拼焊板材冲压成形技术(工)

详细介绍和总结了拼焊板的研究现状,讨论了拼焊板的材料和焊接技术的研究成果及其相关技术问题.     

Appljcation of the thermal lens effectfor determination of iodide

ＡｐｐｌｊｃａｔｉｏｎｏｆｔｈｅｔｈｅｒｍａｌｌｅｎｓｅｆｆｅｃｔｆｏｒｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｉｏｄｉｄｅＧｕＸｉａｏｍｅｉ：ＷａｎｇＳｈｕｎｒｏｎｇ；ＱｉｎＫｅｘｕａｎ；Ｌｉｊｉｅｃｈｕｎ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－Ｅｎｖｉ...     

液体旋流分离器内部流场分布的测试与研究

改变传统的利用皮托管插入法对流场分布的测试方法 ,利用激光流速计分别对两种具有代表性的液体旋流分离器的切线方向和轴线方向的流场分布进行了测试 ,得到了精确的结果。为分析、研究和提高旋流分离器的性能 ,提供了最基本的和最有效的数据     

激光光散射技术用于Fenton反应中Fe(Ⅲ)水解过程的研究

利用激光光散射技术，研究了不同条件下Ferton反应中Fe(Ⅲ)水解过程的粒径变化，并和一般铁盐体系中Fe(Ⅲ)水解过程进行了比较，结果表明，Fe(Ⅲ)的水解过程中，粒径变化受水解度B^*和铁盐浓度的影响，即B^*值愈大，浓度愈高，体系粒径愈大．并且在相同浓度和水解度B^*的条件下，Fenton反应生成的Fe(Ⅲ)比一般铁盐的水解聚合迅速，形成的粒径大，对采油废水进行处理的实验结果表明，Fenton体系对有机物的吸附去除效果明显优于常规铁盐体系，这可能与Fenton体系的高水解速率有关。     

Adoption and economic impacts of laser land leveling in the irrigated rice-wheat system in Haryana,India using endogenous switching regression

This study assesses the factors affecting the adoption of laser land leveling (LLL) and its impact on crop yields and net returns. It uses household survey data collected from 621 randomly selected farmers in Karnal District of Haryana, India, and applies endogenous switching regression models. Unbiased model results show that the adoption of LLL has significant positive impacts on yields (rice +549 kg ha⁻¹; wheat +471 kg ha⁻¹) and net returns (an aggregate increase of US$230/ha) in the rice-wheat production system, thereby raising farmers' income substantially. Our results show that LLL adoption at the farm level is influenced by land size and quality, tenure system, availability of farm machinery (tractor), access to finance and farm cooperatives, gender of household head, level of education and training and access to extension services. Therefore, LLL scaling strategies need to consider these bio-physical and socio-economic parameters to reach adoption at scale and generate large social, economic, and environmental benefits.     

Methane emissions from a dairy feedlot during the fall and winter seasons in Northern China

Accurately determining methane emission factors of dairy herd in China is imperative because of China’s large population of dairy cattle. An inverse dispersion technique in conjunction with open-path lasers was used to quantify methane emissions from a dairy feedlot during the fall and winter seasons in 2009-2010. The methane emissions had a significant diurnal pattern during both periods with three emission peaks corresponding to the feeding schedule. A 10% greater emission rate in the fall season was obtained most likely by the higher methane emission from manure during that period. An annual methane emission rate of 109 ± 6.7 kg CH₄ yr⁻¹ characterized with a methane emission intensity of 32.3 ± 1.59 L CH₄ L⁻¹ of milk and a methane conversion factor (Y_m) of 7.3 ± 0.38% for mature cattle was obtained, indicating the high methane emission intensity and low milk productivity in Northern China.     

磷钨酸光催化六氟苯脱氟的研究

选择六氟苯作为目标化合物,利用266 nm脉冲激光照射磷钨酸与六氟苯的混合溶液证实了光催化转化六氟苯的可行性.结果表明,氟离子生成率与光照时间、pH值、磷钨酸初始投加量和添加物的量有关.氟离子生成率随激光脉冲次数的增加而升高.在溶液pH=1.0的条件下,氟离子生成率最高.2.0×10^-4mol/L的六氟苯与5.0×10^-6mol/L的磷钨酸的混合溶液在接受脉冲激光后,氟离子生成率可达208.1%.外加的氧化剂O₂、KMnO₄、K₂S₂O₈可以有效氧化还原态的磷钨酸,实现整个光催化循环.溶液中存在的醇类及芳香族有机化合物不利于磷钨酸光催化转化六氟苯.     

悬浮载体生物膜内硝化菌群空间分布规律

利用16S rRNA寡核苷酸探针荧光原位杂交和共聚焦激光扫描显微镜联用技术,对悬浮载体生物膜内硝化菌群的空间分布规律进行了分析.试验采用3组结构完全相同的悬浮载体生物膜反应器,每个反应器的曝气区为6L,沉淀区为2L,水力停留时间为1.0h,3个反应器的进水COD/NH₄⁺-N分别为15、10和5,从反应器中取出载体颗粒表面的生物膜进行分析,研究各反应器中生物膜的微生物群落结构的变化规律.结果表明,SCBR内载体表面生物膜的总体厚度在80～120μm左右,氨氧化菌和亚硝酸盐氧化菌主要分布在生物膜表面的20～30μm左右范围内.随着进水中COD/NH₄⁺-N的增加,氨氧化菌和亚硝酸盐氧化菌在整个生物膜中所占的比例逐步下降.     

Aspects of biopsy procedures prior to preimplantation genetic diagnosis

Today, preimplantation genetic diagnosis (PGD) is offered in over 40 centres worldwide for an expanded range of genetic defects causing disease. This very early form of prenatal diagnosis involves the detection of affected embryos by fluorescent in situ hybridization (FISH) (sex determination or chromosomal defects) or by polymerase chain reaction (PCR) (monogenic diseases) prior to implantation. Genetic analysis of the embryos involves the removal of some cellular mass from the embryos (one or two blastomeres at cleavage-stage or some extra-embryonic trophectoderm cells at the blastocyst stage) by means of an embryo biopsy procedure. Genetic analysis can also be performed preconceptionally by removal of the first polar body. However, additional information is then often gained by removal of the second polar body and/or a blastomere from the embryo. Removal of polar bodies or cellular material from embryos requires an opening in the zona pellucida, which can be created in a mechanical way (partial zona dissection) or chemical way (acidic Tyrode's solution). However, the more recent introduction of laser technology has facilitated this step enormously. Different biopsy procedures at different preimplantation stages are reviewed here, including their pros and cons and their clinical applications. The following aspects will also be discussed: safety of zona drilling by laser, use of Ca²⁺/Mg²⁺-free medium for decompaction, and removal of one or two cells from cleavage-stage embryos. Copyright © 2001 John Wiley & Sons, Ltd.