带压作业闸板防喷器胶芯失效机理研究

针对带压作业过程中闸板防喷器胶芯易失效的问题,以现场使用的带压作业闸板防喷器胶芯为研究对象,通过实验确定了橡胶基体的本构关系,利用ABAQUS软件对比研究了4种不同井筒压力对胶芯的疲劳失效与密封失效的影响。结果表明:分析结果与现场应用胶芯的失效位置相符,验证了分析的正确性;胶芯的疲劳失效位置集中在橡胶基体与闸板上下部的4个尖角接触区域,上部区域失效严重;井筒压力的大小影响橡胶基体密封面上的接触应力分布,但对耐磨块密封面上接触应力分布影响不显著。建议在橡胶基体与闸板上下部的4个尖角区域补强以增加胶芯寿命。     

Trapping pheromonal components with silicone rubber tubes: fatty acid secretions in honeybees (<Emphasis Type="Italic">Apis mellifera</Emphasis>)

Summary. We describe the use of pieces of silicone tubing to analyse the mandibular gland components of queen and worker honeybees and show that these compounds can be efficiently trapped on bis(trimethylsilyl)trifluoroacetamide (BSTFA) treated pieces of tubing. The use of this technique rather than that of solid phase microextraction (SPME) techniques with commercially available fibres that have been shown to be efficient at sampling secretions from the cuticle of insects, is necessitated by a requirement for collection of large sample numbers in a short space of time or for sampling in the field. The technique may be generalised for use with semiochemicals of low volatility in other insect communciation systems.     

公路隧道内危险物质泄漏扩散的研究

针对隧道内装有危险物质 (乙炔 )的载重车在行驶过程中发生小孔泄漏导致乙炔扩散的情况 ,建立了物理数学模型。即采用有限体积法和Simple算法 ,求解雷诺时均的Navier Stokes方程和k ε湍流模型。分析了车辆行使过程中危险物质释放前后隧道内的流场和两种释放方式下 (水平释放、垂直释放 )乙炔的浓度分布 ;针对不同的泄漏方式 ,考虑了后面跟随车辆及隧道顶部通风对乙炔扩散过程的影响 ;得出了有意义的结果 ,为进一步了解实际情况下危险气体扩散行为 ,并加以控制和减少事故提供了理论依据。     

空间碎片超高速碰撞的数值方法研究

应用非线性动力学数值仿真软件AUTODYN-2D对空间碎片的超高速碰撞问题进行模拟,研究不同数值计算方法和材料模型的适用范围,空间碎片形状对碎片云的影响,冲击相变等问题。结果表明,在研究超高速碰撞中普遍采用的SPH方法可以很好地模拟碎片云的情况,但是难以对冲击相变问题进行模拟,而采用侵蚀模型的拉格朗日方法可较好地反映冲击相变现象。Tilloston状态方程适用于描述冲击相变问题,包括汽化问题。Johnson-Cook强度模型用来对应变硬化、应变率硬化以及熔化等问题进行模拟。因此,在当速度足以使材料发生相变时,Tilloston状态方程和Johnson-Cook强度模型是比较好的选择。     

基于风险的有害物品运输的线路选择分析

为了选择风险尽量小的线路来运输有害物品,减小在运输此类物质时对道路两侧人口带来的风险,通过比较分析,在选择Gaussian模型基础上,将有害物品泄漏后果的概率函数法与人口的风险描述方法相结合,并根据运输中对风险标准的不同要求,结合实际运输过程中可供选择的不同线路的实际情况,得到一次运输中选择不同线路时所产生的相异风险值,从而为有害物品运输中如何通过最小化运输过程中的人口风险来选择线路提供了依据。通过算例分析,得到的结果与使用其它分析性工具得到的结论一致,但结果精确性更高,表明研究结果有很好的实用性,能对实际生产中避免因有害物品运输而带来重大事故有一定指导作用。     

船舶修造安全工程专业人才培养模式

介绍了青岛远洋船员学院基本情况和国内船舶修造行业发展简况以及学院安全技术管理专业建立的背景,并从培养模式、课程设置、教材建设、实践教学等4个方面阐述了我院船舶安全技术管理专业的教学计划制定情况.     

On Sustainable Development of Social Forestry in Bangladesh: Experiences from Sal (<Emphasis Type="Italic">Shorea Robusta</Emphasis>) Forests

Sustainability in forestry is a complex amalgam of trade-offs among its various dimensions and there is no easy route to achieve sustainable development. It is important that policy process and implementation strategy of these policies should be based on sound information about these trade-offs. There is a growing consensus amongst key forest decision-makers in Bangladesh that traditional forestry is needed to make the transition to more sustainable forestry, which is likely to involve local people in forest management. As a result, the government has initiated a social forestry program from 1981 with the assistance of the Asian Development Bank (ADB) loan and the United Nations Development Program (UNDP) grant and operated mainly in Sal forest areas. The most important objective of this program is to protect, manage, and develop forests in a sustainable way by involving local communities. Although several studies have focused on the management issues of social forestry, none of these studies has evaluated the indicators of sustainable social forestry. The purpose of this study is to evaluate the criteria of sustainable development of social forestry in Bangladesh. The study is based on primary cross-sectional data collected using the multistage stratified sampling technique. In total, 581 social forestry farmers were selected randomly and interviewed using a pre-tested questionnaire. The study evaluated some important components of sustainable development and identified the following conditions of social forestry in Bangladesh:(i) almost all the components of sustainable development of social forestry, although not at the aspiration level, were at good condition;(ii) participants were interested and committed to work with Forest Department in developing social forestry;(iii) they had been utilizing both hard and soft technology in practicing social forestry, although there exists ample scope of development;(iv) income of participants after involving in social forestry had increased, although not at satisfactory level; and(v) process of producing social and material goods had been under progress.However, there exist plenty of scopes for sustainable social forestry development through improving the sustainable development components more carefully.Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Dynamic Mechanical Properties of Soy Protein Filled Elastomers

Dynamic mechanical properties including temperature effect, stress softening, and Payne effect are studied on the elastomer composites filled with soy protein or carbon black. The comparison of protein composite with well-known carbon black composites provides further insight into the protein composites. The elastomers filled with soy protein aggregates give substantial reinforcement effect when compared with the unfilled elastomers. Approximately 400 times increase in shear elastic modulus was observed when 40% by weight of protein is incorporated into the elastomers. The sample films were cast from the particle dispersion of soy protein isolate and carboxylated styrene–butadiene latex. At the higher temperatures, the shear elastic modulus of soy protein-filled composites does not decrease as much as that of the carbon black-filled composites. The behavior of elastic and loss modulus under the oscillatory strain of different magnitude is similar to that of carbon black reinforced styrene–butadiene rubber. However, carbon black composites show a better recovery behavior after eight cycles of dynamic strain. The reduction of shear elastic modulus with dynamic strain (Payne effect) was compared with Kraus model and the fitting parameter related to the aggregate structure of the soy protein. A reasonable agreement between the theoretical model and experiment was obtained, indicating the Payne effect of the protein-related network structure in the elastomers could also be described by the kinetic agglomeration de-agglomeration mechanism.     

Poly(vinyl alcohol)/Compost Composites for Biofiltration of Swine Waste Volatiles

In this study, a Poly(vinyl alcohol)(PVA)/compost composite bead is prepared and is indicated suitable as a filter material for biofiltration. The optimal preparation process is with the compost size of 16–35 mesh, the ratio of water to compost of 40 g/15 g compost, and the immersion time in the phosphate solution of 60 min. The composite bead prepared by this process is a porous spherical particle with a diameter between 2.4 and 6.0 mm and a density of 0.96 g/cm³. It contains 9.43 mg P/g dry solid and 12.1 mg N/g dry solid. The equilibrium moisture content of the composite bead bed from adsorption and holding experiments is 50.5 and 54.6% on a wet basis respectively, which is about 1.74 times higher than that of swine manure compost bed. It corresponds to the optimal filter material required and is sufficient to sustain biological activity as the composite bead adsorbs equilibrium moisture. The bulk compressive strength of the composite bead bed is about 1.15 times larger than that of swine manure compost bed to ensure even distribution of air flow and reduce the head loss as the air flow stream passed through. The pH value of the filter bed could maintain in the 6.9–7.2 range during the operation period due to the composite bead has the phosphate buffer capacity. The percentage of ethyl acetate removal could remain at over 99% for 40 days operation while the composite beads adsorbed inorganic nitrate nutrients. The pressure drop of two kind composite beads and pig manure compost filter beds are 0 and 2 mm H₂O, respectively, after operating for 40 days.     

Activated fly ash/slag blended cement

This paper presents the results of the preparation of an ecological cementing material from granulated blast-furnace slag (GBFS) and Class C fly ash (CCFA). The desulphurization gypsum, calcined at 600–800 °C for 0.5–1.5 h, works as the main ingredient of the activator in the cementing material. The optimized formulation of the cementing material was obtained with the aid of factorial design method: slag, 70%; CCFA, 18%; activator, 12%. The “partial super-fine grinding process” was adopted to improve the performance, i.e., 85% of the mixture is ground to Blaine fineness of 3500 cm²/g, 15% further ground to around 5000 cm²/g. The compressive strength of 28 days of the cement mortar is up to 49 MPa and flexural strength 8.4 MPa. The hydration products, investigated by SEM and X-ray diffraction, are mainly ettringite and C–S–H gel.