三峡库区沙坝沟滑坡影响因素分析与稳定性评价

在不同工况下,通过采取不同的岩土体物理力学参数来计算沙坝沟滑坡的稳定系数并分析影响因素,得到影响该滑坡稳定性的主要因素为降雨、地下水作用及人类工程活动,在一定条件下可能成为滑坡失稳破坏的诱导因素。最后为滑坡防治提出一些建议,对滑坡的预测和防护提供依据。     

Structural-temporal organization of a rodent community in the Teletskaya Taiga,Altai Mountains

The structural-temporal organization of a murine rodent community in the taiga has been studied near Lake Teletskoe, Mountain Altai. The results show that the long-term dynamics of indices characterizing community diversity depend mainly on changes in the structure of dominance rather than on the population dynamics of species. The distribution of species in the factor space corresponds to their preference for certain biotopes, from dry to relatively moist. An analysis of relationships within the rodent community has revealed the synchronous dynamics of species abundance and antiphase pattern of changes in the structural indices of dominant species.     

堆石坝加筋坝坡稳定性数值模拟研究

地震作用下堆石坝坝顶堆石的稳定性值得关注。对格栅加筋堆石坝坝坡稳定性的影响进行了数值模拟;用拟静力法模拟水平和竖直向地震动荷载,运用考虑地震荷载的瑞典圆弧滑动法,对坝体整体和坝顶局部区域坝坡稳定性进行了模拟研究;对格栅加筋堆石坝的机理进行了探讨。计算结果表明,加筋可以有效提高坝顶局部区域的抗震性能和坝坡稳定安全系数,且随着格栅加筋层数和格栅抗拉强度的增加,其加筋效果愈加显著。     

Identification of key parameters controlling dissolved oxygen migration and attenuation in fractured crystalline rocks

In the crystalline rocks of the Canadian Shield, geochemical conditions are currently reducing at depths of 500-1000 m. However, during future glacial periods, altered hydrologic conditions could potentially result in enhanced recharge of glacial melt water containing a relatively high concentration of dissolved oxygen (O2). It is therefore of interest to investigate the physical and geochemical processes, including naturally-occurring redox reactions, that may control O2 ingress. In this study, the reactive transport code MIN3P is used in combination with 2k factorial analyses to identify the most important parameters controlling oxygen migration and attenuation in fractured crystalline rocks. Scenarios considered are based on simplified conceptual models that include a single vertical fracture, or a fracture zone, contained within a rock matrix that extends from the ground surface to a depth of 500 m. Consistent with field observations, Fe(II)-bearing minerals are present in the fractures (i.e. chlorite) and the rock matrix (biotite and small quantities of pyrite). For the parameter ranges investigated, results indicate that for the single fracture case, the most influential factors controlling dissolved O2 ingress are flow velocity in the fracture, fracture aperture, and the biotite reaction rate in the rock matrix. The most important parameters for the fracture zone simulations are flow velocity in the individual fractures, pO2 in the recharge water, biotite reaction rate, and to a lesser degree the abundance and reactivity of chlorite in the fracture zone, and the fracture zone width. These parameters should therefore receive increased consideration during site characterization, and in the formulation of site-specific models intended to predict O2 behavior in crystalline rocks.     

确定岩体斜坡滑动面抗剪强度的动态反分析方法

滑动结构面的抗剪强度在岩体滑坡的稳定性计算中是最重要的参数,也是最难以确定的。基于岩体抗剪强度是多种因素影响下的随机变量这一认识前提下,本文以西柏坡“中共中央解放军总部”旧址滑坡为例提出了确定岩体斜坡滑动面抗剪强度的动态反分析方法,并对该方法获得的抗剪强度的实用性进行了分析。结果表明,反分析方法是获得岩体斜坡滑动面抗剪强度的最经济、合理的途径。     

内排压脚与边坡稳定性的关系

为了研究边坡角及边坡形状与边坡稳定性的关系,采用有限元软件ANSYS模拟了不同边坡角对应的稳定系数,以及不同平盘宽度和压脚高度所形成的等储备强度边坡的稳定系数。模拟中假设材料符合相关联的理想弹塑性本构关系,强度准则符合Drucker-Prager准则,用计算收敛性作为边坡稳定性的准则,用强度折减法得出边坡的稳定系数。为了形成等储备强度边坡,由下到上分步骤进行压脚。先在平面边坡最下台阶压脚,这样提高了边坡稳定系数,在边坡进入临界状态时,最下两台阶的塑性状态相同,则压脚停止;再在最下两台阶同时压脚,在边坡进入临界状态时,最下3个台阶的塑性状态相同,则压脚停止;以此类推,在最下边n个台阶同时压脚,在边坡进入临界状态时,压到与第n+1个台阶的塑性状态相同为止。结果表明,边坡总是从坡脚开始形成塑性区,在重力加载过程中,塑性区以弧形条带向坡顶扩展,形成滑带。最有效的内排压脚是从最下台阶开始形成等储备强度边坡的压脚。     

围岩稳定性评价的改进物元可拓模型与应用

为弥补现有地下工程围岩稳定性评价方法的不足,建立了改进的物元可拓模型。通过构造一种新的关联函数,解决了因传统的物元可拓模型的关联函数是一个分段函数而存在的不便于计算的缺陷,以及评价指标间的互不相容性问题,拓宽了物元可拓法的应用范围。将改进的物元可拓模型应用于某地下工程围岩的稳定性评价,结果表明,样本1、2、5属于Ⅱ级(较稳定),样本3、4属于Ⅰ级(稳定)。通过将其评价结果与传统可拓法及模糊数学综合评判结果进行比较分析,证明该评价方法的正确性。研究表明,改进的物元可拓模型的评价结果与实际工程地质情况更为吻合,准确度更高,能够反映各因素对围岩稳定性的影响,其合理性和可行性得到了验证。     

Effect of urea on detonation characteristics and thermal stability of ammonium nitrate

A study has examined the effect of urea on the thermal stability and detonation characteristics of ammonium nitrate (AN). The thermal decomposition temperature and surface morphology of samples were investigated by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). For further research on the thermal sensitivity and shock sensitivity of the samples, the Koenen test and UN gap test were conducted. The results indicate that urea can substantially increase the thermal stability of AN (the greatest exothermic peak is increased by more than 100 °C) and reduce the thermal sensitivity of AN. However, AN-50wt. % urea mixtures can still produce a steady detonation in the UN gap test. Urea cannot reduce the ability to propagate a detonation. Possible explanations for these results are discussed.     

Application of a hydroxylamine nitrate stability model to plutonium purification process equipment

A mathematical model that predicts hydroxylamine nitrate (HAN) (NH₂OH·HNO₃) stability is applied to aqueous solutions containing HAN, nitric acid and plutonium that are used in plutonium purification processes. The model estimates the stability of these solutions with respect to the rapid, hazardous, autocatalytic reaction of HAN with nitric acid that generates heat and gas. It also accounts for reaction kinetics, temperature changes, gas generation rates, solution volumes and flow rates, and distribution of plutonium and nitric acid between aqueous and organic phases. The model is applied to three typical process vessels used in solvent extraction purification of plutonium – a countercurrent aqueous/organic plutonium stripping column, an oxidation column used for HAN and hydrazine destruction, and a plutonium rework tank. Both normal and off-normal process scenarios are modeled. Two of the off-normal scenarios lead to the rapid autocatalytic reaction of HAN with nitric acid where heat and gas are generated and that could lead to damage of the process equipment and/or release of hazardous plutonium solution from the vessel. In these two cases, stationary aqueous solutions containing HAN, Pu(III), and nitric acid were allowed to slowly react until conditions for the autocatalytic reaction were reached.