电絮凝净化含聚污水影响因素研究

目的为保障油田正常安全生产,促进油田含聚污水的循环利用。方法采用电絮凝技术单因素研究方法开展净化含聚污水的静态实验研究,探讨外加电流密度、极板间距、初始pH及聚合物浓度等因素对净化效果的影响规律。结果当初始pH为7.0,电流密度为4.0 m A/m2,极板间距为1.0 cm,电解16 min时,综合处理效果最佳。此时,含油量与浊度去除率分别为98.85%,99.93%,处理每克油平均消耗为0.0494 g的Al,处理每立方米含聚污水的能耗为0.2895 k Wh。污水中的聚合物浓度越小,净化效果越好。结论中性处理,极板间距为1.0 cm,外加电流密度为4.0 m A/m2,通电16 min是最佳处理条件。     

基于VA One船舶舱室动力设备空气噪声控制分析

目的研究舱室间壁板不同约束条件及不同敷设方式对隔声量的影响。方法用VA One建立两个舱室的统计能量分析(Statistical Energy Analysis,SEA)模型,对约束阻尼结构和自由阻尼结构的隔声性能进行分析。针对约束阻尼结构,讨论其两侧金属层厚度差对整个壁板的隔声性能的影响;对自由阻尼结构,分析金属层与阻尼层之间的相对位置对其隔声性能影响。结果约束阻尼结构隔声量A计权声压级比自由阻尼结构高。结论阻尼层厚度和壁板总厚度一定时,自由阻尼结构金属层与阻尼层之间的相对位置对实际的隔声性能并没有影响;约束阻尼结构,两侧金属层等厚敷设时,其隔声效果最优,且两侧厚度差越大隔声量越小。     

环境升温过程对常温固化环氧树脂热力学性能的影响

目的提高常温固化环氧树脂体系的高温使用性能。方法采用常温固化剂T31、中温固化剂IPDA以及高温固化剂DDM作为混合固化剂,对E-44型和AG-80型混合环氧树脂体系进行常温固化反应,并分析环境升温过程对固化物热力学性能的影响。通过DMA分析、热变形测量、固化度测试,分别评价室温固化环氧树脂在环境升温过程前后的玻璃化转变温度、热变形量及体系内部的固化反应程度变化,并通过吸水率测试和弯曲强度测试对玻璃纤维布增强常温固化环氧树脂基复合材料的耐湿热性能以及高温条件下的力学性能进行分析。结果环氧树脂常温固化物的tg为85.21℃,经1.5℃/min的平均升温速率加热至90℃之后,该环境升温过程使固化物的固化度增大至92%以上,tg增长为132.06℃的同时热变形温度增大。其复合材料耐湿热性能提高,且100℃时弯曲强度的保持率为65%,对于加热至120℃的环境升温过程,固化物的固化度接近96%,tg增长为144.45℃的同时热变形温度进一步提高,其复合材料耐湿热性能改善程度更加明显,且130℃时弯曲强度保持率仍接近60%。结论常温、中温、高温混合固化剂的合理复配有助于环氧树脂体系在环境升温变化的诱导条件下发生梯度式固化反应,使体系内部的交联固化程度迅速升至较高水平,可以有效提高其玻璃化转变温度,显著改善常温固化环氧树脂体系在高温条件下的热力学性能。     

高效液相色谱测定花粉素中水溶性维生素

本文介绍一种灵敏而准确的高效液相色谱测定花粉素中五种水溶性维生素(即B_1、B_2、B_5、B_6和B_(12))方法。研究了移动相醋酸盐缓冲溶液的浓度和PH对色谱分离效果的影响,水溶性维生素的定量分析是用日立3011-N的填充柱(其内径为4毫米,长250毫米),以含有2.5％乙醇的醋酸钠-醋酸组成的缓冲溶液(PH6)作为移动相,在波长254纳米处进行紫外检测,变异系数和回收率分别为2-5％和91.0-101.5％。     

Floristics, performance and prognosis of historical trees in the urban forest of Guangzhou City (China)

Outstanding historical trees embedded in cities constitute pertinent environmental assets, yet they are widely threatened in third-world cities. Inadequate understanding of this valuable natural-cum-cultural heritage hinders proper conservation. A case study of Guangzhou in south China evaluated floristic composition, age profile and biomass structure of historical trees, assessed their performance in major habitats (institutional, park and roadside), and established a prognosis for future growth and management. The 348 historical trees examined belonged to only 25 species, vis-à -vis 254 trees in the entire urban forest, dominated by five species and native members. Roadside had more trees, followed by institutional and park, with merely the most common four species shared by all habitats. The limited commonality reflected tree-performance differentiation by habitats exerting selection pressure on species. The institutional growth-regime was more conducive to nurturing high-caliber specimens, whereas park is less capable. Individual species achievement by habitats, derived from tree-count ranking and relative-abundance indices, could inform species choice and tree conservation. Few trees exceeded 300 years of age in the millennium-old city, echoing a history of intense tree—city conflicts. Potential life-span, trunk and crown diameters indicated ample opportunities for further expansion of biomass and landscape impacts, which would be straitjacketed by the tightening urban fabric.     

Benchmarking for best practice environmental management

Benchmarking of environmental performance to demonstrate theachievement of best practice environmental management is acomponent of a new form of licensing of industrialdischarges in Western Australia. The paper describes theapproaches to benchmarking for the critical environmentalissues for an alumina refinery and wastewater treatmentplant. It also describes the lessons learnt from thebenchmarking process on appropriate methods, the benefitsand difficulties in the benchmarking process, and changesthat would assist benchmarking for best practiceenvironmental management.     

太湖水质氮素质量浓度时空差异特征及影响因素分析

通过对2014—2016年湖体水质中氮素质量浓度分析,结合出入湖总氮浓度、水量、湖体水生生态等影响因素,发现太湖水体中总氮浓度呈现逐年下降的趋势,各监测点位总氮为0.530 mg/L～5.51 mg/L,时空分布不均,差异明显。时间上,总氮浓度表现为春季最高,夏季和秋季最低,且月均值变化曲线呈现出规律的正弦函数波形。空间上,总氮浓度大致表现出由西部湖区向东部湖区递减的趋势,呈现西部湖区﹥北部湖区﹥南部湖区﹥湖心区﹥东部湖区。要改善湖体水质,不仅要切断污染源,而且要加强水生生态功能修复。     

DOAS大气环境质量监测系统与传统点式采样监测法可比性研究

系统比较了DOAS大气监测系统与传统点式采样设备在测定环境空气中二氧化硫的性能。     

标准BOD5测定法的"空气净化--稀释水曝气"装置研究

"稀释与接种法"是BOD5的标准测定方法,制备溶解氧接近饱和且不含能干扰生化耗氧过程的物质的稀释水,是该法重要的工作之一.由真空泵带动的"空气净化--稀释水曝气"装置,流程合理、装配容易、调控灵活,可连贯进行空气净化与稀释水曝气,而制取符合质量要求的稀释水.     

汽车尾气污染及其净化处理技术

本文详细阐述了汽车尾气的有害成份及其对人类健康的危害。为此 ,应该采取净化处理措施 ,减少或者消除有害气体的产生 ,为大气环境洁净而创造条件。