The application of life cycle assessment to design

This paper explores the practical application of life cycle assessment (LCA) to product system development. While life cycle assessment methods have been studied and demonstrated extensively over the last two decades, their application to product design and development has not been critically addressed. Many organizational and operational factors limit the integration of the three LCA components (inventory analysis, impact assessment and improvement assessment) with product development. Design of the product system can be considered a synthesis of individual decisions and choices made by the design team, which ultimately shape the system's environmental profile. The environmental goal of life cycle design is to minimize the aggregate environmental impacts associated with the product system. Appropriate environmental information must be supplied to decision makers throughout each stage of the development process to achieve this goal. LCA can serve as a source of this information, but informational requirements can vary as the design moves from its conceptual phase, where many design choices are possible, to its detailed design and implementation. Streamlined approaches and other tools, such as design checklists, are essential. The practical use of this tool in product development also depends on the nature and complexity of the product system (e.g. new vs. established), the product development cycle (time-to-market constraints), availability of technical and financial resources, and the design approach (integrated vs. serial). These factors will influence the role and scope of LCA in product development. Effective communication and evaluation of environmental information and the integration of this information with cost, performance, cultural and legal criteria will also be critical to the success of design initiatives based on the life cycle framework. An overview of several of these design initiatives will be presented.     

应用地球物理方法研究撞击坑

陨石的撞击作用使靶岩形成一个特殊的地球物理场，具有低密度、低电阻率、低速度、磁力异常等不同于周边的岩性。因此，可利用重力、电法、磁法、地震等地球物理方法探测撞击坑的形态特征和寻找新的冲击构造。     

辽河流域河流栖息地评价指标与评价方法研究

建立了由底质、栖息地复杂性、速度-深度结合特性、堤岸稳定性、河道变化、河水水量状况、植被多样性、水质状况、人类活动强度和河岸土地利用类型所构成的河流栖息地评价指标体系,确定了各指标的等级划分以及栖息地综合指数的计算方法.结合2005年辽河流域河流生态调查结果,对流域内所调查的28个河段的栖息地质量状况进行了具体评价,并进一步分析了河道栖息地综合指数与河流理化因子、底栖生物以及小流域土地利用状况的相关关系.结果表明:①辽河流域28个河段的栖息地质量状况差异显著,其中10个河段达到了较好等级以上,6个仅为中等水平,12个河段为较差等级以下;②栖息地质量与理化因子、底栖生物指标具有显著相关性,表明栖息地质量是影响水质与生物状况的重要因素;③小流域的人类未利用土地比例与栖息地质量显著相关,表明小流域土地利用程度对栖息地环境质量影响较大,是恢复与保护河流栖息地质量的重要条件.     

广州地铁工程项目环境影响评价若干问题探讨

以广州地铁六号线环境影响评价为例，结合国内外开展地铁工程项目环境影响评价的经验，对地铁项目环境影响评价的指导思想、评价重点、工程污染再分析及环境影响预测与评价等若干问题进行了探讨，以期为国内地铁工程环境影响评价工作的开展提供一些参考。     

环境影响的经济评价方法与应用

简述了环境影响经济评价的程序。概述了环境影响货币化的3大类,共10种常用方法。运用人力资本法估算广州市大气污染引起的健康损害,损失达169 14亿元。     

基于3S的玉溪市土壤侵蚀敏感性评价研究

以玉溪市为研究区域，运用GIS软件对影响土壤侵蚀的因子进行叠加分析，获取玉溪市土壤侵蚀敏感性等级分布图，并与土壤侵蚀现状图加以对比，结果显示：发生土壤侵蚀的地区一定是土壤侵蚀的敏感地区，但土壤侵蚀的敏感地区不一定发生土壤侵蚀：森林覆盖量、质量和人为活动是影响土壤侵蚀的主要原因。     

环境风险评价中若干问题探讨

社会经济的高速发展,也诱发了新的环境风险可能性的发生,特别是近年来的多种环境风险灾害事故的发生已引起了各国和国际组织的普遍关注。环境风险评价与环境风险管理已成为保护生态环境、维护公众健康的重要内容和制定决策的重要依据。文章结合目前环境风险评价的发展,探讨有关两大类环境风险评价(突发性与非突发性)以及环境风险评价与安全评价的区别,环境风险评价评估标准以及环境风险评价与城市环境管理的一些问题。     

中国产品生命周期影响评价方法研究

讨论了确定中国产品生命周期影响评价所需的标准化基准和权重的确定方法和程序，包括产品系统环境影响潜值计算，数据标准化，加权评估 以及计算环境影响负荷和资源耗竭系数4个步骤。标准化基准采用1990年中国人均环境影响总潜值来表达，而权重采用1990年的基准与2000年中国政府的削减目标所估算的基准之间的比值计算。     

水质动态评价的马尔柯夫方法

根据随机过程原理 ,构造了一个新的概率转移矩阵 ,并在此基础上引入进步度的概念 ,对河流水质综合质量变化情况进行动态评价。最后给出了实例分析     

Hybridization between wheat (Triticum aestivum) and the wild species Aegilops geniculata and A. biuncialis under experimental field conditions

Hybridization between Aegilops geniculata, A. biuncialis and bread wheat Triticum aestivum has been evaluated during two seasons under simulated field conditions to estimate the field hybridization rate under Central Spain conditions. The mean frequencies of hybridization between A. biuncialis and A. geniculata with wheat were 0.34% and 0.31%, respectively. Data from 10 hybrid plants for each combination showed that hybrids can be partially fertile by backcrossing with wheat parent, with percent averages of 3.17 grains/spikelets for A. biuncialis × wheat hybrids and 2.87 grains/spikelets for A. geniculata × wheat hybrids. Self-pollination, although at very low rates, was also possible in hybrids. The potential risks associated with natural hybridization in the context of transgenic wheat cultivation are discussed.