利用废渣废碱液年产3000t粒状五水偏硅酸钠工艺初步设计

介绍以铝矾土提取硫酸铝废渣和氧氯化锆副产废碱液为原料生产泡花碱 ,然后利用一次造粒法生产五水偏硅酸钠新工艺确定影响产品质量指标工艺因素。小试试验产品质量指标达到HG/T2 5 6 8- 94要求 ,工艺成本低 ,避免废碱液及废渣排放对环境的污染。     

城市污水处理厂工艺和自控系统

归纳了城市生化污水处理厂工艺、自控系统的构成和作用，具体分析了沈阳市北部污水处理厂自控系统     

预防水体黑臭的水质指标研究

水体黑臭的指标，是研究其成因，判断其黑芨科学合理地管理水体的重要内容，该文选择了与一黑臭生化过程有关的的一些参数，进行了理场和模拟试验测定研究，结果证明ＤＯ、ＢＯＤ５、硫酸还原菌数等，与水体黑臭具有较好的相关性。水体黑臭与不黑臭的临界指标为：ＣＨ－２１．５，ＤＯ＝１．８ｍｇ／Ｌ，Ｎ＝２０００个／ｍｌ，ＢＯＤ５＝１４ｍｇ／Ｌ。     

膜生物反应器与传统活性污泥工艺除污特性比较

比较了膜生物反应器（MBR）和传统活性污泥工艺（CAS）在相同运行条件下对生活污水的除污特性.结果表明,MBR系统对COD、NH3-N和TN的平均去除率比CAS分别高14.4%、51.2%和37.3%.但MBR中膜的截留使系统相对比较封闭,制约了通过排放高磷污泥的生物法除磷,除磷效率仅为32.9%,低于CAS工艺（43.0%）;将MBR与化学除磷工艺相结合,MBR系统除磷效率可达93.3%.     

运用过程分析法有效推进清洁生产

运用过程分析式清洁生产审计开展清洁生产，通过对工艺过程、作业活动的过程分析，充分查找物料流失环节及废弃物的排放点．不需过多的经济投入解决物料计量问题，不需用物料衡算方法，而且查找细致、全面、有效且易于操作，不易遗漏，更有利于企业的清洁生产。     

SBR工艺在中药生产废水处理中的应用

SBR工艺是对传统活性污泥法的改造中发展起来的一种工艺。根据SBR工艺在中药厂生产废水处理工程的实践,对SBR工艺进行进一步的研究与改进。当进水CODcr为250mg/L,BOD5为120mg/L;出水CODcr为49mg/L,BOD5为20mg/L;CODcr的去除率达80%,BDO5的去除率达83%,SBR工艺处理中药废水效果显著。     

Treatment of a dyeing wastewater from a woolen mill using an A/O membrane bio-reactor

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｄｙｅｉｎｇｗａｓｔｅｗａｔｅｒｏｆｗｏｏｌｅｎｍｉｌｌｃｏｎｔａｉｎｓａｌｏｔｋｉｎｄｓｏｆｐｏｌｌｕｔａｎｔｓ,ｓｕｃｈａｓａｃｉｄｉｃｄｙｅｓ,ｄｉｓｐｅｒｓｅｄｙｅｓ,ｍｏｒｄａｎｔｄｙｅｓ,ａｕｘｉｌｉａｒｉｅｓ,ｓａｌｔｓａｎｄｓｏｏｎ .Ｔｈｅｅｆｆｌｕｅｎｔｓｆｒｏｍｗａｓｔｅｗａｔｅｒｔｒｅａｔｍｅｎｔｐｌａｎｔｓｆｏｒｔｒｅａｔｍｅｎｔｏｆｔｈｅｄｙｅｉｎｇｗａｓｔｅｗａｔｅｒｏｆｗｏｏｌｅｎｍｉｌｌｓｗｉｔｈｎｏｒｍａｌｂｉｏｌｏｇｉｃａｌｐｒｏｃｅ…     

EM菌强化SBR脱氮除磷的试验研究

重点讨论了有效微生物群（EM）在SBR反应器中对生活污水的TP，NH3－N和TN和TN的去除效昆，结果表明，当EM投加量（VEM／V污水）为1／1000－1／1000时，能显著提高SBR工艺对TP，NH3－N和TN的去除率和降解速度，具有节能降耗的优点，当EM投加量（VEM／V污水）在1／1000－5／1000范围内，TN的去除率随EM量的增加而逐渐提高。     

序批式活性污泥法及其发展

SBR及其发展工艺具有其它工艺无可比拟的优势，特别是其良好的除磷脱氮功能。本文介绍了SBR及其发展工艺各自的工艺特点、优势及不足之处，为它们在生产实践中的进一步推广应用提供技术参考。     

Test of membrane bioreactor for waste water treatment in a petrochemical complex

Membrane bioreactor (MBR) used in water and waste water treatment is a developing technique for water pollution control and water reuse. This paper describes a membrane-bioreactor for treatment of waste water in a petrochemical complex. The experimental MBR was a lab scale one composed of an activated sludge bioreactor unit and an ultrafiltration membrane unit. The relationship of COD removal with MLSS and HRT in this MBR was studied. The effects of crossflow velocity, backwash interval and volume of flush liquid on the flux were discussed. The results showed that average removal of COD, oil, SS and turbidity in petrochemical waste water by the MBR was 91%, 86%, 92% and 99% respectively. The average removal of NH₃-N and total phosphorous was 85% and 82%. A coefficient of COD removal, k, was 0.017-0.080 L/(mg.d). The membrane flux maintained higher than 60 L/hm2 bar for 34 days without chemical cleaning when the velocity of crossflow was 3.5-3.9 m/s and the backwash interval was 30 minutes and backwash duration at 20 seconds. The results indicated that it is feasible for MBR technology to be used in petrochemical waste water treatment. The treated water could be considered as a source used to make up water for industrial cooling system or to be reused for other purposes.