1，4-二氯苯降解菌的分离及其降解特性研究

从某污水处理曝气池的活性污泥中分离出一株能够以1,4-二氯苯为唯一碳源和能源生长的菌株DEB-1,通过形态特征和生理生化试验初步鉴定为黄杆菌属（Flavobacterium sp.）。实验结果表明,该菌株最适降解温度为32℃、最适降解pH为7.8,24 h对100 mg/L的1,4-二氯苯的降解率达94.5%。菌株DEB-1的降解谱较广,对5种氯苯类物质具有较高的降解率。并进一步研究了DEB-1的1,4-二氯苯降解酶粗酶液的性质,其最适反应温度和pH分别为30℃和8.5。对处理含氯代芳香化合物的有机废水具有一定的意义。     

碱熔融法合成NaA和NaX型粉煤灰沸石的品质表征

以粉煤灰为原料采用碱熔融法合成了2种单一沸石矿物种的NaA和NaX型沸石,并对产物的结构、性能和应用指标进行了详细表征.经x射线衍射和IR光谱分析,表明合成产物是无杂晶生成的NaA和NaX型沸石相;在扫描电镜观察下,产物分别具有NaA和NaX型沸石的立方体和八面体晶体骨架结构.DTA分析表明了合成产物中沸石水的存在,且产物热稳定性较好.通过对比,粉煤灰合成的NaA和NaX型沸石的比表面积达到了相应商品沸石的66.9%和83.6%;孔容为41.1%和70.2%;阳离子交换容量(CEC,cation exchange capacity)为82.93%和84.31%.通过比较化学组成表明,大规模应用合成产物不会对环境造成危害.     

杀虫单降解菌的筛选分离与降解特性研究

从农药厂废水排放沟污泥中分离到一株对杀虫单有较强降解能力的菌株LY－4,经鉴定为巨大芽孢杆菌（Bacillus megaterium)。其生长的最适pH为7,最适温度为30℃。该菌对杀虫单有很强的耐受性,在杀虫单浓度ρ＝5000mg/L时,仍能较好地生长并发挥降解作用。当杀虫单初始浓度高于一定值时,一定量的菌剂对杀虫单的降解率随底物浓度的提高而降低,而绝对去除量则随底物浓度的提高而提高。与不加菌的对照相比,加入LY－4后,可使杀虫单浓度在很短的时间内降到很低的水平。图5表1参6     

水样发光细菌急性毒性测试的方式与表征

选取不同类型的环境和污染源水样开展了发光细菌毒性测试,针对不同环境管理目标,探讨了急性毒性定量表征方式。发光细菌急性毒性测试在环境应急监测、水源早期生物预警中,采用绘制毒性预警基线图的方式比较可行。在污染源监督监测中,对于发光抑制率低于60%、无法求出EC50的样品,采用等效毒性参照物的质量浓度表征废水的毒性;对于发光抑制率高于60%,采用稀释因子表示样品的毒性更直观可靠。     

钝顶螺旋藻突变株FBL的生理特性

利用倍频Ｎｄ：ＹＡＧ激光（λ＝５３２ｎｍ,ｐ＝５００ｍＷ,Ｓ＝１６０ｍＷ／ｃｍ＾２）对钝顶螺旋藻进行诱变处理,辐照１０ｍｉｎ,经分离获得藻丝开矿变成直形的钝顶螺旋突变株ＦＢＬ。对该变株ＦＢＬ的生长特性、藻多糖、氨基酸、β－胡萝卜素、叶绿素ａ等生化组成的研究。结果表明：与出发株相比,突变株ＦＢＬ生长速度加快;β－胡萝卜素含量提高２２．３％;藻多糖提高４２．０％;氨基酸增幅５．２％,氨基酸的组成比例发     

2,4-dichlorophenoxyacetic acid (2,4-D) micropollutant herbicide removing from water using granular and powdered activated carbons: a comparison applied for water treatment and health safety

Abstract

Activated carbons are well-known porous materials as an effective adsorbent used for the removal of emerging contaminants, such as herbicides, which are increasingly present in water bodies. Most water treatment plants, specially in Brazil, are unable to completely remove such contaminants by the conventional process and advanced treatment using activated carbons is required. The aim of this paper was to verify the influence of the activated carbons granulometry and specific surface area on the 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide removal efficiency using distilled-deionized water and filtered water collected from a conventional Water Treatment Plant. Commercial activated carbons samples used in this work were obtained from two different manufacturers. Activated carbons were analyzed by the specific surface area, pore size and volume distribution, nuclear magnetic resonance, infrared and x-ray spectroscopy, moisture, volatile matter and ash contents. Batch adsorption isotherms experiments were used and performed by Langmuir and Freundlich models. Granular and powdered activated carbons removed over 99% of 2,4-D in distilled water and near to 99% using filtered water. The activated carbons evaluated in this work presented high performance and played a key role in water treatment by removing 2,4-D herbicide, ensuring the protection of human health and the ecosystem.     

Development of inherent safety and health index for formulated product design

The numerous formulated products which are introduced to the market consist of chemical ingredients that may cause various safety and health hazards to the consumers. Therefore, it is extremely important to practice a systematic methodology to formulate products with acceptable safety and health performances. This work presents an index-based methodology to assess the safety and health hazards of the ingredients during the early formulation stage of product design. Hence, new inherent safety and health sub-indexes are introduced to improve the current safety and health hazards that are needed in formulated product design. The inherent safety and health sub-indexes are assigned with scores based on the degree of potential hazards. A higher score indicates a higher safety risk or severe health effect, and vice versa. The proposed methodology will greatly assist the users to identify the adverse safety and health effects caused by the ingredients. Hence, it is pivotal to eliminate or reduce the safety and health impacts from product usage. A case study on common ingredients used in the formulation of paint is presented on this study to describe the proposed method.     

苯胺降解菌的分离和特性研究

从活性污泥中分离到一株细菌ＡＮ３，能以苯胺为唯一碳源、氮源和能源生长．经鉴定为食酸丛毛胞菌（Ｃｏｍａｍｏｎａｓａｃｉｄｏｖｏｒａｎｓ）．该菌株可以在高达５０００ｍｇ／Ｌ以上的苯胺中生长．当苯胺浓度为２０００ｍｇ／Ｌ左右时，经３天培养即可全部被降解．该菌株还可以利用乙酰苯胺，但不能利用其他取代类苯胺化合物．ＡＮ３菌的生长和降解苯胺的最适温度为３０℃和ｐＨ为７０．９种金属离子对该菌的生长和苯胺的降解均有不同程度抑制作用，尤以Ａｇ＋和Ｈｇ２＋为明显．该菌与苯胺降解代谢有关酶类的测定结果表明，该菌含有的邻苯二酚－２，３加双氧酶是诱导酶．     

投加硝化菌的活性污泥工艺硝化效率特性

研究了在活性污泥工艺中用投加硝化菌的方法提高硝化效率的特性，试验用富氮废水生成硝化污泥，并将其剩余硝化污泥投加于处理初沉市政污水的活性污泥工艺试验装置，研究结果表明，投加硝化菌能降低常规活性污泥工艺硝化的泥龄要求、改善硝化效果以及减少为低温稳定运行而增加的硝化反应器容积。     

A new environmental chamber for evaluation of gas-phase chemical mechanisms and secondary aerosol formation

A new state-of-the-art indoor environmental chamber facility for the study of atmospheric processes leading to the formation of ozone and secondary organic aerosol (SOA) has been constructed and characterized. The chamber is designed for atmospheric chemical mechanism evaluation at low reactant concentrations under well-controlled environmental conditions. It consists of two collapsible 90 m³ FEP Teflon film reactors on pressure-controlled moveable frameworks inside a temperature-controlled enclosure flushed with purified air. Solar radiation is simulated with either a 200 kW Argon arc lamp or multiple blacklamps. Results of initial characterization experiments, all carried out at 300–305 K under dry conditions, concerning NO_x and formaldehyde offgasing, radical sources, particle loss rates, and background PM formation are described. Results of initial single organic–NO_x and simplified ambient surrogate–NO_x experiments to demonstrate the utility of the facility for mechanism evaluation under low NO_x conditions are summarized and compared with the predictions of the SAPRC-99 chemical mechanism. Overall, the results of the initial characterization and evaluation indicate that this new environmental chamber can provide high quality mechanism evaluation data for experiments with NO_x levels as low as 2 ppb, though the results indicate some problems with the gas-phase mechanism that need further study. Initial evaluation experiments for SOA formation, also carried out under dry conditions, indicate that the chamber can provide high quality secondary aerosol formation data at relatively low hydrocarbon concentrations.