改性植被混凝土基材力学与植生试验研究

为探明羧甲基纤维素钠(CMC)与麦秸秆纤维对植被混凝土基材力学与植生性能的影响,通过直剪试验、植生试验研究了改性后植被混凝土基材(简称改性基材)的抗剪性能与黑麦草生长性能.结果 表明:①改性基材的剪切强度随CMC掺量的增加呈先增后减的变化趋势,0.5％CMC掺量时基材的剪切强度出现峰值,而随纤维掺量的增加改性基材剪切强...     

基于剪切梁理论的爆破扰动对巷道顶板稳定性影响研究

厚煤层沿底布置巷道顶板维护难度较大,从爆破扰动影响顶板稳定性的角度对此进行了研究.在分析爆破应力波远区破坏效应的基础上,建立了沿底布置巷道顶板的剪切梁模型,依此研究了顶板煤、岩体的水平位移及应力分布规律,最后以某矿地质条件为原型利用Flac3D数值软件进行了模拟研究.研究发现:基于爆破应力波的远区破坏效应,沿底布置巷道的顶板煤层与上覆岩层的相对错动可以用剪切梁理论加以分析.基于此得到了厚煤层巷道顶板中煤层与岩层单调加载过程及循环加载条件下的位移及应力分布,单次爆破对顶板的影响有限,多次扰动的累积效应会对其产生一定程度的损伤.模拟中,随着装药量的增加,沿底布置巷道顶板煤、岩体的水平位移随之增加,且煤体的位移量大于岩体;持续扰动条件下,煤、岩体的水平位移均出现了累加效应,且随着动力扰动作用次数的增加,煤、岩体的相对错动逐渐增大,容易产生顶板离层垮落等动力灾害.研究成果对加强扰动作用下顶板的支护管理具有一定的理论与指导意义.     

基于环剪试验的四方碑滑坡滑带土残余强度空间差异性和稳定性分析

水库滑坡因受库水位变化的影响,不同空间位置滑带土的含水率不同,滑带土残余强度也存在空间差异性,使用统一的滑带土残余强度难以准确计算滑坡的稳定性系数。以四方碑滑坡滑带土为研究对象,通过环剪试验分析了不同含水率和不同法向应力作用下滑带土的残余强度特性,结合滑坡渗流模拟结果对滑带土残余强度的空间差异性进行了分区,并计算了在175 m和145 m库水位条件下滑坡的稳定性。结果表明:不同含水率的滑带土试样,其残余强度与法向应力都呈现较好的线性关系,符合Mohr-Coulomb准则;随着滑带土含水率的增加,其残余黏聚力和残余内摩擦角都减小,且滑带土的残余内摩擦角与含水率之间呈现良好的负指数关系;基于滑带土分区的滑坡稳定性计算结果与通过野外调查得到的滑坡稳定性现状相符,说明本文方法具有可靠性。     

含裂隙岩石裂纹扩展与剪切特性的数值研究*

为研究直剪条件下含交叉裂隙岩石的裂纹扩展模式和剪切特性,基于PFC2D研究直剪条件下含裂隙岩石的裂纹扩展模式和剪切特性。研究结果表明:直剪过程可分4个阶段:Ⅰ初始平静阶段、Ⅱ裂纹单一扩展阶段、Ⅲ裂纹复杂扩展阶段、Ⅳ破坏阶段;法向应力越大,Ⅱ,Ⅲ阶段的裂纹扩展程度受到抑制;岩石中含单裂隙时,随裂隙角度α的增加,抗剪强度的变化趋势基本一致,遵循先降后增的规律;含交叉裂隙时,当主裂隙角度α=120°,150°时,抗剪强度随次裂隙角度β的增加呈先减小后增大的趋势,抗剪强度最小值均出现在β=30°;加固含裂隙岩体时,预防裂隙或者潜在破坏面两侧的岩体产生位移差,使其加固后成为1个稳固整体,是避免岩体产生裂纹导致破坏的重要手段。     

A Literature Review of Poly(Lactic Acid)

A literature review is presented regarding the synthesis, and physicochemical, chemical, and mechanical properties of poly(lactic acid)(PLA). Poly(lactic acid) exists as a polymeric helix, with an orthorhombic unit cell. The tensile properties of PLA can vary widely, depending on whether or not it is annealed or oriented or what its degree of crystallinity is. Also discussed are the effects of processing on PLA. Crystallization and crystallization kinetics of PLA are also investigated. Solution and melt rheology of PLA is also discussed. Four different power-law equations and 14 different Mark–Houwink equations are presented for PLA. Nuclear magnetic resonance, UV–VIS, and FTIR spectroscopy of PLA are briefly discussed. Finally, research conducted on starch–PLA composites is introduced.     

Experimental study of recirculating flows generated by lateral shock waves in very large channels

Due to the lack of data on hydraulic-jump dynamics in very large channels, the present paper describes the main characteristics of the velocity field and turbulence in a large rectangular channel with a width of 4 m. Although a hydraulic jump is always treated as a wave that is transversal to the channel wall, in the case of this study it has a trapezoidal front shape, first starting from a point at the sidewalls and then developing downstream in an oblique manner, finally giving rise to a trapezoidal shape. The oblique wave front may be regarded as a lateral shockwave that arises from a perturbation at a certain point of the lateral wall and travels obliquely toward the centreline of the channel. The experimental work was carried out at the Coastal Engineering Laboratory of the Water Engineering and Chemistry Department of the Technical University of Bari (Italy). In addition to the hydraulic jump formation, a large recirculating flow zone starts to develop from the separating point of the lateral shock wave and a separate boundary layer occurs. Intensive measurements of the streamwise and spanwise flow velocity components along one-half width of the channel were taken using a bidimensional Acoustic Doppler Velocimeter (ADV). The water surface elevation was obtained by means of an ultrasonic profiler. Velocity vectors, transversal velocity profiles, turbulence intensities and Reynolds shear stresses were all investigated. The experimental results of the separated boundary layer were compared with numerical predictions and related work presented in literature and showed good agreement. The transversal velocity profiles indicated the presence of adverse pressure gradient zones and the law of the wall appears to govern the region around the separated boundary layer.     

城市生活垃圾填埋场渗滤液粘度研究

采用旋转粘度计测试了CODCr浓度为 10 0 0～ 75 0 0 0mg L、温度在 5～ 70℃范围内的渗滤液粘度。实验结果表明 ,相同温度下渗滤液的粘度值与CODCr浓度呈线性关系 ;不同浓度渗滤液中溶质性质的差异是造成渗滤液比浓粘度差异的原因 ;研究填埋场水分运移时 ,可以不考虑粘度对渗滤液流动的影响。     

新型絮凝剂聚环氧氯丙烷胺的合成研究

以环氧氯丙烷和二甲胺为原料,乙二胺为交联剂,制备有机阳离子聚合物,研究乙二胺加入量、反应温度、环氧氯丙烷和二甲胺的摩尔比、聚合时间等对聚合物粘度和阳离子度的影响,利用电子透射电镜(TEM)和电子扫描电镜(SEM)对聚合物的结构形貌进行了表征,结果表明,环氧氯丙烷和二甲胺的摩尔比为1．5：1,乙二胺加入量为3％时,聚合物的粘度和阳离子度最大,具有较强的吸附架桥和电中和作用,对染料废水有较好的脱色效果。     

粉煤灰最大往返剪切作用面上应变破坏标准的应力条件

基于文献[1]提出的最大往返剪切作用面上的液化应力条件和粉煤灰的动三轴试验数据,运用回归分析方法拟合曲线及相关参数建立了粉煤灰的破坏应力条件,并应用F检验法对参数的回归效果进行了检验,检验结果表明参数的回归效果高度显著。得出的破坏应力条件表明初始剪应力与动剪应力的倒数间并不呈线性关系,而是二次多项式关系,这与张克绪所提出的应力条件存在着差异。因此,可初步认为张克绪的液化应力条件不能直接运用于粉煤灰。     

用二阶闭合理论确定的大气扩散系数的分析

本文分析了作者以前得到的一种扩散系数的某些结果,认为这种扩散系数解释了垂直湍流和风切变的联合作用使水平扩散增大的实验观测结果;建立了与雷诺应力间的函数关系,在简化情况下,与泰勒理论得到的结论类似。在边界层低层,湍流扩散系数与粘性系数是不相等的,有时会有较大差别。