汕头港水域温排水热扩散的三维数值模拟

本文建立了汕头港水域温排水扩散的三维数学模型，并采用特征差分方法求其解，对该法在三维情况下的稳定作了推导，给出了判断公式，上述模型被应用于汕头热电厂废热水排放的环境影响评价中，实例计算表明，该模型算法程序简单，计算结果合理。     

NH3-N在大连湾的水环境行为模拟研究

应用三维水质模型对大连湾中的主要污染物NH3-N的行为进行了模拟,对NH3-N浓度的时空变化规律以及其影响因素进行了研究,选择主要的模型参数进行了灵敏度分析。由空间分布的模拟结果可知,在大连湾,NH3-N浓度主要集中在排污口附近区域,灵敏度分析显示,在排污口区水体的扩散能力对NH3-N浓度的影响较大。由季节变化模拟结果可知,在湾顶部的排污口区NH3-N浓度显示明显的季节变化趋势。在湾中部和朝海边界的湾口区NH3-N浓度较低,变化平缓。模拟结果可以为大连湾的污染控制、水质规划和管理提供科学依据。     

圆杯—多边形杆复合挤压的上限研究

此文采用三次多项式表示的流线速度场和基元圆环技术相结合的混合流动模型对国杯—多边形截面杆型复合挤压进行了上限分析,得到挤压力的上限解,分析了杆部截面形状对复合挤压分流点位置及变形力的影响规律并对理论计算进行了实验验证.     

Using chemical process simulation to design industrial ecosystems

Chemical process simulation (CPS) software has been widely used by chemical (process) engineers to design, test, optimise, and integrate process plants. It is expected that industrial ecologists to bring these same problem-solving benefits to the design and operation of industrial ecosystems can use CPS. This paper provides industrial ecology researchers and practitioners with an introduction to CPS and an overview of chemical engineering design principles. The paper highlights recent research showing that CPS can be used to model industrial ecosystems, and discusses the benefits of using CPS to address some of the technical challenges facing companies participating in an industrial ecosystem. CPS can be used to (i) quantitatively evaluate and compare the potential environmental and financial benefits of material and energy linkages; (ii) solve general design, retrofit, or operational problems; (iii) help to identify complex and often counter-intuitive solutions; and (iv) evaluate what-if scenarios. CPS should be a useful addition to the industrial ecology toolbox.     

新疆D矿田金矿资源定量评价

本文在建立D矿田找矿信息层次模型基础上,确定矿田统计单元划分和地质变量提取的赋值原则,将该矿田划分出466个统计单元,提取25个地质变量并进行二态赋值,而后应用数量化理论Ⅲ。特征分析法及勃尔法等方法,建立了矿田金矿资源定量评价模型,定位预测了45个勘探靶区。     

河流枯水流量特征研究

本文以泾、洛、渭三河流干流在陕西境内的主要控制断面为例,分析了１４个时段枯水流量的概率分布特征,选定了理论分布线型,揭示了各枯水序列的时段平均流量均值、变差系数和偏态系数的变化规律,建立了推求不同频率不同时段的枯水流量的经验公式。绘制了相应的关系曲线,应用十分方便。     

全封闭垃圾焚烧空气污染影响与控制措施

以大坦沙资源电厂为研究对象 ,通过对全封闭垃圾燃烧、污染物去除、废气高空排放工艺流程分析以及运用列举法和大气扩散数学模式对全封闭垃圾焚烧厂的污染影响与控制进行了探究 ,提出了有关垃圾焚烧空气污染防治对策和建议 ,为垃圾焚烧处理提供参考     

GJB 150A淋雨试验强化试验程序数值模拟和试验装置设计研究

目的 研究GJB 150.8A—2009《军用装备实验室环境试验方法第8部分:淋雨试验》中强化试验程序的工程实现方法.方法 在标准解读的基础上,以强化试验程序用喷嘴为对象,建立数值模型,分析喷嘴在强化试验程序过程中的流场分布,并基于分析结果给出强化试验程序试验装置设计的思路和方法.结果 在喷嘴内,压力变化剧烈,极短距离内由276 kPa迅速降至101 kPa.水流经过喷嘴经历了激烈的加速过程,从距离喷嘴出口0.01～0.4 m,水流速度从251 m/s迅速降至17.8 m/s,到远场趋于稳定.结论 分析结果对指导强化试验程序的试验装置的设计和试验实施具有重要参考意义.     

A Simulation of Temporal and Spatial Variations in Carbon at Landscape Level: A Case Study for Lake Abitibi Model Forest in Ontario,Canada

Using a case study of the Lake Abitibi Model Forest (LAMF), this study aims to assess the temporal and spatial variability in carbon storage during 1990–2000, and to present a comprehensive estimation of the carbon budget for LAMF's ecosystems. As well, it provided the information needed by local forest managers to develop ecological and carbon-based indicators and monitor the sustainability of forest ecosystems. Temporal and spatial carbon dynamics were simulated at the landscape level using ecosystem model TRIPLEX1.0 and Geographical Information System (GIS). The simulated net primary productivity (NPP) and carbon storage in forest biomass and soil were compared with field data and results from other studies for Canada's boreal forests. The results show that simulated NPP ranged from 3.26 to 3.34 tC ha⁻¹ yr⁻¹ in the 1990s and was consistent with the range measured during the Boreal Ecosystem-Atmosphere Studies (BOREAS) in central Canada. Modeled NPP was also compared with the estimation from remote sensing data. The density of total above-and belowground biomass was 125.3, 111.8, and 106.5 tC ha⁻¹ for black spruce, trembling aspen, and jack pine in the LAMF ecosystem, respectively. The total carbon density of forested land was estimated at 154.4 tC ha⁻¹ with the proportion of 4:6 for total biomass and soil. The analysis of net carbon balance of ecosystem suggested that the LAMF forest ecosystem was acting as a carbon sink with an allowable harvest in the 1990s.     

利用神经网络及数值模拟获取变压边力控制曲线

在应用Dynaform、Autoform等板料数值模拟软件的过程中 ,通常需要对压边力施力曲线进行各种预先的设定 ,但如何选定施力模式一直是一个比较棘手的问题 ,在文中利用数值模拟及MATLAB中的神经网络工具箱得出了压边力的最优控制曲线