GJB 150A淋雨试验强化试验程序数值模拟和试验装置设计研究

目的 研究GJB 150.8A—2009《军用装备实验室环境试验方法第8部分:淋雨试验》中强化试验程序的工程实现方法.方法 在标准解读的基础上,以强化试验程序用喷嘴为对象,建立数值模型,分析喷嘴在强化试验程序过程中的流场分布,并基于分析结果给出强化试验程序试验装置设计的思路和方法.结果 在喷嘴内,压力变化剧烈,极短距离内由276 kPa迅速降至101 kPa.水流经过喷嘴经历了激烈的加速过程,从距离喷嘴出口0.01～0.4 m,水流速度从251 m/s迅速降至17.8 m/s,到远场趋于稳定.结论 分析结果对指导强化试验程序的试验装置的设计和试验实施具有重要参考意义.     

正己烷萃取—此外分光光度法测定矿井水中微量油

在进行矿井水中油类分析时，用正己烷作为萃取剂，以工作曲线代替标准曲线，从而使油平均回收率增加到96％以上。并在正己烷用量、水样预处理等测试参数选择上做了条件试验。     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

硫代氨基甲酸盐提取工业废水中的锌离子

本文主要探索了金属离子络合剂———硫代氨基甲酸盐的合成制备 ,并通过其对锌离子的络合作用 ,以达到脱除金属离子的目的 .实验表明 ,由吗啡啉合成制得的硫代氨基甲酸盐 锌离子络合剂在酸性废水中 ,对锌离子具有良好的络合能力 .通过对废水中金属锌离子的脱除工艺条件的相应探索 ,发现在体系的pH =2～ 6范围内 ,硫代氨基甲酸盐对锌离子的脱除率均达99 %以上     

超临界水处理有机废物研究新进展

超临界水处理废物以通过添加氧化剂的超临界水氧化和不加氧化剂的超临界水萃取两种方式实现，超临界水氧化应用较多，与其它废物处理技术相比有显著优点。本文总结了超临界水氧化流程和反应机理，评述了添加剂，温度，压力及停留时间，催化剂等对超临界水氧化反应的影响，同时介绍了超临界水氧化和超临界水萃取的最新应用研究状况及尚需解决问题。     

陆架浅海沉积物-海水界面溶质通量的计算方法及其应用

陆架浅海沉积物—海水界面上的溶解态生源物质通量的准确估算是海洋生态系统动力学研究中的关键性问题之一。由于底栖生物活动以及海流、海浪及潮波与海底地形地物相互作用的影响 ,使得该通量的准确估算十分困难。本文综合分析讨论了近年来提出的各种计算该类通量的物理模型及参数的确定方法 ,并结合在中国黄、东海等陆架浅海水层—底栖生态动力学耦合模型研究的需要 ,比较深入地讨论了应用过程中应该考虑的几个问题     

Factors associated with multiple-pass procedures during chorionic villus sampling: A video analysis

Multiple placental passes during chorionic villus sampling (CVS) increase the risk of fetal loss; however, specific factors that predispose to repeat aspiration have not been delineated. To identify anatomic and technical variables associated with multiple-pass procedures, a detailed review of 205 videotaped CVS procedures (single pass = 163; multiple pass = 42) was performed, blinded to pregnancy outcome. The route of sampling did not influence the need for multiple aspiration attempts (transabdominal—30/ 135; transcervical—12/70), nor was placental location alone discriminatory. However, the combination of a posterior placenta and uterine retroversion was observed more frequently in the multiple-pass cohort (8/42 vs. 9/163; p<0.05). In transabdominal cases, suboptimal needle placement (e.g., perpendicular to the placental long axis) was more common in the initial aspiration of a multiple-pass procedure (21/30 vs. 38/105;p<0.01), while limited penetration of the catheter tip (e.g., just inside the placental edge) characterized a majority of multiple-pass cases in the transcervical subset (7/12 vs. 3/58; p<0.0001). A case-control cohort was constructed to evaluate the impact of these technical variables on sampling efficacy, independent of the influence of uterine position and placental site. In that analysis, suboptimal location and/or orientation of the sampling device remained characteristic of multiple-pass cases. We conclude that further reduction in the frequency of multiple-pass procedures might be achieved by consistent placement of the device tip in the central placental mass. Unlike amniocentesis, where any point of amnion entry will suffice, this technical nuance should be emphasized with CVS to maximize the single-pass success rate.     

北京市工业废水和城市污水中菊酯类农药残留分析

建立了基于18C固相萃取柱和气相色谱/电子捕获（GC/ECD）分析水体中环境激素类物质--菊酯类农药的分析方法,并对方法的回收率、灵敏度进行了评价,同时分析了北京市七类典型污染点源50个采样点位菊酯类农药的浓度,检出的菊酯类农药包括联苯菊酯、氰戊菊酯、氯氰菊酯和溴氰菊酯,其检出率都较低,低于22%.检出菊酯类农药的浓度范围是0.013～1.246μg/L.该方法对菊酯类农药的回收率达到67.7%～96.2%,检测限为0.010～0.015μg/L.溴氰菊酯在废水排放中的达标率为100%.     

小清河干流底质有毒金属形态分布

以小清河干流底质为研究对象，为了更好地了解固体颗粒物上有毒金属被浸取进入液相情况．分析了三种不同浸取剂(DTPA、EDTA、NTA)的提取液中有毒金属Pb、Cr、Cu、Zn、Cd的含量。结果表明．金属浓度因浸取剂种类及金属本身类型不同而不同。由于固体颗粒物上金属的毒性及其可流动性与其存在形态密切相关。选取连续浸取法来考察底质样品中金属形态分布情况。结果表明．底质中Pb主要以氧化物键合态和碳酸键合态存在；Cr主要以有机键合态存在；Cu以有机键合态为优势存在；Zn主要以有机键合态和氧化物键合态存在；Cd主要以可交换态存在。     

络合萃取技术在苯胺-硝基苯废水处理中的应用研究

选用20％三烷基胺 80％加氢煤油作为萃取荆，进行四级萃取实验，探讨络合萃取技术处理苯胺-硝基苯废水工业化的可能性。实验结果表明，采用三烷基胺一加氢煤油混合溶剂对苯胺-硝基苯废水进行萃取，具有相当高的COD去除率。