of 2 in. Fifteen trials were carried out with various release configurations corresponding to industrial situations (impinging jets on the ground and on a wall at various distances, release through a flange without seal…). The quantity of ammonia discharged from the liquid phase varied according to the tests, from 1.4 to 3.5 tons for durations between 7 and 14 min and, therefore, at flow rates between 2 and 4.5 kg/s. Approximately 200 sensors were settled downwind to measure ammonia concentrations and temperature in the plume. These tests showed that for discharges with identical flow rates the distances corresponding to the same concentration vary a lot according to the configurations. These distances tend to be reduced by the presence of obstacles or retention dikes that collected liquid ammonia. In the paper, the main experimental results are presented. In order to enable the comparisons with numerical predictions, more detailed information are given in [Bouet R. (1999). Ammoniac—Essais de dispersion atmosphérique à grande échelle. INERIS rapport, ref INERIS-DRA-RBo-1999-20410 (available at http://www.ineris.fr/recherches/recherches.htm).     

气浮+生物接触氧化工艺处理食品加工废水

通过气浮 生物接触氧化工艺处理速冻食品加工废水的实验、设计和工程运行,结果表明:废水COD去除率能达到97%以上,使得最终出水的COD＜100mg/l.该工艺对冲击负荷有较强的适应性.     

油田固体废弃物回注技术的可行性试验

胜利油田临盘采油厂临南油田水质改性后固体废弃物急剧增加、处理难度大,高渗储层回注的处理办法在夏52-414井开展现场试验取得成功.对其他油田的污泥处理具有参考借鉴价值.     

页岩气加砂压裂高压管汇失效爆裂风险 控制措施研究与实践

随着页岩气平台井工厂化压裂施工启动,在大排量、高压力、长时间施工条件下,高压管汇失效爆裂大幅增加。为减少高压管汇在压裂过程中失效爆裂风险,运用故障假设、因果分析法从人的因素、物的因素、技术工艺、生产管理、工作环境5个方面分析事故的原因,提出了提升采购产品质量、修订完善高压管汇使用技术规范和管理制度、实施专业化管理、应用大数据管理高压管汇、优化现场地面高压管汇流程分配布局设计与联接工艺等高压管汇失效爆裂风险预防控制措施和失效后应急安全防护措施,建立了生命周期全过程、专业化的高压管汇失效爆裂防控与应急防护体系,实现风险可防受控。为页岩气压裂作业的安全提供了参考。     

新型二氧化铅电极处理染料废水

利用高压塑片法制备掺杂镧和活性炭以及聚四氟乙烯(PTFE)的新型二氧化铅电极,采用X衍射(XRD),循环伏安曲线(CV),扫描电镜(SEM)等手段对电极性能进行表征,研究了其电催化处理有机染料废水(亚甲基蓝)的降解效果,并对反应机理进行了相关研究。研究表明,该电极具有良好的抗腐蚀能力,对亚甲基蓝具有较好的降解效果。通过与普通二氧化铅电极比较,该电极在染料脱色和去除COD方面都有较明显优势,显示出较好的工业应用前景。     

Carbon dioxide emissions from cities in China based on high resolution emission gridded data

Based on the China high resolution emission gridded data (1 km spatial resolution), this article is aimed to create a Chinese city carbon dioxide (CO₂) emission data set using consolidated data sources as well as normalized and standardized data processing methods. Standard methods were used to calculate city CO₂ emissions, including scope 1 and scope 2. Cities with higher CO₂ emissions are mostly in north, northeast, and eastern coastal areas. Cities with lower CO₂ emissions are in the western region. Cites with higher CO₂ emissions are clustered in the Jing-Jin-Ji Region (such as Beijing, Tianjin, and Tangshan), and the Yangtze River Delta region (such as Shanghai and Suzhou). The city per capita CO₂ emission is larger in the north than the south. There are obvious aggregations of cities with high per capita CO₂ emission in the north. Four cities among the top 10 per capita emissions (Erdos, Wuhai, Shizuishan, and Yinchuan) cluster in the main coal production areas of northern China. This indicates the significant impact of coal resources endowment on city industry and CO₂ emissions. The majority (77%) of cities have annual CO₂ emissions below 50 million tons. The mean annual emission, among all cities, is 37 million tons. Emissions from service-based cities, which include the smallest number of cities, are the highest. Industrial cities are the largest category and the emission distribution from these cities is close to the normal distribution. Emissions and degree of dispersion, in the other cities (excluding industrial cities and service-based cities), are in the lowest level. Per capita CO₂ emissions in these cities are generally below 20 t/person (89%) with a mean value of 11 t/person. The distribution interval of per capita CO₂ emission within industrial cities is the largest among the three city categories. This indicates greater differences among per capita CO₂ emissions of industrial cities. The distribution interval of per capita CO₂ emission of other cities is the lowest, indicating smaller differences of per capita CO₂ emissions among this city category. Three policy suggestions are proposed: first, city CO₂ emission inventory data in China should be increased, especially for prefecture level cities. Second, city responsibility for emission reduction, and partitioning the national goal should be established, using a bottom-up approach based on specific CO₂ emission levels and potential for emission reductions in each city. Third, comparative and benchmarking research on city CO₂ emissions should be conducted, and a Top Runner system of city CO₂ emission reduction should be established.     

基于高频AQI数据的关中城市群空气污染规律探索

基于高频分时AQI及各污染物浓度数据,本文使用"AQI小时指数"、首要污染物等进行统计分析并建立VAR模型对关中城市群空气污染的总体情况、日内波动规律以及城市间空气污染的关联规律做了不同层次的挖掘。研究结果表明:(1)关中城市群的空气质量整体较差,春、冬季空气污染程度明显大于夏季,空气污染的"季节效应"和"集簇性"明显,且主要表现为颗粒物污染。(2)空气质量的日内波动规律在春、冬两季表现为下半天优于上半天,夏季夜间优于白天。但在不考虑四季AQI小时指数图"相位"差异的情况下,四季空气污染的日内波动呈现出明显的相似性。(3)各城市空气污染存在明显的关联规律。城市群内一个城市空气污染的恶化会加剧其他城市的空气污染,并且对其他城市空气污染的影响峰值会在24小时之内出现,且该影响会随着空间和时间尺度的增大而逐步衰减。