“一一·二四”海难渤海风场的数值模拟

用中尺度数值模式 ＭＭ５对 １９９９年 １１月 ２４日烟台附近发生重大海难事故的渤海风场进行了数值模 拟，探讨了该次冷锋大风的风场特征和影响机制．结果表明：用９０ｋｍ的粗网格可以成功地模拟地面冷高压 与锋面的发展和移动，以及高空环流形势的演变．而通过３０ｋｍ细网格的模拟发现，在冷锋后的行星边界层 中．存在着一条宽度为 ２００ ｋｉｎ的中尺度强风带，最大风速位于 ９２５ｈＰａ，它与高空的极锋急流并不相连；细 网格还模拟出了渤海中尺度低压的发展过程，它使近地面层大风的强度显著加强．模拟还表明，海陆差异对 近地面的风场分布有重要的影响，强风带移入渤海后，在渤海海域形成一个 ２００—３００ ｋｍ的中尺度强风 区．因此，采用具有较高分辨率的中尺度数值模式，对提高渤海大风的预报水平，避兔海难事故的发生更具 有重要意义．     

Satellite and Ground Based Monitoring of Aerosol Plumes

Plumes of atmospheric aerosol have been studied using a rangeof satellite and ground-based techniques. The Sea-viewing WideField-of-view Sensor (SeaWiFS) has been used to observe plumesof sulphate aerosol and Saharan dust around the coast of theUnited Kingdom. Aerosol Optical Thickness (AOT) was retrievedfrom SeaWiFS for two events; a plume of Saharan dusttransported over the United Kingdom from Western Africa and aperiod of elevated sulphate experienced over the Easternregion of the UK. Patterns of AOT are discussed and related tothe synoptic and mesoscale weather conditions. Furtherobservation of the sulphate aerosol event was undertaken usingthe Advanced Very High Resolution Radiometer instrument(AVHRR). Atmospheric back trajectories and weather conditionswere studied in order to identify the meteorologicalconditions which led to this event. Co-located ground-basedmeasurements of PM₁₀ and PM_2.5 were obtained for 4sites within the UK and PM_2.5/10 ratios were calculatedin order to identify any unusually high or low ratios(indicating the dominant size fraction within the plume)during either of these events. Calculated percentiles ofPM_2.5/10 ratios during the 2 events examined show thatthese events were notable within the record, but were in noway unique or unusual in the context of a 3 yr monitoringrecord. Visibility measurements for both episodes have beenexamined and show that visibility degradation occurred duringboth the sulphate aerosol and Saharan dust episodes.     

氰化物测定机理的研究

研究了酒石酸-硝酸锌法提取易释放氰化物，磷酸-EDTA提取总氰的机理；对异烟酸-吡唑啉酮光度法测定氰化物的条件作了探讨。     

大气污染与平流层气溶胶

本文简述了大气污染与气溶胶的关系，论述了平流层气溶胶对地球辐射收支的影响，从而说明平流层气溶胶的光学性质的变化将影响全球大气环境，在此基础上，计算了不同背景平流层气溶胶的光学常数和光学特性参数。并使用模式光学常数计算了３种火山模工气溶胶的光学特性参数。同时，考察了这些特性参数对光学常数的敏感性。结果表明，后向散射系数对光学常数的变化最敏感，对于某些波长，它的相对变化可比光学常数的相对变化大一个数量     

中空纤维膜应用于烟气脱硫的现状与前景

本文介绍了中空纤维膜的基本情况,概述了中空纤维膜烟气脱硫技术的研究现状,并对其发展前景进行了展望。     

石油化工装置污染源分析

对石油化工行业三大典型工艺,即炼油、乙烯和化纤的污染源产生情况及特性进行分析,找出不同装置废气、废水、固体废物等污染源产生的特点和共性,以利于石油化工项目的环境影响评价工作中污染源产生情况的准确分析和评价。     

尿素基纤维的制备及对水中Cu2+和Cd2+的吸附

以棉纤维为原料，经氯化和取代反应，制得尿素基纤维并用于水中Cu^2＋和Cd^2＋的吸附，考察了各种因素对吸附效果的影响。尿素基纤维对Cu^2＋和Cd^2＋的吸附可用Langmuir等温吸附方程描述，吸附过程可看成单层吸附。较佳吸附条件：重金属离子溶液pH为5，流量为7mL／min。用过的尿素基纤维经2mol／L的盐酸洗脱再生后，对Cu^2＋的吸附、解吸、再吸附的性能良好，可重复使用。     

Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review

Studies on the use of natural fibers as replacement to man-made fiber in fiber-reinforced composites have increased and opened up further industrial possibilities. Natural fibers have the advantages of low density, low cost, and biodegradability. However, the main disadvantages of natural fibers in composites are the poor compatibility between fiber and matrix and the relative high moisture sorption. Therefore, chemical treatments are considered in modifying the fiber surface properties. In this paper, the different chemical modifications on natural fibers for use in natural fiber-reinforced composites are reviewed. Chemical treatments including alkali, silane, acetylation, benzoylation, acrylation, maleated coupling agents, isocyanates, permanganate and others are discussed. The chemical treatment of fiber aimed at improving the adhesion between the fiber surface and the polymer matrix may not only modify the fiber surface but also increase fiber strength. Water absorption of composites is reduced and their mechanical properties are improved.     

用改性活性碳纤维去除CO2原料气中的H2S

采用固定床动态吸附实验，用改性活性碳纤维（ACF）吸附去除CO2原料气中的H2S。通过改变改性剂种类、反应温度和原料气中CO2浓度，找出用改性ACF去除CO2原料气中H2S的规律。实验结果表明：常温下，可用NaON改性的ACF来消除CO2的酸性对去除H2S的不利影响；随着反应温度的升高，CO2与ACF形成的C（O＊）中间产物增多，CO2的存在有利于改性ACF去除H2S；而当反应温度过高时，CO2与ACF形成的C（O＊）中间产物发生分解，导致ACF碳化，不利于H2S的吸附去除。     

活性炭纤维复合材料的脱硫性能

本实验以粘胶基活性炭纤维和酚醛树脂复合，制备出了一种可用于烟气脱硫的活性炭纤维复合材料（ACFM），考察了制备工艺条件对脱硫性能和比表面积的影响，测试其在填充床的压降。结果表明：粘结剂用量、炭化及活化条件对样品的脱硫性能和比表面积有较大的影响；与其他活性炭材料相比ACFM压降相对较低，只有活性炭纤维的1／20。