微波技术在固体废弃物处理中的应用

介绍了微波加热的基本原理,综述了微波技术在工业污泥、医疗垃圾、废旧轮胎、电子垃圾以及建筑垃圾等固体废弃物处理中的应用现状,展望了微波技术在污染控制领域的应用前景.     

全白土催化剂生产废水的处理

用4种无机絮凝剂和3种有机絮凝剂进行了脱除全白土催化剂生产废水（简称废水）中固体悬浮物（SS）的实验研究。实验结果表明：在废水pH6．8条件下，无机絮凝剂和有机絮凝剂脱除废水中SS的效果均较差，用无机絮凝剂时的SS去除率低于26％，用有机絮凝剂时的SS去除率低于18％；废水pH对SS去除率的影响较大，当调节废水pH为8．0时，无机絮凝剂中硫酸铝脱除废水中的SS效果最好，在硫酸铝加入量为0．02mg／L、沉降时间为2h的最佳操作条件下，SS的去除率可达93％。     

安庆石化热电厂正压浓相气力输灰系统

详细介绍了安庆石化热电厂正压浓相气力输灰系统的组成、特点及运行情况。该系统自投运以来，运行情况良好。     

事故前期发展过程浅析

任何事故发生之前都有一段发展演变的过程.当失误不断积累,超过系统或组织自身的自适应能力以后,一旦激发事件出现,就有可能导致事故的发生.本文在分析事故致灾条件的基础上,将其前期发展过程分为了7个阶段,得出了事故前期发展过程流程图.     

综合防尘技术在煤矿的应用实践

粉尘严重威胁矿井安全生产和职工身体健康。公司依靠科学管理，完善了各项综合防尘管理制度，制定了一系列综合防尘方面的管理规定和防尘技术操作规程；加强技术创新，重点抓好综采、综掘工作面以及回风系统和定点尘源的装置，实行自动控制等综合防尘技术；从管理和技术创新角度，通过采用减少粉尘产生、降尘、排尘、除尘、个体防尘等综合防尘技术措施应用实践，取得了良好的效果。     

抽出式通风煤巷掘进过程中粉尘浓度分布规律的数值模拟

根据气固两相流理论，针对矿井掘进工作面的特点，采用计算流体力学的离散相模型（DPM）对掘进工作面通风过程中粉尘浓度进行数值模拟，总结抽出式通风掘进巷道中粉尘浓度的沿程分布及变化规律。     

城市可降解生活垃圾的生物综合处理模式初探

针对现有城市生活垃圾处理方式的不足,结合垃圾生物处理特点,设计了集混合菌群降解、生物过滤除臭、污水回用及植被绿化于一体的立体处理体系。结果表明,该系统在城市生活垃圾的“三化”处理中具有显著的潜势:既使生活垃圾在食物链外形成安全的闭路循环,防止有害物质向人居环境入渗;同时,处理设施的立体化、终产物的生物转化以及即刻的市场效应,有效地增强了系统的消纳能力,缓解了传统处理方式对城市空间的压力。该系统对我国中小城市生活垃圾的综合利用具有积极的参考价值。     

山东省城市生活垃圾管理现状及对策

随着经济的发展,城市生活垃圾逐渐成为山东省面临的重大问题.系统分析了山东省城市生活垃圾的收运及处理现状,并对其对策进行了讨论,认为山东省应立足现实,完善城市生活垃圾管理体系;对城市生活垃圾分类收集,以源头控制为主,并逐步改进现有的较为单一的卫生填埋技术;尝试应用多种先进的综合处理新技术,改变传统的思维模式,加快城市生活垃圾处理市场化、产业化的步伐,走可持续发展之道路.     

Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

Effects of planned expansion of waste incineration in the Swedish district heating systems

Recent targets for reduced amounts of waste to landfills in Sweden will result in a large increase in waste incineration with recovery of energy, used primarily for district heating. The aim of this study is to investigate what changes in the usage of other fuels and technologies for district heat production would be caused by this increase. A questionnaire was sent out to the largest district heating companies, and simulations in an energy systems model were carried out. The analysis shows that increased waste incineration reduces the demand for other fuels, especially biomass, for district heat production. The effects include reductions in operating hours as well as the avoidance or postponement of investments in new plants for district heat production. Increased waste incineration will also lead to a greater use of district heating in Sweden.