臭氧氧化降解苊的中间产物分析

苊属于EPA优先污染物名单上的物质,其在染料、化工等行业有着广泛的应用.它具有水溶性低、易蓄积、难生物降解的特点.臭氧氧化法可以对其有效的降解,但是过量的臭氧也难以实现对苊的矿化,在苊浓度下降的同时将生成中间产物.中间产物包括多种含一个苯环的酯和直链的酸、醇、酯等.     

双降解地膜生物降解及降解产物的研究

本文主要介绍了双降解地膜生物降解性。包括生物接种，田间复膜土壤菌群分析等各种生物检测方法。并对复膜土壤中降解产物的化学检测方法也简要做了介绍。     

从LCA角度评价塑料用品与木制用品对环境的影响

通过对一次性塑料与纸制用品（木制品）的评价研究的基础上，对木制品与塑料制品从生命周期评价（LCA）的角度上对问题作进一步的探讨和研究，得出结论为塑料制品为环保型产品。     

The influence of high initial concentration aqueous-phase TCE on the performance of iron wall systems

Flow-through column tests were conducted to investigate the performance of iron wall remediation systems for the degradation of aqueous-phase trichloroethylene (TCE). Concentration profiles under steady-state transport conditions were generated by measuring TCE concentrations at sample ports located at various locations along the length of the column. The results indicated that a pseudo-first-order model is adequate at describing degradation kinetics for low initial TCE concentrations, but not for higher initial concentrations. The deviation from pseudo-first-order kinetics can be explained by interspecies competition for reactive sites between TCE and a dominant reaction product. A modification of the pseudo-first-order model that accounts for product interference predicts laboratory data for high initial concentration profiles, but deviates slightly as initial concentrations approach the solubility of TCE. The data clearly demonstrate the importance of accurately describing reaction kinetics for the purpose of designing iron wall treatment systems.     

Purification and molecular weight distribution of a key exopolysaccharide component of Bacillus megaterium TF10

Extracellular polymeric substances (EPS) are organic metabolic compounds excreted by microorganisms. They largely impact microbial aggregate structures and functions. Extracellular polysaccharides (EP) in EPS are responsible for the formation of microbial aggregates. In this work, we successfully separated and characterized EP from EPS of the bacterium Bacillus megaterium TF10. Extraction of EP from EPS was optimized using Sevag''s reagent. Chemical characteristics, functional groups, and molecular weight (MW) distribu-tion of EP were compared with the harvested EPS and soluble microbial products (SMP). We found that the polymers of lower MW and free proteins were successfully removed by Sevag''s reagent. The higher MW components of EPS were predominantly polysaccharides, while the polymers of lower MW tended to secrete to the supernatant and were described as SMP. A part of the proteins in the EP was polysaccharide-bonded. Our results can be further used in elucidating the complex flocculation mechanisms in which EP play a major role.     

曝气强度对膜生物反应器污泥混合液可滤性的影响

主要研究了曝气强度对膜生物反应器(MBR)膜污染的影响.2套MBR采用恒流出水模式连续运行60 d,曝气强度分别为500及100 L/h,应用死端过滤装置来检测不同阶段污泥混合液的可滤性.实验中对不同曝气强度下的溶解性微生物代谢产物(SMP)分子质量分布、颗粒粒径分布、胞外聚合物(EPS)含量进行了测定.结果表明,过高的曝气强度将恶化污泥混合液的可滤性,增加了膜污染速率.进一步研究表明,曝气强度的增加导致了污泥混合液上清液中相对分子质量>10000的SMP浓度的增加,此部分大分子有机物浓度直接影响了污泥混合液的可滤性.过高的曝气强度也导致了污泥絮体中1～10μm细小颗粒和EPS含量的增加.     

电子信息产品的生命周期评价

电子信息产品的大量生产与使用造成严重的环境污染,影响着人类健康和生态安全。利用生命周期评价技术对电子信息产品的原材料获取、生产、销售运输和使用阶段进行环境影响分析,并得出电子产品在使用阶段的环境影响最为重要。生产商不但要关注生产过程中的环境影响,更应该注重生产低能耗产品。     

温度对膜生物反应器运行特性及膜污染的影响

温度对膜生物反应器（MBR）污染物去除效果和膜污染速率都有很大的影响。采用两套相同的MBR蓑置在冬季运行,其中一套维持20℃的恒温,另一套水温与周围环境相同。对两套装置处理效果及膜污染速率进行对比,并通过反应器中溶解性微生物产物（SMF）、胞外聚合物（EPS）含量、污泥粒径分布扣膜面污染物的比较,分析温度对MBR运行的影响。研究结果表明膜对污染物的截留能有效补偿低温时微生物作用的不足,因此低温对出水水质并没有显著的影响。此外,低温时虽然SMP和EPS的释放增加,但并没有引起膜污来的加剧。相反地,低温时污泥粒径较高温时小,而粒径较大的颗粒更易沉积于膜表面,因此低温时膜面固体物质含量较低,膜污染速率反而比高温时低。     

絮凝沉降处理乳业废水的研究

用硫酸铝PAM混合絮凝剂净化乳制品行业废水,寻找一种最佳的处理方案。通过多组实验显示：硫酸铝投入量280mg／L,pH值为6—7,水温20℃,搅拌速度为40～70r／min时,经处理的废水外观清晰、透明度高,COD去除率均在80％左右,对保障乳品行业的可持续发展起到科学的借鉴作用。     

O3/H2O2降解Atrazine效能研究

利用O3/H2O2降解莠去津,对氧化产物进行了色谱分析,以评价该体系降解莠去津效能.莠去津初始浓度2 mg/L,7.5mg/L的O3单独氧化去除率为27.2%;相同O3投量下,H2O2/O3摩尔比0.75时,5 min莠去津的去除率最高可达96.5%,表明H2O2/O3体系对莠去津的去除效果良好,降解速度快.以离子色谱对产物的离子进行分析,莠去津浓度下降的同时,硝酸根和氯离子浓度增高.GC-MS检测的产物和对LC-MS谱图的分析表明,有机产物中存在脱乙基、脱异丙基和脱氯莠去津,说明H2O2/O3并不能彻底氧化莠去津,因此工程中作为主要去除单元或突发性污染事件的应急手段可能还需要与活性炭等单元联用.