两种铁基材料对污染农田土壤砷、铅、镉的钝化修复

制备得到了铁钙（FeCa）和铁锰（FMBO）两种铁基材料,用于钝化修复As、Pb和Cd污染土壤.研究采集了来自绍兴上虞（SY）、广东佛山（FS）、广东韶关（SG）、湖南浏阳（LY）、江西赣州（GZ）、贵州独山（DS）和安徽马鞍山（MAS）的7种重金属污染水稻土（潮泥土）,通过土壤培养试验,研究铁钙材料（FeCa）和铁锰材料（FMBO）对各类土壤溶液中As、Pb和Cd浓度动态变化的影响,对土壤中有效态As、Pb和Cd钝化效果的影响,以及在不同种类土壤中有效态As、Pb和Cd钝化效果差异及影响因素.结果表明,培养过程中,铁基材料处理下土壤溶液中As、Pb和Cd浓度均低于对照处理.研究发现,两铁基材料均能对土壤中As、Pb和Cd起到较好的钝化作用,相同添加量下,铁钙材料对土壤As的钝化效率优于铁锰材料,而材料之间对土壤Pb和Cd钝化效率无显著差异.铁钙材料处理下各种土壤As钝化效果表现为GZ > SG > DS和MAS,土壤铅钝化效果表现为FS>SY、LY和SG>MAS,土壤镉钝化效果表现为SY、GZ和DS>MAS;铁锰材料处理下各种土壤As钝化效果表现为SY、LY和GZ > DS > FS,土壤Pb钝化效果表现为FS > GZ > SY,土壤Cd钝化效果表现为DS > LY > MAS.各种土壤As钝化效率在两铁基材料处理下均与土壤黏土含量呈显著负相关,各种土壤Pb钝化效率在两铁基材料处理下均与土壤pH呈显著正相关,各种土壤Cd钝化效率在铁钙材料处理下与土壤黏土含量显著负相关.总体来看,两铁基材料均适用于各不同种类As、Pb和Cd污染土壤的治理.     

在线加湿条件下开放源类微粒子排放数学模型的建立

利用实验室微粒子控制模拟试验装置,采用粉体物料自由下落溢出随机粉尘的试验方法,研究了在线加湿条件下开放源类粉体物料自由下落过程中微粒子排放特性;在一定动力因素条件下,探讨了微粒子含量、质量流量、含水率、样品种类、空气相对湿度、加湿流量和加湿压力等因素对开放源物料中微粒子排放率的影响;通过数学归纳和模型化处理,建立了在线加湿条件下开放源类粉体物料自由下落过程中大气微粒子排放率的数学模型;并对所建立的数学模型进行了优化. 结果表明,模型计算值与试验值基本一致.      

利用废弃物煅烧水泥时重金属Pb、Cd的逸放污染

利用废弃物作为代替原料煅烧水泥已广泛应用于水泥生产,但其带来的环境污染问题不容忽视。以利用废弃物生产水泥的厂家为研究对象,采用原子吸收分光光度法检测所采集样品中重金属Pb、Cd的含量,对水泥生产过程中重金属Pb、Cd的逸放及其对周围土壤的污染进行研究。研究结果表明：利用废弃物煅烧水泥的过程中,重金属Pb、Cd的逸放率很高,其中立窑的Pb、Cd逸放率高达84％～90％。湿法回转窑的Pb、Cd逸放率达到63％～74％;在水泥厂上下风向500m、1000m和2000m处采集土壤样品,工厂周围的土壤均已受到不同程度的重金属污染,位于工厂下风向的土壤受到的污染更为严重,距离工厂500m处土壤中重金属Pb、Cd的含量均超过了国家标准的最大限量;对几家工厂员工的头发进行随机取样,头发样品中Pb含量均超过正常限量：     

Effects of carrying handles,postures, materials and distances on carrying capability

This study recruited 14 industrial workers to examine the effects of carrying handles, postures, materials and distances on maximum acceptable weights of carrying (MAWC), and resulting heart rate and body rating of perceived exertion (RPE) for a 20 min intensive carrying task. This study showed that MAWC of carrying with bar handles, carrying with hands-and-body posture, solid materials and 4?m distance were significantly higher than that of carrying with groove handles, carrying with hands posture, liquid materials and 8?m distance, respectively. The resulting heart rates while carrying MAWCs of groove handles, hands-and-body carrying posture, solid materials and 4?m distance were lower than the resulting heart rates while carrying MAWCs of bar handles, hands carrying posture, liquid materials and 8?m distance, respectively. Most pair levels of independent variables resulted in similar body's RPEs except for the pair levels of carrying distance.     

Evaluation of recycling efforts of aircraft companies in Wichita

The number of manufactured aircraft has been continuously increasing worldwide because of the high demand for airline transportation. During manufacturing, many advanced materials and devices are used to build various sizes and shapes of aircraft. However, most of these materials and devices require considerable energy and labor to produce, so reusing these at any life stage of the aircraft offers many economic and environmental benefits, and is considered lucrative and environmentally responsible. Several recyclable materials—composites, metals and alloys, wires, wood, paper, plastics, electronics, and avionics—emerge as waste streams during the manufacturing of aircraft. Many aircraft companies have been recycling these materials to remanufacture aircraft parts or other products for more sustainable production. In the present study, we evaluated the recycling efforts of local aircraft companies in Wichita, KS. These efforts were considered in terms of recycling efficiency/rate and environmental benefits. These included cradle-to-gate (CTG) life-cycle inventory analysis of the materials, carbon dioxide emissions, virgin material replacement with recycled materials, and natural resources usage. Our findings show that there exists a significant potential for contributions to sustainability as well as environmental and health benefits in the region from recycling by aircraft manufacturing plants.     

Water purification with sintered porous materials fabricated at 400℃ from sea bottom sediments

A sintering technology for preparing porous materials from sea bottom sediments was developed for use in water purification. The purpose of the present study was to develop methods for converting the sea bottom sediments dredged from Ago Bay into value-added recycled products. The sintered products fabricated at 400℃ were found to be very effective adsorbents for the removal of heavy metals.     

奶牛粪高温堆肥保氮与除臭技术实验研究

采用高温堆肥模拟试验研究了有效微生物EM和两种调理剂稻草、蚯蚓粪在奶牛粪堆肥中保氮和除臭的效应及各自适宜的添加比例。结果表明,在高温条件下,EM、稻草和蚯蚓粪均可明显降低奶牛粪中NH3和H2S的挥发,EM各添加比例的NH3去除率为7.06%～11.80%,H2S去除率为5.30%～10.81%;稻草各添加比例的NH3去除率为11.76%～66.03%,H2S去除率为10.63%～60.28%;蚯蚓粪各添加比例的NH3去除率为10.07%～50.75%,H2S去除率为13.95%～56.78%。同时,随着添加比例的提高,有效微生物EM、稻草和蚯蚓粪对NH3和H2S的去除率增大,达到奶牛粪堆肥中最大的保氮除臭效果时,EM的添加比例为3%、稻草的添加比例为30%、蚯蚓粪的添加比例为10%。     

再生塑料粉煤灰复合材料井盖

将废塑料、粉煤灰、农作物秸杆等固体废弃物通过自主创新技术成功地制备了市政工程制品：井盖、井箅等。具有抗压、抗冲击性能优良;成本低;环境友好;美观;安全等特性。     

纸浆模塑缓冲材的技术研究

聚苯乙烯发泡塑料（EPS）作为缓冲包装的内衬件广泛用于电子产品的内包装,但其所带来的白色污染问题也日益严峻。研究以再生资源（废纸）为原料,生产产品内衬包装物——纸浆模塑缓冲材,并使其产业化,以替代发泡塑料包装物,改变发泡塑料包装物难降解所带来的污染和危害,并实现“废弃物—产品”的资源循环利用。     

纳米材料的表面修饰和表征技术

介绍了纳米粒子的表面改性及表面修饰的目的和方法,并对纳米微粒表面改性的各种方法原理及其特点进行了归纳;对纳米材料的常用分析和表征技术做了概括,主要从纳米颗粒的粒度测量、纳米微粒的表面分析、成分分析等方面进行了简要阐述;对纳米材料的表面修饰和表征技术的发展进行了展望。