新型真空膜渗透结晶工艺初探

真空膜渗透结晶工艺(vacuum membrane percrystallization, VMPC)是一种新型膜结晶工艺,可同步实现溶质的结晶及其与溶剂的分离回收。以NaCl溶液为目标物系,对VMPC过程的原理进行了分析,初步考察了进料液温度、浓度和操作压力对该工艺产能的影响。结果表明：VMPC过程是膜渗透和真空压差闪蒸结晶的协同作用的过程,随进料液温度的升高,结晶盐通量和水通量均增大;随进料液浓度的升高,结晶盐通量增大,水通量降低;而操作压力对工艺产能影响较小,但对生成晶体的形貌影响显著;当进料液温度为34 ℃,进料质量分数为25%,操作压力为0.5 kPa时,可获得高达8.04 kg·(m²·h)⁻¹的盐通量和30 L·(m²·h)⁻¹的水通量,远高于现有太阳能驱动膜结晶技术的产能。针对现有膜滤浓缩液类高浓盐水结晶工艺流程复杂、能耗高、效率和产能低的问题,VMPC工艺为新型高效处置技术的开发及应用提供了可行的解决方案。     

恐惧诉求对职业驾驶员安全驾驶态度和行为意向的影响

研究以EPPM模型作为理论框架,探讨恐惧诉求对危险驾驶行为(超速和不系安全带)态度和行为意向的作用。54名职业驾驶员在观看交通安全恐惧诉求录像后,完成安全驾驶行为问卷。回归分析表明恐惧诉求的交通事故录像能够改变驾驶员对超速及不系安全带驾驶的态度和行为意向,但作用不完全一致。恐惧情绪唤起通过恐惧情感所引发的威胁评估过程中介对不超速行为意向的影响。最后,对研究的局限和未来的研究进行讨论。     

Dynamic risk assessment for underground gas storage facilities based on Bayesian network

Loss of the underground gas storage process can have significant effects, and risk analysis is critical for maintaining the integrity of the underground gas storage process and reducing potential accidents. This paper focuses on the dynamic risk assessment method for the underground gas storage process. First, the underground gas storage process data is combined to create a database, and the fault tree of the underground gas storage facility is built by identifying the risk factors of the underground gas storage facility and mapping them into a Bayesian network. To eliminate the subjectivity in the process of determining the failure probability level of basic events, fuzzy numbers are introduced to determine the prior probability of the Bayesian network. Then, causal and diagnostic reasoning is performed on the Bayesian network to determine the failure level of the underground gas storage facilities. Based on the rate of change of prior and posterior probabilities, sensitivity and impact analysis are combined to determine the significant risk factors and possible failure paths. In addition, the time factor is introduced to build a dynamic Bayesian network to perform dynamic assessment and analysis of underground gas storage facilities. Finally, the dynamic risk assessment method is applied to underground gas storage facilities in depleted oil and gas reservoirs. A dynamic risk evaluation model for underground gas storage facilities is built to simulate and validate the dynamic risk evaluation method based on the Bayesian network. The results show that the proposed method has practical value for improving underground gas storage process safety.     

Effects of typical additives on the thermal stability of ammonium peroxydisulfate

Ammonium peroxydisulfate (APS), one of the most widely used inorganic peroxides in the process industries, is a thermally unstable peroxide and potent oxidizer due to the presence of peroxy bond in the molecule and is incompatible with most substances. To investigate the effect of typical additives on the thermal decomposition of APS, in this paper, diamine phosphate (DAP), monoamine phosphate (MAP), and aluminum hydroxide (AH) were selected as additives; pure APS and samples with 10 wt% and 20 wt% of additives were first tested by differential scanning calorimetry (DSC). The experiments and analysis showed that the samples with 10 wt% of additive had better thermal stability than those with 20 wt% of additive. After screening, the three groups of 10 wt% AH, 10 wt% MAP, and 20 wt% MAP additive conditions could be considered to have a better thermal stability effect on the thermal decomposition of APS. Four groups of samples were, in turn, tested by Phi-Tec II. The adiabatic results showed two discontinuous exothermic processes; 10 wt% AH promoted the weak exothermic effect in the first stage. In contrast, the three groups of additives in the main exothermic stage showed different degrees of inhibition, and the inhibiting effect was ranked as 10 wt% AH, 10 wt% MAP, and 20 wt% MAP in order. Finally, the self-accelerated decomposition temperature (SADT) was calculated under the 25 kg standard package. The adiabatic results, including SADT, were combined to render feasible recommendations for the use of additives, which provides references for the packaging and transportation of additives and their applications.     

A thermal hazard risk evaluation of emulsion polymerisation and vinyl acetate monomers in the latex manufacturing process

Latex is extensively used in industrial products. However, completing some processes at scale leads to unacceptable levels of risk that need to be quantified and mitigated. Systemic risks must be eliminated wherever possible, and safety takes priority over efficiency and quality. To assess the process risks accurately, four raw materials were examined in this study: polyvinyl acetate (PVA), latex process-initiator-ammonium persulfate (APS) and hydrogen peroxide (H₂O₂), and vinyl acetate monomer (VAM). The physicochemical composition of the PVA latex process was determined via calorimeters, including differential scanning calorimetry (DSC) and vent sizing package 2 (VSP2). The calorimetry results showed that the protective colloid was a critical component in the polymerisation reaction. In addition, when adding initiators to the system, it is vital to observe the normal ratio of materials and keep the stirring system operating. The scenario system also simulated the effects of shutting down various inhibitory programs, including the build-up of free radicals that could result in a runaway reaction when the initiator was added in excess. On the other hand, the result of the risk matrix displayed as a medium level, indicating that although the probability of an accident is low, the resulting severity is at disaster level. As a result, this study provides process safety engineers with a reliable frame of reference for assessing the potential dangers in the PVA latex manufacturing process.     

A bayesian network-based safety assessment method for solid propellant granule-casting molding process

The safety of the solid propellant molding process is vital for the stable production of high-quality propellants. Failure events caused by abnormal parameters in the molding process may have catastrophic consequences. In this paper, a Bayesian network (BN) model is proposed to assess the safety of the solid propellant granule-casting molding process. Fault tree analysis (FTA) is developed to construct a causal link between process variables and process failures. Subsequently, expert experience and fuzzy set theory (FST) are used to obtain failure probabilities of the basic events (BEs). Based on the mapping rules, FTA provides BN with reliable prior knowledge and a network structure with interpretability. Finally, when new evidence is obtained, the probability is updated with the diagnostic reasoning capability of BN. The results of the sensitivity analysis and diagnostic inference were combined to identify key parameters in the granule-casting molding process, including curing temperature, vacuum degree, extrusion, calendering roll distance, length setting value, holding time, and polish time. The results of this paper can provide effective supporting information for managers to conduct process safety analysis.     

Effect of particle size on CO adsorption and thermodynamic analysis

The liquid nitrogen adsorption method was used to characterize the pore structure of non-cohesive coal in the 061,404 working face of the Lingxin coal mine. The amount of specific surface area of micropores in the sample continuously rose as particle sizes reduced. The volumetric method was used to measure the CO isothermal adsorption curves of three samples (sample I, 0.425–0.25 mm, sample II, 0.18–0.25 mm, and sample III, 0.15–0.18 mm). The experimental results were fitted by the Langmuir model. According to the experimental results, it was conducive to CO adsorption with the conditions of high pressure and low-temperature. The decrease in grain diameter increased the number and volume of micropores in the sample, which improved the adsorption capacity of the sample. In addition, according to the adsorption data, the CO adsorption thermodynamics of three samples were analyzed, including surface potential (Ω), Gibbs free energy change (ΔG) and entropy change (ΔS). The results demonstrated that CO adsorption by coal was a spontaneous process. Sample III has the most substantial adsorption capacity, whereas the sample I has the weakest adsorption capacity.     

O3-BAC深度处理工艺中细菌群落时空分布及动态变化规律

为弄清饮用水O₃-BAC深度处理工艺过程中细菌群落的时空分布和动态变化规律,本研究以我国南方某O₃-BAC深度处理工艺水厂为研究对象,采用NovaSeq6000高通量测序技术对夏季和冬季各工艺单元出水及滤砂和活性炭生物膜等细菌群落进行解析.结果表明,出厂水pH、浊度、COD_Mn、菌落总数等指标均满足《生活饮用水卫生标准》(GB5749-2006)的要求.夏季细菌群落多样性明显高于冬季,活性炭生物膜的细菌群落多样性高于滤砂生物膜;混凝沉淀、臭氧化和消毒是影响细菌群落多样性的主要工艺单元.水样和生物膜样品绝对优势菌门均为变形菌门(Proteobacteria),且主要菌门组成大体相同,但细菌群落门水平相对丰度存在一定的时空差异,属水平上差异则更为明显.此外,检测到的条件致病菌属主要包括芽孢杆菌属(Bacillus)、不动杆菌属(Acinetobacter)、假单胞菌属(Pseudomonas)和分支杆菌属(Mycobacterium),且其所占核心微生物OTUs数目不受季节性影响.水温和生物可降解溶解性有机碳(BDOC)是显...     

盐雾试验方墨探讨

分析了不同盐雾试验方法标准对盐溶液配制、试样的处理和检测、试验参数、试验过程控制等方面的不同要求,探讨了盐雾试验的操作技术,提出了必须严格控制盐雾试验过程的建议和不能用不同标准进行的盐雾试验结果进行比较的观点.     

AAO工艺低氧条件下的运行及其模拟

利用厌氧-缺氧-好氧(AAO)工艺探讨了在好氧池低溶解氧(DO)浓度条件下的水质指标变化情况.结果表明,当好氧池DO浓度从2.00 mg·L~(-1)降低到1.00 mg·L~(-1)和0.50 mg·L~(-1)时,系统仍然具有良好的除磷脱氮效果,出水水质指标均满足我国《城镇污水处理厂污染物排放标准》(GB 18918-2002)中的一级A标准.在此基础上,基于Bio Win 4.1软件建立了AAO工艺的活性污泥模型,对模型参数进行了灵敏度分析,并利用动态模拟对模型参数中的聚磷菌吸收乙酸或丙酸的聚羟基烷酸(PHA)产率系数(YP/PHA,seq)、聚磷菌好氧氧化PHA的储磷率(YP/PHA,aerobic)、氨氧化菌的最大单位生长速率(μmax,A)和亚硝酸盐氧化菌的最大单位生长速率(μmax,N)进行了校验.此外,对系统的曝气能耗进行了模拟评估,结果表明,与好氧池DO浓度为2.00 mg·L~(-1)时相比,好氧池DO浓度为1.00 mg·L~(-1)和0.50 mg·L~(-1)时的空气流量可分别节省23.8%和38.1%,氧转移效率可分别提高7.2%和11.7%.