Speciation of particulate trace metals in sediments of Anarbe reservoir∗

Total concentration and chemical forms of heavy metals in samples of sediment from a drinking water reservoir have been analysed. The result of total metal contest shows Fe and Mn concentration increase along the reservoir, from 4.4% in Fe and 0.07% in Mn in the end part to 6.4% Fe and 0.22% Mn at the dam. However, a decrease in organic matter along the reservoir is observed. In order to test the accuracy of the digestion methods used, a standard reference material was also analysed.

Trace metal concentrations, with exception of Cadmium, Pb and Mn, found in fraction 5 are higher than those observed in the others extractions, Fe, Ni, Zn, Cr and Cu content in non‐residual fraction is found mainly in moderately reducible fraction, but the percentage of this fraction in each metal is very different.     

Speciation of heavy metals in sediments from the Scheldt estuary,Belgium

A simple three-step sequential extraction procedure was applied to study the speciation of heavy metals in sediment from Scheldt estuary, and their relationship to sediment grain size and organic matter content. The sedimentary metal content was fractionated into carbonate and exchangeable, metals bound to organic matter and residual fractions. Sedimentary total metal content was also determined using an industrial microwave (ETHOS 900) HF/HNO₃ extraction method. The extracts were analysed for metals using inductively coupled plasma atomic emission spectrometry. The bioavailable fraction (exchangeable and metals bound to organic matter) comprised less than the other forms. Residue metals were the dominant form of metals in almost all studied sites. The average total metal content for the studied sites decreased in the order Fe>Cr>Cu>Co>Zn>Pb>Cd. Based on average values for the studied sites, the highest bioavailable metals in sediments were Cd (38%) from Westkapelle, Zn (17%) from Yerseke, Co (12%) from Domburg, Cr (9%) from Vlissingen, Fe and Pb each (2%) from Yerseke, and Cu (1%) from Domburg. Metal recovery was good, with<10% difference between the total metal recovered through the extractant steps and the total metal determined using HF/HNO₃ extract.     

A comparative study of three different methods for the sequential extraction of heavy metals in soil

Three different methods for the sequential extraction of heavy metals from soil (viz those of Tessier et al. (A. Tessier, P.G. Campbell and N. Bisson (1979). Anal. Chem., 51, 844.), Sposito et al. (G. Sposito, L.J. Lund and A.C. Chang (1989). Soil. Sci. Soc. Am. J., 46, 260.) and Mann and Ritchie (S.S. Mann and G.S.P. Ritchie (1993). Aust. J. Soil Res., 31, 255.)) were examined in terms of the distribution of Cu, Zn and Pb in the soil phases and the bioavailability of these elements in soil. To this end, several samples of soils polluted with metals from a copper mine were fractionated by using the three studied methods and analyzed by atomic absorption spectrometry. The results revealed differences in extraction efficiency among the methods due to the extractant used, or its concentration, and to the soil/solution ratio. The three methods were found to provide accurate heavy metal background contents. However, the method of Tessier et al. is to be preferred for quantifying increased levels of heavy metals on account of its high extraction power.     

基于范例推理的灾害性地震应急物资需求预测研究

基于范例推理(CBR)理论,利用最近相邻法和粗糙集理论搜索相似度最高的主震历史范例,分析各主要物资需求量的影响因素,预测当前范例主震期应急物资需求量。通过序贯决策,采用马尔科夫预测模型预测余震类型,进而搜索余震历史范例,预测余震期应急物资需求量。以"玉树"地震为例,运用该方法估算地震发生后食物类、生活用品类、药品类、工程机械类的需求量。     

逐级提取(SEE)技术及其在沉积物和土壤元素形态研究中的应用

概述了元素形态的研究方法,介绍了SEE技术及其在沉积物、土壤元素形态研究中的应用,并就该技术在元素形态研究中的作用、实现标准化的可能性及难度、未来发展趋势等问题进行了探讨,得出了以下三点认识:(1)SEE技术是目前沉积物、土壤元素形态研究的必要手段,但其在未来元素形态研究中的作用,在很大程度上取决于技术本身的标准化和新发展以及其它形态分析方法的发展;(2)根据研究目的,系统研究不同样品的采集和预处理方法、试剂种类和浓度以及操作条件等元素形态影响因素,对现有流程进行改进或提出新的更合理的流程,作为SEE技术的标准流程,是必要且可能的,但其任务也是艰巨的;(3)SEE技术可能向两个趋势发展,分别形成微波加热-连续流-逐级提取(MCSE)技术以及微波加热-超声波震荡-动力学-平行提取(MUKPE)技术。     

QuickPanel在油浆过滤自动控制系统中的应用研究

阐述了油浆过滤控制系统的硬件配置、分程控制及顺序控制等．通过控制系统的控制,过滤器A、B轮流进行过滤、再生步骤,将油品内51μm以上的颗粒过滤掉,达到提高油品质量、延迟装置检维修期的目标．图1,参5．     

干法烟气脱硫副产物中汞的形态分布

通过分析干法烟气脱硫副产物中不同形态汞的含量,研究干法脱硫灰中汞的环境稳定性. 利用逐级化学提取法,分析了锅炉底灰、锅炉飞灰、脱硫塔底灰和除尘器灰中水溶态、酸溶态、过氧化氢溶态及王水溶残渣态汞的含量,研究了不同形态汞含量的变化规律. 结果表明,锅炉底灰、锅炉飞灰、脱硫塔底灰和除尘器灰中w（总汞）分别为0.23,0.36,0.46和1.22 mg/kg,且随着脱硫除尘时间的延长w（总汞）呈增加的趋势,其中,以氯化物、硝酸盐和硫酸盐存在的水溶态汞变化明显,除尘器灰中w（水溶态汞）高达0.72 mg/kg. 分析认为,干法烟气脱硫灰吸附的大部分汞蒸气转化为可溶性的氯化物、硝酸盐和硫酸盐等,另外还有少量汞以单质状态存在.      

Characteristics of aerobic granules grown on glucose a sequential batch shaking reactor

Aerobic heterotrophic granular sludge was cultivated in a sequencing batch shaking reactor(SBSR) in which a synthetic wastewater containing glucose as carbon source was fed. The characteristics of the aerobic granules were investigated. Compared with the conventional activated sludge flocs, the aerobic granules exhibit excellent physical characteristics in terms of settleability, size, shape, biomass density, and physical strength.Scanning electron micrographs revealed that in mature granules little filamentous bacteria could be found, rod-shaded and coccoid bacteria were the dominant microorqanisms.     

厌氧-准好氧运行加速生物反应器填埋场垃圾稳定的研究

通过厌氧型、好氧型和准好氧型生物反应器填埋场的比较,提出了厌氧-准好氧联合运行加速生物反应器填埋场垃圾降解和稳定的填埋场运行方法,并通过模拟试验进行了研究.结果表明,按厌氧方式运行710 d的模拟垃圾柱改为按准好氧方式运行360 d后,每天回灌1次的D1柱和每周回灌2次的D4柱渗滤液COD浓度分别由705 mg/L和669 mg/L下降到135mg/L和178 mg/L,氨氮浓度由650 mg/L和877 mg/L降到不能检出水平;而继续按厌氧方式运行的垃圾柱D2和D3的渗滤液COD浓度仅分别由435mg/L和852 mg/L下降到295 mg/L和596 mg/L,氨氮浓度由654 mg/L和1 107 mg/L下降到469mg/L和783 mg/L.模拟厌氧型生物反应器填埋场垃圾柱稳定后期改为按准好氧方式运行,能加快渗滤液COD和氨氮浓度的衰减速率,而较高的渗滤液回灌频率更能强化这一优势.     

城市污泥中铜锌的化学形态及其去除

利用连续提取法研究了城市污泥中铜和锌的化学形态,结果表明:污泥中铜和锌都以稳定性较好的硫化物及有机结合物、残渣态形式存在,生物毒性较小,通过适当处理后可以安全加以利用;在此基础上,研究了利用乙酸和双氧水去除污泥中铜和锌的适宜工艺条件,结果表明:在室温条件下,在pH值为4的环境中,利用添加H_2O_2的浓度为2mol/L的乙酸溶液,反应时间为4h,就可以将污泥中超过95%以上的铜和锌淋滤去除。