单臂冠醚—金属卟啉配合物的合成与表征

利用磺酰氯键将苯并15-冠-5和5-(2-羟基苯基)- 10,15,20-三(4-硝基苯基)交联,合成了单臂冠醚一卟啉配体(CNTPP)及其金属配合物(CNIPPMn和CNTPPCo).通过红外光谱、紫外吸收光谱与光电子能谱对化合物和配合物进行结构分析表明,在489cm-1和480cm-1出现M-N键的吸收蜂,在1360cm-1和1363cm-1处有S=O键吸收峰.配位中心离子进入卟啉环后引起配合物CNTPPM分子的对称性提高,使Sorct带发生位移,且N原子与金属离子形成配位键后,其中一对N电子结合能升高,另外一对N原子下降,且导致配合物中M2p3/2的电子结合能变大.     

Fe0-CNTs-Cu活化O2降解水中2,4-二氯苯酚

为高效去除废水中长期残留、高毒性、难生物降解的氯苯酚类污染物,采用高能球磨-高温熔融-液相还原法制备能将氧气高效且选择性地还原为H₂O₂同时将原位产生的H₂O₂分解为·OH/O₂·^-的新型材料（Fe⁰-CNTs-Cu）,探讨了条件因素对2,4-二氯苯酚（2,4-DCP）降解效果的影响,初步分析了Fe⁰-CNTs-Cu/O₂体系的降解机理,并推测了2,4-DCP该体系下的降解途径.结果表明,Fe⁰-CNTs-Cu在优化条件下对2,4-DCP的降解率和TOC去除率分别为92.3%和54.2%.在Fe⁰-CNTs-Cu/O₂体系中形成腐蚀电池,促使O₂在CNTs表面选择性还原为H₂O₂,Cu⁰和Cu₂O、CNTs以及原位产生的Fe²⁺,将原位产生的H₂O₂催化分解为高氧化物质·OH/O₂·^-,高效氧化降解2,4-DCP.     

Experience in Combined Glaciological and Botanical Studies on the Primary Plant Successions on Young Moraines in the Central Altai

Data are presented that concern specific features of primary plant community formation on the moraine complex of the Malyi Aktru Glacier (2190–2300 m a.s.l., Severo-Chuiskii Ridge, Central Altai), which dates from the Minor Glaciation Period. The main stages and rate of primary plant succession in the areas that became free of ice 1–150 years ago are discussed.     

铁(Ⅲ)-草酸盐配合物的光化学性质及其对天然水相中有机物光降解的作用

本文综述了天然水相（大气水相、地表水等）中Ｆｅ（Ⅲ）－草酸盐配合物的含量与分布、光化学性质、对天然水相中有机物的降解、及其在废水光化学处理中的应用研究及前景。     

铁锰复合氧化物吸附去除五价锑性能研究

对比研究了铁锰复合氧化物(FMBO)、羟基氧化铁(FeOOH)和二氧化锰(MnO₂)吸附去除五价锑(Sb(V))的性能.结果表明FMBO对Sb(V)具有很好的吸附性能,在pH=5.0的条件下,最大吸附容量达到1.05 mmol·g^-1,略高于FeOOH (0.82 mmol·g^-1)及远高于MnO₂ (0.43 mmol·g^-1);采用Freundlich模型可以很好地描述Sb(V)在FMBO的吸附行为(R² = 0.98).就吸附动力学而言,假二级动力学可很好地描述Sb(V)在FMBO (R² = 0.93)和MnO₂表面的吸附过程(R² = 0.96),而Sb(V)在FeOOH表面的吸附过程可用Elovich模型拟合 (R² = 0.94).Sb(V)的吸附量随着pH值的升高而降低;磷酸盐显著抑制了Sb(V)的吸附,而硫酸盐和碳酸盐影响不大.提高体系离子强度可促进Sb(V)在FMBO表面的吸附,推断Sb(V)在FMBO表面形成内层络合物后被吸附去除.     

铜、锌氰配合物在离子交换纤维上的扩散、吸附机理

运用Boyd液膜扩散公式和范山鹰等提出的扩散模型,考察了碱性溶液中铜、锌氰配合物在离子交换纤维上的扩散行为;通过分析吸附前后纤维上官能团的位置变化以及解吸前后纤维上元素含量的变化,研究铜、锌氰配合物在纤维上的吸附机理。实验结果表明,离子交换纤维对铜、锌配合物的吸附在反应初期,以液膜扩散为主控制步骤,反应后期,以空隙扩散为主控制步骤。并运用离子交换纤维在水溶液中具有类似胶体型物质的双电层结构解释了不同控制阶段吸附速率不同的原因,虽然各阶段吸附速率有所不同,但纤维对铜、锌氰配合物的吸附均为离子交换机制。     

Selective metal leaching from technosols based on synthetic root exudate composition

This study focused on metal release from technosols induced by synthetic root exudate (SRE). The effect of SRE composition on metal release was studied using six technosols. This was done by treating the technosols with SRE solutions having varying concentrations of low molecular weight organic acids (LMWOAs), namely oxalic, citric, and malic acids. Consequently, the physico-chemical parameters (pH and electric conductivity), Ca, Mg, Fe, Zn, and Cu release (by atomic absorption spectroscopy, AAS), chemical changes (by Fourier transform infrared, FT-IR), and organic parameters (by fluorescence) were investigated. Metal release showed to be dependent on the SRE composition and technosol characteristics. Citric acid selectively released Ca, Mg, Zn, and Cu from technosols in a concentration-dependent manner; oxalic acid showed a significant role in the release of Mg and Fe. Under relatively high LMWOA concentrations, particulate organo-mineral complexes precipitated. Additionally, technosol weathering was seen by the dissolution of humic substances and ferriallophanes, which in turn caused metal release. However, re-precipitation of these phases showed to re-sorb metals, thus underestimating the role of LMWOAs in metal release. Therefore, the selective metal leaching was highly dependent on the SRE composition and LMWOA concentrations on one hand, and on the mineral, organic, and organo-mineral components of the technosols on the other. The understanding of such processes is crucial for proposing and implementing environmental management strategies to reduce metal leaching or for the beneficial re-usage of metals (e.g., for agromining) from technosols.     

Biodegradable Complex Polymers from Casein and Potato Starch

Potato starch was blended with defatted milk in proportions providing a 4:1, 3:1, 2:1, 1:1, 1,:2, 1:3, and 1:4 starch/casein ratio. Precipitation was achieved by addition of either hydrochloric acid or leaven. Composition of precipitated products was determined based on elemental analysis for nitrogen. Generally, differences between attempted and achieved casein-to-starch proportions did not exceed 10%. Products coprecipitated with hydrochloric acid were slightly richer in casein than products obtained with leaven. Aqueous solubility, water binding capacity, IR spectra, and thermal analysis (thermogravimetry, TG, and differential thermogravimetry, DTG) were recorded for the precipitates. Analyses revealed that the precipitates were not simple physical mixtures of the components. Partial insolubility in 7 M aqueous urea showed that casein and potato starch are chemically bound. Comparison of the spectra and thermograms suggested that complexes of the 1:1 composition were formed constituting a nucleus of the aggregates carrying excessive amounts of either starch or casein.