改性纳米零价铁的制备及其去除水中的四环素

对聚乙烯吡咯烷酮(PVP-K30)改性纳米零价铁(NZVT)用于水中四环素(TC)的去除进行研究.通过XRD,TEM和BET对改性后的纳米铁性能进行表征.探讨不同反应条件对PVP-NZVI去除四环素的影响.实验结果表明,在制备过程中添加PVP-K30改性剂可以明显减小纳米铁颗粒粒径,增大比表面积,提高TC的去除率.当初...     

用Fe3+掺杂锐钛矿型TiO2光催化剂降解孔雀石绿

以硫酸钛为原料,用水热法制备了Fe3+掺杂锐钛矿型TiO2(Fe3+ - TiO2)粉末,用扫描电子显微镜测定了试样的形貌.研究了自制的Fe3+ - TiO,光催化剂对孔雀石绿的光催化降解作用.实验结果表明,在孔雀石绿溶液质量浓度为2 mg/L、Fe3+ - TiO2加入量为1.616 g/L、Fe3+-TiO2中Fe...     

Influences of redox transformation, metal complexation and aggregation of fulvic acid and humic acid on Cr(VI) and As(V) removal by zero-valent iron

This study investigated the removal kinetics and mechanisms of Cr(VI) and As(V) by Fe(0) in the presence of fulvic acid (FA) and humic acid (HA) by means of batch experiments. The focus was on the involvements of FA and HA in redox reactions, metal complexation, and iron corrosion product aggregation in the removal of Cr(VI) and As(V) removal by Fe(0). Synthetic groundwater was used as the background electrolyte to simulate typical groundwater. The results showed faster Cr(VI) removal in the presence of HA compared to FA. Fluorescence spectroscopy revealed that no redox reaction occurred in the FA and HA. The results of the speciation modeling indicate that the free Fe(II) concentration was higher in the presence of HA, resulting in a higher removal rate of Cr(VI). However, the removal of As(V) was inhibited in the HA solution. Speciation modeling showed that the concentration of dissolved metal-natural organic matter (metal-NOM) complexes significantly affected the aggregation of the iron corrosion products which in turn affected the removal of As(V). The aggregation was found to be induced by gel-bridging of metal-NOM with the iron corrosion products. The effects of metal-NOM on the aggregation of the iron corrosion products were further confirmed by TEM studies. Larger sizes of iron corrosion products were formed in the FA solution compared to HA solution. This study can shed light on understanding the relationships between the properties of NOM (especially the content of metal-binding sites) and the removal of Cr(VI) and As(V) by Fe(0).     

MAP法处理高浓度氨氮废水技术研究进展

MAP法(磷酸铵镁沉淀法)是去除废水中高浓度氨氮的一种有效技术。本文叙述了MAP法去除废水中氨氮的反应机理,分析pH值、物质摩尔比,反应时间等影响因素。该方法具有去除率高、反应速度快、受外界环境影响小等特点,同时还实现了对氮的有效回收,具有较好的应用前景。     

Variability of sediment-contact tests in freshwater sediments with low-level anthropogenic contamination - Determination of toxicity thresholds

Freshwater sediments with low levels of anthropogenic contamination and a broad range of geochemical properties were investigated using various sediment-contact tests in order to study the natural variability and to define toxicity thresholds for the various toxicity endpoints. Tests were performed with bacteria (Arthrobacter globiformis), yeast (Saccharomyces cerevisiae), nematodes (Caenorhabditis elegans), oligochaetes (Lumbriculus variegatus), higher plants (Myriophyllum aquaticum), and the eggs of zebrafish (Danio rerio). The variability in the response of some of the contact tests could be explained by particle size distribution and organic content. Only for two native sediments could a pollution effect not be excluded. Based on the minimal detectable difference (MDD) and the maximal tolerable inhibition (MTI), toxicity thresholds (% inhibition compared to the control) were derived for each toxicity parameter: >20% for plant growth and fish-egg survival, >25% for nematode growth and oligochaete reproduction, >50% for nematode reproduction and >60% for bacterial enzyme activity.     

超声强化Fe0去除阳离子红GTL的研究

采用US/Fe⁰系统去除阳离子红GTL,考察了pH值、Fe⁰用量、超声功率及活性炭、H₂O₂、盐分添加对阳离子红GTL去除率的影响,利用紫外-可见吸收光谱变化查明阳离子红GTL在不同条件下的去除差异性,利用SEM解析铁的形态与染料去除的相关性。结果表明： pH≥5.0时超声和Fe⁰具有协同效应,Fe⁰用量2 g/L,pH=7.0,超声功率135 W,阳离子红GTL去除率达到96.07%;一定量的活性炭、H₂O₂、盐分添加会加速染料去除,US加速Fe⁰反应速度,但不改变染料降解机理,添加活性炭能够彻底降解阳离子红GTL,添加H₂O₂提供的氧化环境抑制苯胺类化合物生成;铁的形态及与染料的接触是影响染料去除效果的重要原因。     

铁床+立式氧化槽治理农药废水

介绍了某农药生产企业采用铁床＋立式氧化槽工艺处理农药废水,给出了工艺流程、工艺参数和处理效果。废水处理运行结果：CODcr、色度、SS平均去除率分别大于95％、90％、97％。     

Suwannee河黄腐酸光化学生成溶解无机碳的研究

用模拟太阳光照射Suwannee河黄腐酸以模拟光氧化过程,研究了溶解氧浓度、模拟太阳光波长范围和铁浓度对溶解无机碳产量的影响.结果表明,氧气饱和样品的溶解无机碳生成速率比空气饱和条件下(3.32 μmol/(L·h))增加了40.1%(以照射过程中线性回归的生成速率计算); 实验以Mylar-D、有机玻璃UF-3和有机玻璃UF-4为滤光片研究了波长范围对溶解无机碳产量的影响,近似计算的结果表明UV-B、UV-A 和可见光部分分别占全波段模拟太阳光光化学生成无机碳产量的43%、42% 和 15%; 当样品铁浓度达到10 μmol/L时,其溶解无机碳的生成速率约为初始样品(Suwannee河黄腐酸铁浓度为1.90 μmol/L)的2.8倍,证实了铁在光化学氧化过程中的催化作用.     

Channel flow and trichloroethylene treatment in a partly iron-filled fracture: experimental and model results

Technical developments have now made it possible to emplace granular zero-valent iron (Fe(0)) in fractured media to create a Fe(0) fracture reactive barrier (Fe(0) FRB) for the treatment of contaminated groundwater. To evaluate this concept, we conducted a laboratory experiment in which trichloroethylene (TCE) contaminated water was flushed through a single uniform fracture created between two sandstone blocks. This fracture was partly filled with what was intended to be a uniform thickness of iron. Partial treatment of TCE by iron demonstrated that the concept of a Fe(0) FRB is practical, but was less than anticipated for an iron layer of uniform thickness. When the experiment was disassembled, evidence of discrete channelised flow was noted and attributed to imperfect placement of the iron. To evaluate the effect of the channel flow, an explicit Channel Model was developed that simplifies this complex flow regime into a conceptualised set of uniform and parallel channels. The mathematical representation of this conceptualisation directly accounts for (i) flow channels and immobile fluid arising from the non-uniform iron placement, (ii) mass transfer from the open fracture to iron and immobile fluid regions, and (iii) degradation in the iron regions. A favourable comparison between laboratory data and the results from the developed mathematical model suggests that the model is capable of representing TCE degradation in fractures with non-uniform iron placement. In order to apply this Channel Model concept to a Fe(0) FRB system, a simplified, or implicit, Lumped Channel Model was developed where the physical and chemical processes in the iron layer and immobile fluid regions are captured by a first-order lumped rate parameter. The performance of this Lumped Channel Model was compared to laboratory data, and benchmarked against the Channel Model. The advantages of the Lumped Channel Model are that the degradation of TCE in the system is represented by a first-order parameter that can be used directly in readily available numerical simulators.